Jbc DMVE-A Bedienungsanleitung

Premium 4 Tools Rework

Station with Pneumatic Pump

Ref. DMVE-A

INSTRUCTION MANUAL

www.jbctools.com

DME Control Unit ......... 1 unit

Ref. DME-1A (120V)

DME-2A (230V)

DME-9A (100V)

Pneumatic Desoldering

Module ............................. 1 unit

Ref. MVE-A

Packing List

The following items should be included:

Stand Cable ................ 2 units

R ef. 0 01128 3

Stand ................. 1 unit

Ref. AD-SE

Sponge ............................ 1 unit

Ref. S0354

Metal Brush .................... 1 unit

Ref. CL6217

Module Cable ............... 1 unit

R ef. 0 014 874

Brass Wool ..................... 1 unit

Ref. CL6210

Desoldering

Iron ..................... 1 unit

Ref. DR560-A

Stand ................. 1 unit

Ref. DR-SE

Power cord ..................... 1 unit

Ref. 0010569 (230V)

0013671 (100/120V)

General Purpose

Handle ............... 1 unit

Ref. T245-A

ESD Tip Cleaner ........... 1 unit

Ref. CL8499

Check our website for the corresponding manuals. Also available in other languages.

Premium 4 Tools Rework

Station with Pneumatic Pump

Ref. DMVE-A

Manual ............................. 1 unit

Ref. 0 020517

DR560 Accessories

R ef. 0 010 211

Internal gasket .......... 1 unit

Ref. 0019208

It contains 2 gaskets

Filter Box .................... 1 unit

Ref. 0780840

It contains 10 filters

Spanner ...................... 1 unit

Ref. 0780550

Glass solder

collector ...................... 1 unit

Ref. 0812620

Metal solder

collector ...................... 1 unit

Ref. 0812630

Tips ............................. 3 units

Ref. C560005 (x1)

Ref. C560013 (x1)

Ref. C560004 (x1)

Tip cleaning set .................................... 1 unit

Ref. 0965970

Long Tip Cleaning set ........................ 1 unit

Ref. 0965760

Suction Filter ................. 1 unit

Ref. 0821830

Cotton Filter ....................1 unit

Ref. 0781046

It contains 10 filters

Cleaning stick .................1 unit

Ref. 0786640

Cartridges .................... 2 units

Ref. C245903 / C245906

Filter Box ..........................1 unit

Ref. 0005966

It contains 50 filters

Venturi Filter ....................1 unit

Ref. 0008446

Union Flanges ............... 1 unit

R ef. 0 0113 56

www.jbctools.com

RJ12 connector for Robot

USB-B connector

Equipotential connection

Power Socket

RJ12 connector for PSE

RJ45 connector for LAN

Stand

Ref. DR-SE

Stand Cable

R ef. 0 01128 3

Features

Work simultaneously with up to 2 tools and join each station port with 1 module + 1 pedal (Peripherals).

Stand

Ref. AD-SE

Desoldering Iron

Ref. DR560-A

General

Purpose

Handle

Ref. T245-A

Speaker

Suction Filter

Ref. 0821830

Module Cable

R ef. 0 014 874

Air pressure (4-6 bar)

Pneumatic Desoldering Module

Ref. MVE-A

To another peripheral

To Pedal

Ref. P-005

USB-A connector

3.5” Color TFT Touch screen

Tilt the display

for easy reading

www.jbctools.com

- Replace a blown fuse as follows:

- Replace any defective or damaged pieces. Use original JBC spare parts only.

- Repairs should only be performed by a JBC authorized technical service.

Maintenance

Before carrying out maintenance or storage, always allow the equipment to cool.

- Clean the station screen with a glass cleaner

or a damp cloth.

1. Pull off the fuse holder and remove the

fuse. If necessary use a tool to lever it off.

2. Press the new fuse into the fuse holder

and replace it in the station.

- Use a damp cloth to clean the casing and the

tool. Alcohol can only be used to clean the

metal parts.

- Periodically check that the metal parts of the

tool and stand are clean so that the station

can detect the tool status.

Fuse holder

- Maintain tip surface clean and tinned prior to

storage in order to avoid tip oxidation. Rusty

and dirty surfaces reduce heat transfer to the

solder joint.

- Periodically check all cables and tubes.

Fuse

Safety

- Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire.

- The power cord must be plugged into approved bases. Be sure that it is properly grounded

before use. When unplugging it, hold the plug, not the wire.

- Do not work on electrically live parts.

- The tool should be placed in the stand when not in use in order to activate the sleep mode.

