Jbc SF Bedienungsanleitung

Automatic Solder Feeder Station

INSTRUCTION MANUAL

Manual ...............................1 unit

Ref. 0028008

Allen key Ø 1,5 ................1 unit

Ref. 0741610

SF Control Unit ............. 1 unit

Allen key Ø 2,5 ................1 unit

R ef. 0 012574

Power cable .................... 1 unit

Ref. 0023715 (100V/120V)

0023714 (230V)

Spanner ............................ 1 unit

Ref. 00176 31

Guide Set ....................... 1 unit

Ref. GSF10V-B

already assembled

Automatic Solder Feed

Handle ............................. 1 unit

Ref. SF280-A

Packing List

The following items are included:

This manual corresponds to the following references:

SF-110VB (110-120V) with Guide Set ø1mm

SF-210VB (230V) with Guide Set ø1mm

Reel Support .................. 1 unit

Ref. 0019301 (x1) - Support

0018033 (x1) - Axis

0003412 (x2) - Lock Ring

0014427 (x2) - Knob

Lock Ring

Knob

Support

Axis

Power Socket

Fuse

RJ12 Connection for

Robot System

RJ12 Connection for Station

USB-B Connector

(in front, on the side)

Solder Wire

Inlet

Features and Connections

Automatic Solder

Feed Handle

Ref. SF280-A

SF Control Unit

Main Switch

Control Screen

40 mm

50 mm

60 mm

80 mm

100 mm

130 mm 130 mm

para manuales - color gris

200 mm

300 mm

Main MenuMain Menu

5 Tin Reload Process

6 Counters

7 Software Version

1 Reset settings

Station settings

Tool settings

4 Programs Settings

ExitExit

ckward Forward

Reload ProcessReload Process

Press enter when finished

Tool Assembly

Connect the tool to the control unit following

this steps:

1. Insert and push the guide nozzle until the end

and tighten the screw.

2. Connect the jack.

Solder Wire Loading

1. Put the solder reel into its support.

2. Introduce the solder wire into the inlet nozzle

until it reaches the wheels.

3. Use the Tin Reload Process in Main Menu by

pressing the tool button

The Relaod Procees screen opens.

4. Make sure the wire passes through the Inter-

mediate Nozzle and enters into the Guide Tube.

Inlet

Nozzle

Insert to the end

Intermediate

Nozzle

To Guide Tube

Changing Guide Sets

1. Assemble the counter wheel (1).

2. Insert the intermediate nozzle (2) until its collar

rests against the housing and tighten the screw.

3. Assemble the inlet nozzle (3).

4. Assemble the guide wheel (4) and tighten the

screw.

5. Assemble the blade first, then mount the

blade clamp (5) onto the same axis and tighten

the screw. Caution: handle the blade carefully

to avoid injury.

Assembly with Solder Wire Perforation Assembly without Solder Wire Perforation

Changing Wheels and Blade

For this operation, disconnect the device from the mains. Disconnect the tool from the control unit

and open its cover.

First disassemble the guide tube (6), the nozzles (2)+(3), then the Wheels, Blade and Clamp (4)+(5).

Disassemble the Counter Wheel (1). Use the allen key and the spanner, provided with SF.

1. Assemble the counter wheel (1).

2. Insert the intermediate nozzle (2) until its collar

rests against the housing and tighten the screw.

3. Assemble the inlet nozzle (3).

4. Assemble the traction wheel (4) onto the axis

and tighten the screw.

5. Assemble the support wheel (5) and tighten

the screw.

Blade

Blade Clamp

Inlet

Nozzle

Guide

Wheel

Intermediate

Nozzle

Traction

Wheel

Support

Wheel

Intermediate

Nozzle

Inlet

Nozzle

Counter

Wheel

Counter

Wheel

40 mm

50 mm

60 mm

80 mm

100 mm

130 mm 130 mm

para manuales - color gris

200 mm

300 mm

AP250

AL250

SF280

SF250

AP250

AL250

SF280

SF250

SF with no Guide Tube assembled

Replacing the Guide Tube

Once the tool is disconnected from the control unit follow the instructions below:

1. Disassemble the outlet nozzle (1) from the guide tube.

2. Open the guide clamp (2), take off the guide tube (3) and insert the new one.

Note: The guide tube length can be easily adjusted (4) when the guide clamp knob (2) is open.

4. Once the guide tube length is adjusted close the guide clamp knob (2).

5. Assemble the outlet nozzle (1) onto the guide tube tip.

Guide Clamp

Knob

Guide

Tube

Outlet

Nozzle

SF with Guide Tube assembled

Guide

Tube

BackBack

Setting Program 35Setting Program 35

Continuous Mode Discontinuous Mode Program 35

Speed Length Length

STEP1 STEP2

Speed Speed

Supplied: 2.0mm 0:05 40% 40%

mm/s mm mm

mm/s mm/s

40.0 1.5 1.5

20.0 20.0

STEP3

Length Speed

mm mm/s

5.0 20.0

STEP 1

STEP 2

STEP 3

BackBack

Edit ProgramEdit Program

mm/s

STEP 1 STEP 2 STEP 3

5.0 3.0 1.5

20.0 24.5 20.0

FACTORY 1 1Program35

FACTORY1

2Program22

LAB2

3Program35

FACTORY1

Program ConcatenationProgram Concatenation

BackBack

Work Screen

Control Process

Choose between continuous, discontinuous and program mode:

Program Mode

With the SF you can define up to 35 dynamic programs. In each one you can configure up to 3

steps with different lenght wire and dispensing speed.

Execute them sequentially and cyclically with the ‘Edit Concatenation List’ option.

