Jbc NANE-B Bedienungsanleitung

Nano Soldering station

Ref. NANE-B

English

www.jbctools.com

2 3

Packing List

The following items should be included:

Control Unit .................. 1 unit

Ref. NAE-1B (120V)

NAE-2B (230V)

NAE-9B (100V)

Nano Handle ................. 2 unit

Ref. NT105-A

Manual ............................ 1 unit

Ref. 0016765

8 Type Cartridge

Case ................................ 1

unit

Ref. 0011568

Allen key ........................ 1 unit

Ref. 009848

Metal Brush .................. 1 unit

Ref. CL2466

Brass Wool .................... 1 unit

Ref. CL6210

Power Cord ................... 1 unit

Ref. 0009417

(100/120V)

0009401 (230V)

Nano Soldering station

Ref. NANE-B

Features

Process Screen:

2.8 Color TFT

Cartridge

extractor

and tip

aligner

Brass

wool

Metal

brush

Stand:

Intelligent Heat

Management

Cable

collector

Tool extension

cord (1m)

Ref. A1205

Pedal

Ref. P-005

Accessories not included:

Puts the tool into

hibernation mode

Power socket

Main switch

Equipotential

connector Pedal

connectors

USB-B

connector

RJ12

connector

for Robot

USB-A

connector

Cartridges

included

Ref. C105-101 x1

C105-103 x1

C105-105 x2

C105-107 x1

C105-112 x1

C105-113 x2

Tool Holder .................. 2 units

Ref. 0016606

Nano Handle

Ref. NT105-A

Nano Handle

Ref. NT105-A

ww w.jb cto ols .com

www.jbctools.com

ø 0,1

ø 0,3

ø 0,6

0,7

3,5

0,2 x 0,1

4 5

For Nano

Soldering Iron

Replace the tip cleaning system:

- Brass wool

- Inox wool

- Metal brush

For Nano

Tweezers

Tool Holder assembly Cable assembly

Changing the tip cleaning system

Changing cartridges

Save time and change cartridges safely without having to switch the station off.

All the cartridges shown are actual size. All measurements are in millimiters (mm).

Contact JBC if you need alternative shapes.

Compatible cartridges

The NANE-B station works with C105 cartridge range.

See the full range in www.jbctools.com and find the model that best suits your soldering needs.

Removing Inserting Aligning

Place the cartridge in the

slot as shown and pull the

handle to remove it.

Push the cartridge into the

handle to the mark*.

Use the holes to rotate

the cartridges for a proper

alignment.

*Important

It is essential to insert the cartridges as far as the mark

for a proper connection.

Special modelsRound ChiselRound bent Bevel

Mark

www.jbctools.com

6 7

Operation

The JBC Exclusive Heating System

Our revolutionary technology is able to recover tip temperature extremely quickly. It means the user

can work at a lower temperature and improve the quality of soldering. Tip temperature is further

reduced thanks to the Sleep and Hibernation modes which increase tip life by 5.

1. Work 2. Sleep

Tools Menu:

· Set temperature limits

· Select temperature levels

· Set Sleep temperature

· Set Sleep delay

(from 0 to 9 min or no Sleep)

· Set Hibernation delay

(from 0 to 60 min or no

hibernation)

Tools Menu: Tools Menu:

Tool in the stand

Actual Temp. 180ºC

Delay to hibernation: 29:30 Port

NT105

17:14

Sleep

17:14

Hibernation

Actual Temp. 25ºC

NT105

Port

350ºC

Port

Power

45%

17:14

Selected 350ºC

NT105

USB ﬂash drive is connected.

Station is controlled by a PC.

Station is controlled by a Robot.

Station software update.

Press INFO to start the process.

Warning.

Press INFO for failure description.

Error. Press INFO for failure description,

the type of error and how to proceed.

System notifications (Status Bar)Menu Options

Station

Information

Power

indicator

Tool

connected

Work Screen

Status Bar

The NANE-B offers an intuitive user interface which provides quick access to station parameters.

Change

port

Displayed

when

temperature

levels are

activated

Station Tools Counters

ResetGraphics

Press INFO for each parameter description.

3. Hibernation

When the tool is lifted from the

holder the tip will heat up to

the selected temperature.

When the tool is in the holder,

the temperature falls to

180ºC / 360ºF (preset sleep

temperature).

After longer periods of

inactivity (pre-set to 30 min.),

the power is cut off and the

tool cools down to room

temperature.

Long time in

the holder

350ºC

Port

Power

45%

Temp. Levels

NT105

250 350 380

17:14

www.jbctools.com

8 9

See other

port graphic

By pressing Graphics in the main MENU, temperature and power ﬁgures in real

time are displayed for each port. This helps you decide which tip to use to obtain

the best quality solder joint.

Process analysis

Graphics

Temperature

Power (%)

Export graphics

Insert a USB ﬂash drive into the USB-A

connector to save your soldering process

in csv format.

Soldering Net

Remotely manage and monitor as many stations as your PC can handle.

Functions:

- Set all the station parameters from your PC.

- Organize groups of stations and set all their parameters at the same time.

- Store specific configurations for later use.

- Analyze the soldering graphics of the stations on your PC and export them.

1. Download the JBC Manager software and the user manual from www.jbctools.com/manager.html

2. Connect the stations via USB-B connector and the PC will automatically detect them.

3. The notification will be displayed on the station.

any JBC

station

USB Hub

JBC

Manager

software

Port 1 - NT105

450

400

350

300

250

150

100

200

Power Temp

17:14

www.jbctools.com

- Replace a blown fuse as follows:

- Replace any defective or damaged pieces. Use original JBC spare parts only.

