JL Audio Stealthbox SB-KW-TRX4/10TW3 Bedienungsanleitung

SB-KW-TRX4/10TW3 INSTR_SKU# 011451

Enclosure Type: Sealed

Driver Type: 10TW3-D4

Nominal Impedance: 2 ohms

Continuous Power Handling: 400 watts (RMS method)

INSTALLATION GUIDE

for the

SB-KW-TRX4/10TW3

SKU# 94624

2015 & Up Kawasaki Teryx 4

Continued on Next Page

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.

With proper installation, your new vehicle-specific enclosed subwoofer system

will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your

authorized JL Audio dealer. The installation professionals employed by your

dealer have the necessary tools and experience to disassemble and reassemble

your vehicle properly. If you prefer to perform your own installation, please read

this installation guide completely before beginning the process.

If you choose to perform the installation yourself, it is absolutely

vital that the Stealthbox®be properly mounted to the vehicle

according to these instructions. Failure to mount the enclosure

properly presents two problems:

1) The sub-bass performance will suffer due to the movement of the

enclosure caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a

collision or sudden deceleration.

INSTALLATION

D IFFICU LT Y:

ESTIMATED TIME:

1 HOUR

OUT

INCLUDED HARDWARE

Continued on Next Page

Page 2 • JL Audio, Inc., 2016

SB-KW-TRX4/10TW3 INSTR_SKU# 011451

Note: For optimum performance, JL Audio recommends applying the included Foam Strips (or sound damping material) to surrounding plastic panels to reduce unwanted vibrations.

BOM ID Qty SKU Description

1 1 153693 Bracket

2 2 153737 3/8” Stainless Steel Flat Washer

3 2 153731 3/8” Stainless Steel Serrated Spring Lock Washer

4 2 153730 3/8 - 16 x 1-1/4” Stainless Steel Serrated Flange Bolt

- 2 151345 Wax Squares (not shown)

- 2 150249 Foam Strips (not shown)

POWER RECOMMENDATION

JL Audio recommends high quality ampliers such as the JL Audio MX300/1. The diagram below shows the recommended crossover settings for the MX300/1. For a detailed description of the

amplier settings, consult the owner’s manual for the amplier. If another amplier is being used, please reference this illustration and use similar settings on that amplier.

CONNECTIONS

Using quality power, signal, and speaker wire is essential in ensuring the performance of your Stealthbox®. JL Audio recommends using an 8 AWG power kit such as the XD-PCS8-1B for your

Stealthbox® amplier. Other kits are available should you be using more than one amplier. Signal wire such as the JL Audio Premium Audio Interconnect Cables should be used to provide signal for

both channels of the amplier. JL Audio recommends using 12AWG speaker wire for subwoofers such as the XC-BCS12-25.

Continued on Next Page

Page 3 • JL Audio, Inc., 2016

SB-KW-TRX4/10TW3 INSTR_SKU# 011451

Page 4 • JL Audio, Inc., 2016 Continued on Next Page

STEP 6

From the backside of the rear panel, position

the Bracket around the frame. Slide a 3/8”

Serrated Spring Lock Washer and a 3/8” Flat

Washer over each of the 3/8 - 16 x 1” Serrated

Flange Bolts, thread the assemblies through

the holes in the Bracket and rear panel,

into the threaded inserts on the back of the

Stealthbox®, and fully tighten.

STEP 5

Connect speaker cable to the barrier strip on

the enclosure. Put the Stealthbox® back into

position.

STEP 4

Remove the Stealthbox® once more, leaving

the Wax Squares in place. Using a 3/8” drill bit,

drill a hole through the rear panel on each of

the impressions.

Before drilling, always make sure that you

are not going to be drilling into any gas

lines, brake lines, tires, transmission lines,

electrical wiring, exhaust systems or any

other critical system.

STEP 3

Temporarily place the Stealthbox® on the floor

behind the driver’s seat to determine where

the 3/8 - 16 x 1” Serrated Flange Bolts meet the

rear panel.

Remove the Stealthbox®, and position the Wax

Squares on the panel at the bolt locations. Put

the Stealthbox® back in position, pressing

firmly against the enclosure to leave bolt

impressions on the Wax Squares.

STEP 2

Thread the supplied 3/8 - 16 x 1” Serrated

Flange Bolts into the two threaded inserts on

the back of the Stealthbox®, and hand tighten.

STEP 1

Attach Foam Strips from one of the

included sheets to the rear and bottom of the

Stealthbox®, evenly spaced, as shown.