Station troubleshooting available on the product page at www.jbctools.com

Troubleshooting

40 mm

50 mm

60 mm

80 mm

100 mm

130 mm 130 mm

para manuales - color gris

200 mm

300 mm

Main MenuMain Menu

5 Tin Reload Process

6 Counters

7 Software Version

1 Reset settings

Station settings

Tool settings

4 Programs Settings

ExitExit

1 Length units*

Beep Off

3 PIN On

4 Change PIN

1 Mode

Discontinuous

Backward Off

Tool SettingsTool Settings

Station SettingsStation Settings

BackBack

1 Edit Program

Delete Program

Edit Concatenation List

Program SettingsProgram Settings

ckward Forward

Reload ProcessReload Process

1 Plugged hours

7605

Working hours 350

3 Supplied mm 560

4 Work Cycles 75830

CountersCounters

BackBack

5 Reset partial counters

Press Enter to toggle*

Press enter when finished

BackBack

5 Station Locket

Off

Robot Mode Off

Menu Screen

Default PIN: 0105

Control Process

*switch total and partial

counters

*switch mm and inches

Solder Wire Ø Ref. with Solder

Wire Perforation Solder Wire Ø Ref. without Solder

Wire Perforation

- - 0.4 mm / 0.016 in GSF04D-B

- - 0.5 mm / 0.020 in GSF05D-B

- - 0.6 mm / 0.025 in GSF06D-B

0.8 mm / 0.032 in GSF08V-B 0.7 - 0.8 mm / 0.028 - 0.032 in GSF08D-B

1.0 mm / 0.040 in GSF10V-B 0.9 - 1.0 mm / 0.035 - 0.040 in GSF10D-B

1.2 mm / 0.047 in GSF12V-B 1.1 - 1.2 mm / 0.043 - 0.047 in GSF12D-B

1.5 mm / 0.059 in GSF15V-B 1.3 - 1.5 mm / 0.051 - 0.059 in GSF15D-B

1.6 mm / 0.063 in GSF16V-B 1.6 mm / 0.063 in GSF16D-B

Accesories

Tool Stand

Stand for SF280 Solder Feed Handle

Ref. SF-SE

It prevents SF280 Solder Feed Handle from

rolling away while working.

Guide Sets

Different guide sets are available depending on

the diameter of the used solder wire.

40 mm

50 mm

60 mm

80 mm

100 mm

130 mm 130 mm

para manuales - color gris

200 mm

300 mm

Safety

- Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire.

- The power cord must be plugged into approved bases. Be sure that it is properly grounded before

use. When unplugging it, hold the plug, not the wire.

- Do not work on electrically live parts.

- The tool should be placed in the stand when not in use in order to activate the sleep mode. The

soldering tip or nozzle, the metal part of the tool and the stand may still be hot even when the station

is turned off. Handle with care, including when adjusting the stand position.

- Do not leave the appliance unattended when it is on.

- Do not cover the ventilation grills. Heat can cause inflamable products to ignite.

- Avoid flux coming into contact with skin or eyes to prevent irritation.

- Be careful with the fumes produced when soldering.

- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when working

to avoid personal harm.

- Utmost care must be taken with liquid tin waste which can cause burns.

- This appliance can be used by children over the age of eight and also persons with reduced physical,

sensory or mental capabilities or lack of experience provided that they have been given adequate

supervision or instruction concerning use of the appliance and understand the hazards involved.

Children must not play with the appliance.

- Maintenance must not be carried out by children unless supervised.

It is imperative to follow safety guidelines to prevent electric

shock, injury, fire or explosion.

Before carrying out maintenance, always allow

the equipment to cool down.

- Clean the station screen with a glass cleaner

or a damp cloth.

- Use a damp cloth to clean the casing and the

tool. Alcohol can only be used to clean the

metal parts.

- Periodically check all cables and tubes.

- Replace a blown fuse as follows:

Clean periodically

Maintenance

Fuse

Holder

Fuse

Holder

Fuse

- Replace any defective or damaged parts. Use original JBC spare parts only.

- Repairs should only be performed by a JBC authorized technical service.

1. Pull off the fuse holder out and remove the

worn fuse. If necessary use a tool to lever it off.

2. Insert the new fuse into the fuse holder and

assemble it to the station.

Andere Handbücher für SF

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Lötpistole Handbücher anderer Marken

Bakon

Bakon 3200 Bedienungsanleitung

Proxxon

Proxxon Gaslotset MGS Bedienungsanleitung

HAKO

HAKO FX-8804 Bedienungsanleitung

SATA

SATA 02002A Bedienungsanleitung

Velleman

Velleman HRJA151 Bedienungsanleitung

Weller

Weller WSM 1 Bedienungsanleitung

Vishay Precision Group

Vishay Precision Group Micro-Measurements Mark V Montageanleitung

ersa

ersa i-CON 1V Bedienungsanleitung

Hakko Electronics

Hakko Electronics FX-100 Bedienungsanleitung

Weller

Weller WAD 101 Bedienungsanleitung

Weller

Weller WXD 2 Bedienungsanleitung

AlienTek

AlienTek T100 Bedienungsanleitung

Atten

Atten ATETOOL AT-689A Bedienungsanleitung

Surtek

Surtek 112554 Abmessungen und Installationsanleitung

Parkside

Parkside PLBS 30 A1 Bedienungsanleitung

BlackJack SolderWerks

BlackJack SolderWerks BK8000 Bedienungsanleitung

Weller

Weller WX1 Bedienungsanleitung

multicomp pro

multicomp pro MP740893 Bedienungsanleitung

jbc SF Bedienungsanleitung

Beliebte Lötpistole Handbücher anderer Marken