- Repairs should only be performed by a JBC authorized technical service.

10 11

Manage and monitor the station using a Robotic system.

Working with Robots

Update the station software

1. Download the JBC Updater software from

www.jbctools.com/software.html and save

it on a USB flash drive. Preferably one with

no other files.

2. Insert the USB ﬂash drive.

The icon is diplayed while updating.

JBC

Updater

Clean

periodically

1. Connect the tool to the port and connect your Robot system to the Robot connector (RJ12).

DB9-RJ12 Adapater available only if necessary (Ref: 0013772).

3. Enable the Robot option in the station settings and the notification will be displayed:

4. Set your Robot’s commands according to the Robot Communication Protocol, available on the

website www.jbctools.com/jbcsoftware-menu-115.html.

Control

Unit

Robot

RS-232

connection

Maintenance

1. Pull off the fuse holder and remove the

fuse. If necessary use a tool to lever it off.

2. Press the new fuse into the fuse holder

and replace it in the station.

- Use a damp cloth to keep the casing and

the tool clean. Alcohol can only be used to

clean the metal parts.

- Periodically check that the metal parts of

the tool and stand are clean so that the

station can detect the tool status.

Fuse holder

Fuse

holder

- Maintain tip surface clean and tinned prior

to storage in order to avoid tip oxidation.

Rusty and dirty surfaces reduce heat

transfer to the solder joint.

- Periodically check all cables and tubes.

Fuse

Before carrying out maintenance, always allow the equipment to cool.

- Clean the station screen with a glass cleaner

or a damp cloth.

www.jbctools.com

12 13

Exploded ViewSafety

It is imperative to follow safety guidelines to prevent electric

shock, injury, fire or explosion.

- Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire.

- The power cord must be plugged into approved bases. Be sure that it is properly grounded

before use. When unplugging it, hold the plug, not the wire.

- Do not work on electrically live parts.

- The tool should be placed in the stand when not in use in order to activate the sleep mode.

The soldering tip, the metal part of the tool and the stand may still be hot even when the station is

turned off. Handle with care.

- Do not leave the appliance unattended when it is on.

- Do not cover the ventilation grills. Heat can cause inflamable products to ignite.

- Use a “non residue” classified flux and avoid contact with skin or eyes to prevent irritation.

- Be careful with the fumes produced when soldering.

- Keep your workplace clean and tidy. Wear appropriate protective glasses and gloves when

working to avoid personal harm.

- Utmost care must be taken with liquid tin waste which can cause burns.

- This appliance can be used by children over the age of eight and also persons with reduced

physical, sensory or mental capabilities or lack of experience provided that they have been given

adequate supervision or instruction concerning use of the appliance and understand the hazards

involved. Children must not play with the appliance.

- Maintenance must not be carried out by children unless supervised.

www.jbctools.com

14 15

NANE-1B 120V 50/60Hz. Input fuse: 0.5A. Output: 8.5V

NANE-2B 230V 50/60Hz. Input fuse: 0.2A. Output: 8.5V

NANE-9B 100V 50/60Hz. Input fuse: 0.5A. Output: 8.5V

- Weight: 1.8 Kg (4.0 lb)

- Dimensions: 170 x 90 x 135mm

- Output Peak Power: 14W per tool

- Temperature Range: 90-450°C (190-840ºF) ±5%

- Idle Temp. Stability (still air): ±3 ºC (±5.5 ºF)

- Tip to ground resistance: <2 ohms

- Ambient Operating Temperature: 10-40 ºC (50-104 ºF)

- USB-A / USB-B / Pedal connectors

- RJ12 connector for Robot

Complies with CE standards

ESD protected housing “skin effect”

Specifications

0016765-0915

Warranty

JBC’s 2 year warranty covers this equipment

against all manufacturing defects, including the

replacement of defective parts and labour.

Warranty does not cover product wear due to use

or mis-use.

In order for the warranty to be valid, equipment

must be returned, postage paid, to the dealer

where it was purchased.

This product should not be thrown in the garbage.

In accordance with the European directive 2002/96/EC, electronic equipment at the end of their life

must be collected and returned to an authorized recycling facility.

www.jbctools.com

Andere Handbücher für NANE-B

Inhaltsverzeichnis

Beliebte Lötpistole Handbücher anderer Marken

Bakon

Bakon 3200 Bedienungsanleitung

Proxxon

Proxxon Gaslotset MGS Bedienungsanleitung

HAKO

HAKO FX-8804 Bedienungsanleitung

SATA

SATA 02002A Bedienungsanleitung

Velleman

Velleman HRJA151 Bedienungsanleitung

Weller

Weller WSM 1 Bedienungsanleitung

Vishay Precision Group

Vishay Precision Group Micro-Measurements Mark V Montageanleitung

ersa

ersa i-CON 1V Bedienungsanleitung

Hakko Electronics

Hakko Electronics FX-100 Bedienungsanleitung

Weller

Weller WAD 101 Bedienungsanleitung

Weller

Weller WXD 2 Bedienungsanleitung

AlienTek

AlienTek T100 Bedienungsanleitung

Atten

Atten ATETOOL AT-689A Bedienungsanleitung

Surtek

Surtek 112554 Abmessungen und Installationsanleitung

Parkside

Parkside PLBS 30 A1 Bedienungsanleitung

BlackJack SolderWerks

BlackJack SolderWerks BK8000 Bedienungsanleitung

Weller

Weller WX1 Bedienungsanleitung

multicomp pro

multicomp pro MP740893 Bedienungsanleitung

jbc NANE-B Bedienungsanleitung

Beliebte Lötpistole Handbücher anderer Marken