SB-KW-TRX4/10TW3 INSTR_SKU# 011451

STEP 7

Route speaker cable as necessary.

Note: For optimum performance, we

recommend applying Foam Strips from the

remaining sheet (or sound damping

material) to surrounding plastic panels to

reduce unwanted vibrations.

Page 5 • JL Audio, Inc., 2016

CONGRATULATIONS!

You have completed the installation for this model! Enjoy your new Stealthbox®!

SB-KW-TRX4/10TW3 INSTR_SKU# 011451

MID/HIGH FREQUENCY DRIVER FITMENT

VeX™ Enclosed Speaker Systems are ideal for powersports and o-road vehicle applications. Each

weatherproof pod can be mounted to a roll cage precisely aimed for optimum sound. Mounting

xtures are available to t a variety of roll cage diameters.

All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, and “Stealthbox” and the Stealthbox logo are registered trademarks of JL Audio, Inc.,. “Ahead of the

Curve”, its respective logo, and “How we play” are trademarks of JL Audio, Inc.,.

#6,625,292 #D472,891 #D480,709 Other U.S. & Foreign patents pending. For more detailed information please visit us online at www.jlaudio.com.

(954) 443-1100

www.jlaudio.com

JLA-SKU# 011451 • ver. 05.04.2016 • 10369 NORTH COMMERCE PARKWAY • MIRAMAR, FLORIDA • 33025 • USA

Andere JL Audio Subwoofer Handbücher

JL Audio

JL Audio Stealthbox SB-GM-VET/10W3 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-GM-CAM6G/12TW3 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-GM-TRKDBL/10W Bedienungsanleitung

JL Audio

JL Audio MicroSub+ Bedienungsanleitung

JL Audio

JL Audio SB-H-DELSOL/8W3v3 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-J-LBRTY/12W3 Bedienungsanleitung

JL Audio

JL Audio Stealthbox 5 Series Bedienungsanleitung

JL Audio

JL Audio 15W3 18W3 Bedienungsanleitung

JL Audio

JL Audio Stealtbox SB-K-SL-12W0v2 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-N-PTHFNDR/10W Bedienungsanleitung

JL Audio

JL Audio 94350 Bedienungsanleitung

JL Audio

JL Audio 12W3v3-2 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-H-CRV2/10TW3 Bedienungsanleitung

JL Audio

JL Audio 13W1v2-4 Bedienungsanleitung

JL Audio

JL Audio 6W3v3-4 Bedienungsanleitung

JL Audio

JL Audio 12W1v3-2 Bedienungsanleitung

JL Audio

JL Audio 12W0v2-4 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-T-TUNDCMAX/13TW5v2 Bedienungsanleitung

JL Audio

JL Audio Dominion d108 Bedienungsanleitung

JL Audio

JL Audio W7AE Bedienungsanleitung

JL Audio

JL Audio 12W3v3-2 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-T-TUNDC/8W7 Bedienungsanleitung

JL Audio

JL Audio M10IB5-4 Bedienungsanleitung

JL Audio

JL Audio 8W3 Bedienungsanleitung

Beliebte Subwoofer Handbücher anderer Marken

Sony

Sony XS-AW8 Bedienungsanleitung

Sony

Sony XS-L836 Bedienungsanleitung

B&C Speakers

B&C Speakers 15 HPL 76W Bedienungsanleitung

Velodyne

Velodyne DD-18+ Bedienungsanleitung

Sonance

Sonance Cinema Series SUB 10-150 Bedienungsanleitung

Hifonics

Hifonics HW-12 Kurzanleitung

Magnat Audio

Magnat Audio ADR 130 BP Bedienungsanleitung

Blitz

Blitz BZP106 Bedienungsanleitung

Technics

Technics SB-AS500 Bedienungsanleitung

Lyngdorf

Lyngdorf BW-2 Bedienungsanleitung

Lyngdorf

Lyngdorf BW-3 Bedienungsanleitung

Pyle Pro

Pyle Pro PYLE PRO PDW15125 Bedienungsanleitung

REL Acoustics

REL Acoustics Q Series Bedienungsanleitung

L-Acoustics

L-Acoustics KIVA SB15M Kurzanleitung

Pioneer

Pioneer Elite S-W1EX Bedienungsanleitung

B&C Speakers

B&C Speakers Woofer 12 HPL 76 Bedienungsanleitung

KEF

KEF KUBE 200 Bedienungsanleitung

Yamaha

Yamaha SW500 Bedienungsanleitung