The soldering tip, the metal part of the tool and the stand may still be hot even when the station is

turned off. Handle with care, including when adjusting the stand position.

- Do not leave the appliance unattended when it is on.

- Do not cover the ventilation grills. Heat can cause inflamable products to ignite.

- Avoid flux coming into contact with skin or eyes to prevent irritation.

- Be careful with the fumes produced when soldering.

- Keep your workplace clean and tidy. Wear appropriate protective glasses and gloves when

working to avoid personal harm.

- Utmost care must be taken with liquid tin waste which can cause burns.

- This appliance can be used by children over the age of eight and also persons with reduced

physical, sensory or mental capabilities or lack of experience provided that they have been given

adequate supervision or instruction concerning use of the appliance and understand the hazards

involved. Children must not play with the appliance.

- Maintenance must not be carried out by children unless supervised.

It is imperative to follow safety guidelines to prevent electric

shock, injury, fire or explosion.

www.jbctools.com

Specifications

4 Tools Rework station with Pneumatic Pump

DMVE-1A /DMVE-2A / DMVE-9A

- Total weight: 10,1 kg (22.3 lb)

DME-1A 120V 50/60Hz. Input fuse: 6A. Output: 23.5V

DME-2A 230V 50/60Hz. Input fuse: 3.15A. Output: 23.5V

DME-9A 100V 50/60Hz. Input fuse: 8A. Output: 23.5V

- Weight: 4,6 kg (10 lb)

- Dimensions: 148 x 120 x 232 mm (5.83 x 4.72 x 9.13 in)

- Output Peak Power: 160W per tool

- Temperature Range: 90 - 450 °C (190 - 840 ºF)

- Idle Temp. Stability (still air): ±1.5 ºC (±3 ºF)

- Ambient Operating Temperature: 10 - 40 ºC (50 - 104 ºF)

- Tip to ground resistance: <2 ohms

- Tip to ground voltage: <2mV RMS

- RJ12 connectors: 1 for Robot and 1 for PSE Power Supply Control Unit.

- RJ45 connector for LAN (Ethernet)

- USB-A / USB-B / Peripherals connectors

MVE-A

- Weight: 0,7 kg (1.54 lb)

- Dimensions: 145 x 55 x 225 mm (5.71 x 2.17 x 8.86 in)

- Air Pressure supply range: 4 - 6 Bar

- Vacuum at 6 Bar: 90% / 680 mmHg / 26.8 inHg

- Flow rate: 15 SLPM

Complies with CE standards.

ESD protected.

产品中有害物质的名称及含量

有害物质含量表

部件名称

有害物质

铅(Pb) 汞(Hg) 镉(Cd) 六价铬

(Cr(VI))

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

烙铁头 O O O O O O

手柄 O O O O O O

电源线 O O O O O O

主机 O O O O O O

电源插座 O O O O O O

保险丝 O O O O O O

主开关 O O O O O O

电位连接 X O O O O O

变压器 O O O O O O

线路板 X O O O O O

O 表示该有害物质在该部件所有均质材料中的含量均在GB/T 26572 规定的限量要求以下。

X 表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572 规定的限量要求。

www.jbctools.com

Exploded View

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere jbc Lötpistole Handbücher

Beliebte Lötpistole Handbücher anderer Marken

Bakon

Bakon 3200 Bedienungsanleitung

Proxxon

Proxxon Gaslotset MGS Bedienungsanleitung

HAKO

HAKO FX-8804 Bedienungsanleitung

SATA

SATA 02002A Bedienungsanleitung

Velleman

Velleman HRJA151 Bedienungsanleitung

Weller

Weller WSM 1 Bedienungsanleitung

Vishay Precision Group

Vishay Precision Group Micro-Measurements Mark V Montageanleitung

ersa

ersa i-CON 1V Bedienungsanleitung

Hakko Electronics

Hakko Electronics FX-100 Bedienungsanleitung

Weller

Weller WAD 101 Bedienungsanleitung

Weller

Weller WXD 2 Bedienungsanleitung

AlienTek

AlienTek T100 Bedienungsanleitung

Atten

Atten ATETOOL AT-689A Bedienungsanleitung

Surtek

Surtek 112554 Abmessungen und Installationsanleitung

Parkside

Parkside PLBS 30 A1 Bedienungsanleitung

BlackJack SolderWerks

BlackJack SolderWerks BK8000 Bedienungsanleitung

Weller

Weller WX1 Bedienungsanleitung

multicomp pro

multicomp pro MP740893 Bedienungsanleitung

jbc DMVE-A Bedienungsanleitung

Beliebte Lötpistole Handbücher anderer Marken