Joerns Oxford Bedienerhandbuch

User Instruction Manual

Oxford®Switch

To avoid injury, read user manual prior to use.

Oxford®

Switch

English

Contents

1. Introduction........................................................................................................................ 3

2. Assembly & Commissioning Instructions .......................................................................... 4

3. Safety Precautions ............................................................................................................5

4. Operating Instructions ....................................................................................................... 7

5. Maintenance Schedule & Daily Check List ..................................................................... 13

6. Technical Specifications.................................................................................................. 15

7. Warranty .......................................................................................................................... 16

Oxford®

Switch

English

1. Introduction

The Oxford Switch is a sit-to-stand and transfer device for moving a person over short distances.

This might be bed to chair, chair to wheelchair or to and from a toilet/commode, for example. As

a secondary application, the Switch can also be used to help reposition a patient who may have

slouched in their chair. The Switch has a very compact footprint, enabling effective use, even

in confined spaces. It can also be quickly disassembled into two separate components to aid

transportation and storage.

The packing consists of a strong, purpose built carton that is used for both export and domestic

markets to ensure the safe arrival of the product.

To properly maintain your product please refer to the maintenance schedule included in this

document. If you are at all unsure what your country’s servicing requirements are, please check

with your authorised distributor and/or a local government agency.

The CE mark: The Oxford Switch carries the CE mark and complies with the following EC

directives:

• Medical Device Directive MDR 2017/745

Statement of Intended Use

The intended use of the Oxford Switch is to help an individual with limited mobility to stand

(with assistance) from a seated position and to enable their transfer from one resting surface

to another, such as a bed to a chair. It is designed for indoor use and for transfers over short

distances only.

Expected Service Life

Oxford Professional products are designed and tested for a minimum service life of ten (10)

years, subject to the use and maintenance procedures stated in this manual. Use, other than in

accordance with these instructions, may compromise service life.

Oxford®

Switch

English

2. Assembly & Commissioning

Assembly

Place the carton in a clear working area and open carefully. The carton contains:

• Base • Frame

• Frame retaining knobs • Spare/replacement brake decals

• User Guide (This booklet)

1. Correctly locate the frame into the mounting supports on the base,

ensuring the knee pad height-adjustment quick release pins

are on the same side as the brake pedals.

2. Insert the two frame securing knobs and tighten by hand,

ensuring they are positively engaged and secure.

3. Ensure both knee pads are facing the patient side of the

device, i.e. towards the heal of the footprint decals.

Storage & Transportation

The base and frame can be separated for easier storage and transportation. The base can be

carried using the integrated handle.

Base

Knee Pads

Frame

Frame retaining knobs

Oxford®

Switch

English

3. Safety Precautions

Please read and follow the safety precautions listed below. The operation and use

of Oxford products is simple and straightforward. Following these few basic safety

precautions will make transfer operations easy and trouble free.

WARNING

• ALWAYS carry out a full and thorough risk assessment prior to using the Switch.

• In order to use the Switch safely, the patient MUST display the following abilities:

• Support their own body weight while standing

• Maintain balance for an extended period while standing (with support)

• A firm grip in order to grasp the frame handles for support and stability

• Ability to understand and carry out instruction

• The Switch is intended for short transfers on flat/even floors.

• ALWAYS plan your transfer operations before commencing.

• ALWAYS carry out the DAILY CHECK LIST before using this product.

• ALWAYS familiarise yourself with the operating devices and safety features of this

product before use.

• The caregiver(s) must ALWAYS apply supportive and counter force in a safe manner

when the user is standing up, sitting down and during transfer. Failure to do this may

result in inadvertent tipping and consequential injury to the patient and/or caregiver.

• DO NOT use a sling or belt unless it is recommended for use with the device.

• ALWAYS check the sling/belt is suitable for the particular patient and is of the correct

size and capacity.

• NEVER use a sling/belt which is frayed or damaged.

