Jbc CS2R245-A Bedienungsanleitung

Cartridge Stand for Automation

Ref. CS2R245-A / CS2R470-A

www.jbctools.com

Cartridge Stand for Automation .......... 1 unit

Ref. CS2R245-A

CS2R470-A

Screw .............................. 1 unit

DIN 912 M6x20

Ref. 0842925

Washer ............................ 1 unit

DIN 125 Ø6.4 mm

Ref. 0842925

Manual .............................. 1 unit

Ref. 0021526

Packing List

The following items should be included:

Ref. CS2R245-A /CS2R470-A

Cartridge Stand for Automation

www.jbctools.com

Features

Mounting Hole

Gripper Actuators

Gripper Actuator

Fluid Air

Applicable tubing Ø4mm

Operating pressure 0,15 to 0,7 MPa

A Tube connection to fix cartridges

B Tube connection to release cartridges

The CS2R is designed to be used in

automatic soldering processes. Thanks to

the Gripper Actuators, it allows to hold the

cartridges while they are not in use.

It can be used in combination with

Automatic Soldering Irons (TRA) and the

new Cartridges for Automation (R245 and

R470 ranges).

Assembly

The CS2R comes with a mouting hole, that serves to fixing it at the robot work place area. Use

DIN912 M6 screws to attach it.

The Gripper Actuator must be connected to an air-circuit by using the tube connections Aand B.

www.jbctools.com

Push Button

Handle

Compatible Cartridges

Find the cartridge models that best suits your soldering needs in www.jbctools.com

Compatibility

Cartridge

Stand

Cartridge Range Control Unit Soldering Irons

R245 R470 UCR245 UCR470 TRA245 TRA470

CS2R245

CS2R470

Chisel

Ref. R245002

Through hole

Ref. R245004

Chisel

Ref. R470008

Through hole

Ref. R470012

Through hole

Ref. R470003

Range 245 Range 470

Work Position Adjustment

The CS2R can be turned up to 35º in both

directions to facilitate the tip’s insertion.

To pivot the CS2R, loosen anf tighten the

handle to turning it. The Handle can be aligned

vertically again by pressing the Push Button.

Dimensions

(in)

www.jbctools.com

*Not included, sold separately

Work Place Example

Solder Feeder*

Ref. SFR-A

Automatic Tip

Cleaner*

Ref. CLMR-A

Soldering Head*

Ref. RBA-A

Automatic Soldering Iron*

Ref. TRA245-A

TRA470-A

Automatic Cartridge Stand

Ref. CS2R245-A

CS2R470-A

Control Unit*

Ref. UCR245-5A

UCR470-5A

Guide Kit*

Ref. GSFR

It is imperative to follow safety guidelines to prevent electric shock,

injury, fire or explosion.

Maintenance

- Before carrying out maintenance, always unplug the device.

- Use a damp cloth to clean the device. Alcohol can only be used to clean the metal parts.

- Periodically check that the metal parts of the device are clean.

- Periodically check all cables and tube connections.

- Replace any defective or damaged pieces. Use original JBC spare parts only.

- Repairs should only be performed by a JBC authorized technical service.

- Under normal operating conditions, the air gripper lifespan is 10 million cycles. It is recommended

to replace it at the end of its lifespan.

- Do not use the device for any other purpose.

- The temperature of accesible surfaces may remain high after the unit is turned off. Handle with

care.

- Do not leave the appliance unattended when it is on.

- Avoid flux coming into contact with skin or eyes to prevent irritation.

- Be careful with the fumes produced when soldering.

- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when

working to avoid personal harm.

- Utmost care must be taken with liquid tin waste which can cause burns.

Safety

www.jbctools.com

This product should not be thrown in the garbage.

In accordance with the European directive 2002/96/EC, electronic equipment at the end of their life

must be collected and returned to an authorized recycling facility.

Manual in other languages available on our website

www.jbctools.com

Warranty

JBC’s two-year warranty covers this equipment

against all manufacturing defects, including the

replacement of defective parts and labour.

Warranty does not cover product wear or misuse.

In case of any manufacturing defect, the equipment

must be returned, postage paid, to the dealer where

it was purchased.

0021526-0618-V01

Specifications

- Net Weight 690 g (1.51lb)

- Dimensions 153 x 82 x 97 mm (6.02 x 3.23 x 3.82 in)

Complies with CE standards.

ESD protected.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere jbc Lötpistole Handbücher

Beliebte Lötpistole Handbücher anderer Marken

Bakon

Bakon 3200 Bedienungsanleitung

Proxxon

Proxxon Gaslotset MGS Bedienungsanleitung

HAKO

HAKO FX-8804 Bedienungsanleitung

SATA

SATA 02002A Bedienungsanleitung

Velleman

Velleman HRJA151 Bedienungsanleitung

Weller

Weller WSM 1 Bedienungsanleitung

Vishay Precision Group

Vishay Precision Group Micro-Measurements Mark V Montageanleitung

ersa

ersa i-CON 1V Bedienungsanleitung

Hakko Electronics

Hakko Electronics FX-100 Bedienungsanleitung

Weller

Weller WAD 101 Bedienungsanleitung

Weller

Weller WXD 2 Bedienungsanleitung

AlienTek

AlienTek T100 Bedienungsanleitung

Atten

Atten ATETOOL AT-689A Bedienungsanleitung

Surtek

Surtek 112554 Abmessungen und Installationsanleitung

Parkside

Parkside PLBS 30 A1 Bedienungsanleitung

BlackJack SolderWerks

BlackJack SolderWerks BK8000 Bedienungsanleitung

Weller

Weller WX1 Bedienungsanleitung

multicomp pro

multicomp pro MP740893 Bedienungsanleitung

jbc CS2R245-A Bedienungsanleitung

Beliebte Lötpistole Handbücher anderer Marken