John Lewis Balance Bedienungsanleitung

IL4282

Recommended bulb

2 x 3-5 Watt G9 energy efficient LED

Specification

Max power: 5W

Voltage: 220~240V, 50/60Hz

IP20

Weight 0.7Kg

Please retain these instructions for future reference.

This symbol indicates that this product should not be treated as normal house-hold

waste and it should be recycled. John Lewis does not operate in store take back, but

as members of the Distributer Take Back scheme have funded the development and

upgrade of recycling facilities across the UK. Please take it to your nearest collection

facility or for further details contact your local council or visit www.recycle-more.co.uk.

We have taken great care to ensure that this product reaches you in perfect

condition. However, should any parts be damaged or missing please e-mail

lightingparts@JLPspares.co.uk

Trouble shooting:

Why is the light not working when switched on?

Check your power supply is switched on

Turn off light and check that the bulb is inserted correctly

Check the bulb is still in working order.

John Lewis partnership

171 Victoria Street

London SW1E 5NN

Johnlewis.com

Made in China

Issue 2 09/20

User manual

Balance 2Lt Wall

Light

IL4282

Thank you for purchasing this Balance wall light. Please read the instructions

carefully before use to ensure safe and satisfactory operations of this product.

Please keep this instruction for future reference.

Warnings!

For your safety, this product must be installed in accordance with local Building

Regulations.

If in any doubt, or where required by the law, consult a competent person who is

registered with an electrical self-certification scheme. Further information is

available online or phone your Local Authority.

To prevent electric shock, switch off the mains supply before installing or

maintaining this product. Ensure other persons cannot restore the electricity supply

without your knowledge.

Always use the correct bulb type with the correct wattage as indicated in the

specification table. This product is Class II = and should be fitted to a lighting

Supply protected by a 5 amp fuse or equivalent circuit breaker.

When changing the bulb, always switch off at the mains and allow the old bulb to

cool down before handling. Dispose of used bulbs carefully.

Caution! The bulb and surrounding parts can become hot during use.

For indoor use only.

Care instructions

We recommend cleaning with a soft dry cloth. Do not use abrasive materials as

these will damage the finish.

Replace bulb from John Lewis or established brand of the same type and

compatibility.

Parts list

Part List

Qty

Part List

Qty

Part List

Qty

Assembly

Never install your appliance on a wet, freshly painted or plastered surface. Ensure

the house electricity supply is switched off at the fuse box. If removing an existing

fitting, note down all wiring connections. Check the fixings will not touch any

existing wiring before drilling and attaching the light to the ceiling.

Ensure you thread the ceiling wires through the black insulating tube fixed to the

appliance.

Step 1

Remove mounting bracket from fitting by removing

the retaining screws and any washers, retain for later.

Using the mounting bracket as a template, mark and

then drill the fixing holes in the wall (ensure the screws

are firmly fixed into a solid or other suitable mounting

and not just the plasterboard.) Take care not to

damage wiring. Attach mounting bracket to the

mounting surface using suitable fixings. Do not attach

fitting to mounting bracket at this stage. Make sure

no wires are trapped in the process.

Step 2

Ensuring that the power has been isolated, connect

the electrical supply wires to the connector blocks

corresponding terminals. Make the electrical

connection as follows:

•Connect the supply live (normally brown or red) to

fitting live (marked “L”) on the terminal block housing.

•Connect the supply neutral (normally blue or black)

to fitting neutral (marked “N”) on the terminal block

housing.

NO EARTH must be connected to any part of this

fitting. Please note that residential wiring can vary, if

you are unsure about the correct polarity please

consult a qualified electrician. Ensure electrical

connections are tight and no loose strands of wire protrude from the terminal

block then close connector block cover by snapping back together.

Step 3

Excess cable must be carefully located inside the

ceiling cup or within the ceiling cavity itself.

Carefully offer fitting over mounting bracket then

secure in place with the screws and any washers

removed earlier.

Fit the bulb: type and wattage as indicated on the

fitting.

The wattage indicated must not be exceeded.

Fit the shades by placing the threaded hole in the shade over the lamp holder

section and rotating into place. If cross-threading occurs undo and start again.

Take care not to overtighten as this may cause damage to the fitting.

Once installation is complete, the house electricity may be restored at the fuse

box.

Step 1

Step 3

Step 2

Andere John Lewis Wohnraumbeleuchtung Handbücher

John Lewis

John Lewis Emilia Crystal Bedienungsanleitung

John Lewis

John Lewis TONY Bedienungsanleitung

John Lewis

John Lewis DUO GLASS SHELF FLOOR LAMP Bedienungsanleitung

John Lewis

John Lewis Charter Table light Bedienungsanleitung

John Lewis

John Lewis Jester Bedienungsanleitung

John Lewis

John Lewis Montserrat gold Bedienungsanleitung

John Lewis

John Lewis Shelby 3lt floor task Bedienungsanleitung

John Lewis

John Lewis Levity Bedienungsanleitung

John Lewis

John Lewis CUBOID Bedienungsanleitung

John Lewis

John Lewis HERRINGBONE IP44 WALL LIGHT Bedienungsanleitung

John Lewis

John Lewis Tobias nickel Bedienungsanleitung

John Lewis

John Lewis IL4017 Bedienungsanleitung

John Lewis

John Lewis MYKKI Bedienungsanleitung

John Lewis

John Lewis Devon Bedienungsanleitung

John Lewis

John Lewis Grayson Compact Bedienungsanleitung

John Lewis

John Lewis Century Wireless Charging Table Lamp Bedienungsanleitung

John Lewis

John Lewis Robertson Bedienungsanleitung

John Lewis

John Lewis Emilia Bedienungsanleitung

John Lewis

John Lewis Emilia Bedienungsanleitung

John Lewis

John Lewis Delaney Tall Bulbholder Bedienungsanleitung

John Lewis

John Lewis Abigail Bedienungsanleitung

John Lewis

John Lewis SWING ARM FLOOR LAMP Bedienungsanleitung

John Lewis

John Lewis Natalie Bedienungsanleitung

John Lewis

John Lewis BALDWIN Bedienungsanleitung

Beliebte Wohnraumbeleuchtung Handbücher anderer Marken

JONATHAN Y

JONATHAN Y JYL5019A Bedienungsanleitung

JONATHAN Y

JONATHAN Y JYL6007A Bedienungsanleitung

Philips

Philips Ledino 31606/11/16 Bedienungsanleitung

Salus

Salus UG600 Bedienungsanleitung

Safavieh Lighting

Safavieh Lighting CANDRI TBL4427A Bedienungsanleitung

Hunter

Hunter Bullet Spotlight Kit Gebrauchsanweisung

Philips

Philips Ledino 16811/87/16 Bedienungsanleitung

Philips

Philips 405441213 Bedienungsanleitung

Philips

Philips Halogen Light Bedienungsanleitung

Pentair

Pentair GLOBRITE Bedienungsanleitung

Philips

Philips 55592-30-16 Bedienungsanleitung

Livoo

Livoo Night light Bedienungsanleitung

Schwaiger

Schwaiger NFL45 Bedienungsanleitung

FRITZ HANSEN

FRITZ HANSEN AQ01 PLUG-IN Bedienungsanleitung

MOOD

MOOD CORSIN JY-16 Bedienungsanleitung

Safavieh Lighting

Safavieh Lighting KREMP TBL4409A Bedienungsanleitung

JONATHAN Y

JONATHAN Y JYL8019 Bedienungsanleitung

XTRASUN

XTRASUN XTDEOKT1 Bedienungsanleitung