JL Audio Stealthbox SB-H-CRV2/10TW3 Bedienungsanleitung

INSTALLATION GUIDE

for the

SB-H-CRV2/10TW3

SKU# 94584, 94585, 94586

2012 & Up Honda CRV

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.

With proper installation, your new vehicle-specific enclosed subwoofer system

will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your

authorized JL Audio dealer. The installation professionals employed by your

dealer have the necessary tools and experience to disassemble and reassemble

your vehicle properly. If you prefer to perform your own installation, please read

this installation guide completely before beginning the process.

If you choose to perform the installation yourself, it is absolutely vital

that the Stealthbox®be properly mounted to the vehicle according to

these instructions. Failure to mount the enclosure properly presents two

problems:

1) The sub-bass performance will suffer due to the movement of the

enclosure caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a

collision or sudden deceleration.

INSTALLATION

D IFF I CU LT Y:

ESTIMATED TIME:

2 HOURS

Enclosure Type: Sealed

Driver Type: 10TW3-D4

Nominal Impedance: 2 ohms

Continuous Power Handling: 400 watts (RMS method)

Continued on Next Page

OUT

SB-H-CRV2/10TW3 INSTR_SKU# 011371

INCLUDED HARDWARE

Continued on Next Page

Page 2 • JL Audio, Inc., 2013

SB-H-CRV2/10TW3 INSTR_SKU# 011371

POWER RECOMMENDATION

JL Audio recommends high quality ampliers such as the JL Audio XD300/1. The diagram below shows the recommended crossover settings for the XD300/1. For a detailed description of the am-

plier settings, consult the owner’s manual for the amplier. If another amplier is being used, please reference this illustration and use similar settings on that amplier.

CONNECTIONS

Using quality power, signal, and speaker wire is essential in ensuring the performance of your Stealthbox®. JL Audio recommends using a 4 AWG power kit such as the XD-PCS4-1B for your Stealth-

box® amplier. Other kits are available should you be using more than one amplier. Signal wire such as the JL Audio Premium Audio Interconnect Cables should be used to provide signal for both

channels of the amplier. JL Audio reccomends using 12AWG speaker wire for subwoofers such as our XC-BCS12-25.

Continued on Next Page

Page 3 • JL Audio, Inc., 2013

SB-H-CRV2/10TW3 INSTR_SKU# 011371

Page 4 • JL Audio, Inc., 2013

SB-H-CRV2/10TW3 INSTR_SKU# 011371

Continued on Next Page

STEP 8

Fold the rear seats forward. Carefully unclip

and remove the passenger side seat bracket

cover panel.

STEP 7

Remove the plastic snap at the base of the pas-

senger side panel near the jack.

STEP 6

Unbolt and remove the metal tie down hook at

the rear of the passenger side panel.

STEP 5

Unclip the screw cover panel behind the

passenger side rear seat release handle, and

remove the two screws. Remove the cargo net

hook.

STEP 4

Carefully unclip and remove the rear cargo sill

panel.

STEP 3

Remove the cargo floor panel.

STEP 2

Remove the subwoofer from the Stealthbox®,

and place the enclosure into position inside the

vehicle. Mark the mounting hole location on

the plastic side panel, and remove the enclo-

sure.

STEP 1

Empty out the cargo area of the vehicle.

Page 5 • JL Audio, Inc., 2013

SB-H-CRV2/10TW3 INSTR_SKU# 011371

Continued on Next Page

STEP 16

Pictured is the passenger side of the vehicle

with the side panel removed.

STEP 15

With the passenger side panel unclipped,

remove the seat release handle and cable and

set it aside. Remove the side panel from the

vehicle.

STEP 14

Remove the edge of the weatherstripping near

the rear door latch, and remove the passenger

side panel.

STEP 13

Continue toward the front of the vehicle, care-

fully unclipping the passenger side panel.

STEP 12

Starting from the rear of the vehicle, carefully

unclip the passenger side panel.

ST E P 11

Pictured is the rear floor with the sill panel

removed.

STEP 10

Open the passenger side rear door. Carefully

unclip and remove the lower door sill panel.

Remove the screw under the panel.

STEP 9

Pictured is the passenger side panel with the

seat bracket cover panel removed.

Page 6 • JL Audio, Inc., 2013

STEP 24

Route speaker cable as necessary and through

the hole in the side panel drilled in Step 19.

STEP 23

Slide the 3/8 - 16 U-Nut over the Bracket and

align it with the center hole. Thread the 3/8 -

16 x 3” Set Screw into the U-Nut, and slide the

1” OD x 3/8” ID x 1” Spacer over it as shown.

STEP 22

Slide a 1/4” Flat Washer over each 1/4 - 20 x 1”

Hex Bolt, and slide an assembly through each

hole indicated in Step 20. From behind the

factory metal bracing, slide the Bracket over

two 1/4 - 20 x 1” Hex Bolts, with the center hole

toward the bottom. Secure the Bracket using a

pair of 1/4” Lock Washers, 1/4” Flat Washers and

1/4 - 20 Hex Nuts.

STEP 21

Locate the two holes indicated.

SB-H-CRV2/10TW3 INSTR_SKU# 011371

Continued on Next Page

STEP 20

Pictured is the included hardware. Reference

this picture and the illustration on Page 2 for

the assembly in Steps 21-22.

STEP 19

Using a 3/8” drill bit, drill a hole at the top

of the small raised section on the back of

the panel as shown. This hole will be for the

speaker cable.

STEP 18

Using a 1/2” drill bit, drill a hole on the mark

made in Step 2. This hole will be for the

mounting hardware. On the backside of the

panel, cut away the plastic rib just above the

hole as shown.

STEP 17

Two holes will need to be drilled into the side

panel. Pictured are the locations for reference

in Steps 18-19.

Page 7 • JL Audio, Inc., 2013

MID/HIGH FREQUENCY DRIVER FITMENT

A variety of JL Audio coaxial and component systems will t in the factory speaker locations of you vehicle.

Front Speaker Size / Location: 6-1/2”- Front Doors

Fits JL Audio Models: TR650-CXi, TR650-CSi, C2-650x, C2-650,

C3-650, C5-650x, C5-650, & ZR650-CSi

Rear Speaker Size / Location: 6-1/2”- Rear Door

Fits JL Audio Models: TR650-CXi, TR650-CSi, C2-650x, C2-650,

C3-650, C5-650x, C5-650, & ZR650-CSi

All specifications are subject to change without notice.“JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered trademarks of JL Audio, Inc.,. “Ahead of the Curve”

and its respective logo is a trademark of JL Audio, Inc.,.

#6,625,292 #D472,891 #D480,709 Other U.S. & Foreign patents pending. For more detailed information please visit us online at www.jlaudio.com.

(954) 443-1100

www.jlaudio.com

JLA-SKU# 94584-86 • ver. 11.22.2013 • 10369 NORTH COMMERCE PARKWAY • MIRAMAR, FLORIDA • 33025 • USA

STEP 27

Slide a 3/8 x 1-1/4” Fender Washer, a 3/8” Lock

Washer, and a 3/8 - 16 Nut over the 3/8 - 16 x 3”

Set Screw and fully tighten.

Be sure the 3/8 -16 x 3” Set Screw does not

protrude past the back of the 3/8” Nut more

than 1/4”.

STEP 26

Connect the speaker cable to the terminal cup

on the back of the enclosure. Place the enclo-

sure back into position, allowing the 3/8 - 16

x 3” Set Screw to pass through the hole in the

back of the enclosure.

STEP 25

Reinstall the passenger side panel, allowing the

3/8 -16 x 3” Set Screw to pass through the hole

made in Step 18.

CONGRATULATIONS!

You have completed the installation for this model! Enjoy your new Stealthbox®!

How we play.™

SB-H-CRV2/10TW3 INSTR_SKU# 011371

STEP 27

Reinstall the subwoofer.

Andere JL Audio Subwoofer Handbücher

JL Audio

JL Audio Stealthbox SB-SC-TC/10W3v3 Bedienungsanleitung

JL Audio

JL Audio 10TW3 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-VW-GTI/10TW3 Bedienungsanleitung

JL Audio

JL Audio SB-N-ALT/10W3v3 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-GM-C6CONV/8W3v3 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-N-350/10W3v2 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-T-TUNDC/8W7 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-GM-SLVCNSL/10W3-D6 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-T-TCMAX/10TW3 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-T-4RNR2/10W3v2 Bedienungsanleitung

JL Audio

JL Audio 15W3v2-D2 Bedienungsanleitung

JL Audio

JL Audio W7AE Bedienungsanleitung

JL Audio

JL Audio ACP1 08LG-W3v3 Bedienungsanleitung

JL Audio

JL Audio Fathom IWSv2-SYS-113 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-GM-EQNX/10W1v3 Bedienungsanleitung

JL Audio

JL Audio 94350 Bedienungsanleitung

JL Audio

JL Audio 8WI-4 Bedienungsanleitung

JL Audio

JL Audio 8W3 Bedienungsanleitung

JL Audio

JL Audio e110 Bedienungsanleitung

JL Audio

JL Audio 10W0v3-4 Bedienungsanleitung

JL Audio

JL Audio 12W6v3-D4 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-GM-CAM6G/12TW3 Bedienungsanleitung

JL Audio

JL Audio 10W3 Bedienungsanleitung

JL Audio

JL Audio 10W6v2-D4 Bedienungsanleitung

Beliebte Subwoofer Handbücher anderer Marken

Sony

Sony XS-AW8 Bedienungsanleitung

Sony

Sony XS-L836 Bedienungsanleitung

B&C Speakers

B&C Speakers 15 HPL 76W Bedienungsanleitung

Velodyne

Velodyne DD-18+ Bedienungsanleitung

Sonance

Sonance Cinema Series SUB 10-150 Bedienungsanleitung

Hifonics

Hifonics HW-12 Kurzanleitung

Magnat Audio

Magnat Audio ADR 130 BP Bedienungsanleitung

Blitz

Blitz BZP106 Bedienungsanleitung

Technics

Technics SB-AS500 Bedienungsanleitung

Lyngdorf

Lyngdorf BW-2 Bedienungsanleitung

Lyngdorf

Lyngdorf BW-3 Bedienungsanleitung

Pyle Pro

Pyle Pro PYLE PRO PDW15125 Bedienungsanleitung

REL Acoustics

REL Acoustics Q Series Bedienungsanleitung

L-Acoustics

L-Acoustics KIVA SB15M Kurzanleitung

Pioneer

Pioneer Elite S-W1EX Bedienungsanleitung

B&C Speakers

B&C Speakers Woofer 12 HPL 76 Bedienungsanleitung

KEF

KEF KUBE 200 Bedienungsanleitung

Yamaha

Yamaha SW500 Bedienungsanleitung