• ALWAYS fit a sling/belt according to the user instructions provided.

• ALWAYS check the safe working load of the product(s) is/are suitable for the weight of

the patient.

• ALWAYS carry out transfers according to the instructions in the user manual.

Oxford®

Switch

English

• NEVER attempt to bypass a safety feature because it seems easier to operate

the product.

• NEVER force an operating or safety device. All devices are easy to use and do not

require excessive force to operate. If a device is not working easily there will be a

reason. Forcing will only strain or damage the product and may compromise safety.

• DO NOT move or transfer a patient with the central wheel brakes on.

• DO NOT attempt to manoeuvre the device by pushing on the patient.

• ALWAYS manoeuvre the device using the handle provided. DO NOT attempt to apply

side force to the base or frame of the device in order to manoeuvre.

• DO NOT push a loaded device at speeds exceeding a slow walking pace (3 kilometres/

hour 0.8 metres/second).

• DO NOT push the device over wet surfaces, uneven or rough ground or surfaces littered

with debris, particularly when loaded.

• DO NOT attempt to push or pull a loaded device over a floor obstruction of which the

castors are unable to ride over easily.

• DO NOT bump the device down steps, loaded or unloaded.

• DO NOT attempt to negotiate a loaded device on a slope which exceeds 1:12

(approximately 5 degrees). Joerns Healthcare recommend a second helper is present

when moving a patient on a slope.

• DO NOT park a loaded device on ANY sloping surface.

• DO NOT lift or transfer a patient unless you are trained and competent to do so.

• Your device is for patient standing and transfers. DO NOT use it, or allow it to be used,

for any other purpose.

• DO NOT use this product for self transfers; a patient must always be assisted by

caregiver(s).

• ENSURE the carergiver(s) wear appropriate footwear when using this product.

• OXFORD RECOMMENDS THE USE OF GENUINE OXFORD PARTS. Oxford sling/belt

and transfer products are designed to be compatible with one another. For country

 specicguidanceonsling/beltuseandcompatibility,pleaserefertothesling/beltlabelor

contact your local market distributor or Joerns Healthcare.

Oxford®

Switch

English

4. Operating Instructions

1. Patient Positioning

The patient’s feet are placed on the footplate taking positioning guidance from the feet

decals. The patient’s weight must be loaded centrally on the footplate with weight distribution

applied downwards through the central wheels.

WARNING

The user’s weight MUST NOT be distributed outside of the support surface. Failure to

follow this guidance may result in inadvertent tipping and consequential injury to the

patient and/or caregiver.

2. Lower Leg / Knee Support

Adjust the knee pads so that the upper edge of each pad is approximately 3cm below the

lower edge of the kneecap. To adjust the height, pull the two quick release pins and adjust

the sliding frame section to the appropriate height for the patient. Ensure both pins are

locked securely into place. The knee pads may also be tilted or repositioned horizontally by

simply sliding them left or right.

Oxford®

Switch

English

3. Brakes

There is a brake for each central wheel. To apply the brakes, press down with your foot on

the red marked surface of each pedal. Press down firmly until the brake pedal engages and

holds in position. To release the brakes, press down on the green marked surface of each pedal,

ensuring the wheels rotate freely.

4. Standing Function

It is good practice and recommended to test a patient’s standing ability prior to fully deploying

the device for a transfer, especially where there is any element of doubt.

5. Training Function

The Switch can also be used as a training aid for standing, sitting and sit-to-stand functions.

A caregiver may wish to assess the patient at regular intervals in order to evaluate their progress.

Oxford®

Switch

English

6. Transfer Function

For point-to-point transfers, firstly ensure both the existing and target transfer surface,

e.g. chair, wheelchair, commode or bed, are secure and stable, applying brakes where

applicable. For very short transfers, e.g. to a wheelchair, position the equipment in a way that

allows sufficient space to operate the Switch in advance of beginning any transfer activity.

WARNING

The caregiver(s) must ALWAYS apply supportive and counter force in a safe manner

when the user is standing up, sitting down and during transfer. Failure to do this may

result in inadvertent tipping and consequential injury to the patient and/or caregiver.

Place the patient’s feet on to the base plate, using the feet decals as a positioning guide.

Instruct the patient to lean forwards and grab hold of one of the frame rungs, appropriate to

their height, reach and comfort.

The patient is then encouraged to raise himself/herself into a standing position.

CAUTION

Caregiver(s) must ensure the patient maintains the correct position throughout the

transfer.

Manoeuvre the Switch backwards away from the starting surface and slowly move towards

the target surface, ensuring the patient feels safe, stable and comfortable.

Finally, position the Switch in front of the target surface to allow optimum and safe positioning

prior to asking the patient to gradually lower themselves in a controlled manner to a seated

position.

Oxford®

Switch

English

7. Repositioning Function (Seated)

WARNING

The caregiver(s) must ALWAYS apply supportive and counter force in a safe manner

when the user is standing up, sitting down and during transfer. Failure to do this may

result in inadvertent tipping and consequential injury to the patient and/or caregiver.

If the patient has slipped forwards in their chair or has slouched into a compromised and/or

uncomfortable position, the Switch can be deployed to help reposition him/her further back in

the chair and achieve a more upright and comfortable position.

Remove or reposition any obstructions that hinder access to the patient, e.g. wheelchair foot

plates or furniture and manoeuvre the Switch in towards the patient.

Apply both brakes on the Switch to ensure a stable and secure platform.

Place the patient’s feet on the base plate, using the feet decals as a positioning guide.

Ask the patient to lean forwards and grab hold of one of the frame rungs, appropriate to their

height, reach and comfort.

CAUTION

Caregiver(s) must ensure the patient maintains the correct position throughout the

transfer.

The patient should then raise himself/herself from the seat whilst the carer re-positions the

patient further back in the chair.

Andere Handbücher für Oxford

Inhaltsverzeichnis

Andere Joerns Medizinische Geräte Handbücher

Joerns

Joerns Oxford Bedienerhandbuch

Joerns

Joerns Oxford Stature Bedienungsanleitung

Joerns

Joerns ProCair Plus Fehlerbehebungshandbuch

Joerns

Joerns Hoyer HPL450 Bedienungsanleitung

Joerns

Joerns Oxford 0Y0050 Bedienerhandbuch

Joerns

Joerns Oxford Elevate Bedienerhandbuch

Joerns

Joerns Oxford Up Bedienerhandbuch

Joerns

Joerns Hoyer Comfort Access Bedienerhandbuch

Joerns

Joerns ACX Series Fehlerbehebungshandbuch

Joerns

Joerns Oxford UltraFine Deluxe Bedienerhandbuch

Joerns

Joerns DermaFloat LR Fehlerbehebungshandbuch

Joerns

Joerns WeCare Fehlerbehebungshandbuch

Joerns

Joerns Hoyer Bedienerhandbuch

Joerns

Joerns Chauffeur Fehlerbehebungshandbuch

Joerns

Joerns Hoyer HPL700 Leitfaden

Joerns

Joerns Oxford In-Situ Bedienerhandbuch

Joerns

Joerns OXford Full Body (Hybrid) Bedienerhandbuch

Joerns

Joerns Camtec Series Fehlerbehebungshandbuch

Joerns

Joerns Dolphin Fluid Immersion Simulation System Fehlerbehebungshandbuch

Joerns

Joerns Oxford Stretcher Adjustment Cradle Bedienerhandbuch

Joerns

Joerns Oxford Presence Bedienerhandbuch

Joerns

Joerns Oxford Bedienerhandbuch

Joerns

Joerns Oxford Elara Series Bedienerhandbuch

Joerns

Joerns Oxford Limb Lifter Bedienerhandbuch

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung