John Lewis Ashton High Sleeper Bed Bedienungsanleitung

John Lewis Stock Code 803/60512, 803/60813

Thank you for purchasing this Ashton High Sleeper. Please read the instructions carefully before use

to ensure safe and satisfactory operation of theis product.

Pre-assembly Preperation

Please ensure that instructions are read in full before attempting to assemble this product.

Please check the pack contents before attempting to assemble this product. A full

checklist of components are given in this leaflet. If any components are missing,

please contact the John Lewis helpline.

This product is HEAVY, it should be assembled as near as possible to the point of

use. TAKE CARE WHEN LIFTING to avoid personal injury and (or) damage to the

product.

This product takes approximately 150 MINUITES to assemble with 2 PEOPLE.

The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM

YOUNG CHILDREN.

If you require any additional information or have any issues with this product please

call the John Lewis helpline on 01244 689949 or email [email protected]

Fittings Checklist

Allen Key M4

Barrel Nut

Camfix

Minifix

Bolt M6 x 100mm

Bolt M6 x 50mm

Bolt M6 x 35mm

Bolt M6 x 30mm

CSK Wooden Screw

M4 x 50mm

CSK Wooden Screw

M4 x 32mm

CSK Wooden Screw

M3.5 x 16mm

Handle Bolt

Pan Head Wooden

Screw

Handle

Hinges 7/8’’

Spring Washer

Shelf Pin

Wood Dowel

M10 x 50mm

Wood Dowel

M8 x 30mm

Parts Checklist

Slats

Headboard Panel

Headboard Bottom Panel

Leg Pole (Left)

Leg Pole (Right)

Short Guard Rail

Long Guard Rail

Ladder Support

Ladder Vertical Rail

Ladder Horizontal Rail I

Ladder Horizontal Rail II

Side Rail Front

Side Rail Back

Bottom Side Rail

Step 1

Insert Dowel M10 x 50mm (S) and Barrel Nut M6 (B) into the Headboard Panel (1) and Headboard

Bottom Panel (2) as shown. Attach Headboard Panel (1) and Headboard Bottom Panel (2) to the Leg

Pole Left (3) and Leg Pole Right (4) using A Phillips Head Screwdriver and Allen Key M4 (A). Please

use a Phillips Head Screwdriver to align the Barrel Nut M6 (B) into the hole position to ensure Bolt

M6x 100mm (F) is fully secured. Then repeat to assemble the Headboard Panel (1) to both Leg

Poles (3) & (4) for other end.

Step 2

Insert Barrel Nut (B) into Side Rail Front (11), Side Rail Back (12) and Bottom Side Rail (13), using the

pre-drilled holes on both ends. Attach Side Rail Back (12) to the Headend and Footend. Then tighten it using

the Bolt M6 x 100mm (F) with Allen Key M4 (A). Repeat this for the Side Rail Front (11). Attach

Bottom Side Rail (13) to the headend and the footend and tighten it using Bolt M6 x 100mm (F) with Allen

Key M4 (A).

Please ensure that parts 11, 12 and 13 have been correctly positioned as shown in the above diagram. Part 11

must be correctly positioned to allow the ladders to be attached to the correct side of the high sleeper.

Please Note: Only 1 headboard bottom

panel (2) is required.

Step 3

Lay out the Horizontal Rail I (9), Ladder Horizontal Rail II (10) and Ladder Vertical Rail (8) as shown

below.

Step 4

Insert Barrel Nut M6 (B) into Ladder Horizontal Rail II (10) then push the Ladder Horizontal Rail II

(10) into the pre-drilled grooves in the Right Ladder Vertical Rail (8) and secure with Bolt M6

x 50mm (G) with Allen Key M4 (A) as shown in the diagram below. Insert Ladder Horizontal Rail I (9)

into the pre-drilled grooves. Repeat for Left Ladder Vertical Rail (8).

Step 5

Attach the ladder to Side Rail Front (11) using Bolt M6x 35mm (H) and tighten it using Allen

Key M4 (A) as shown below.

Please note: The grooved lines indicate the point which the mattress should not exceed, the

maximum height of the mattress to be used is 19cm.

Recommended size mattress is L:190cm, W: 90cm, H:19cm (max)

Step 6

PLEASE NOTE: The slats at each end have been cut to allow them to fit so that there are NO GAPS.

Starting at one end of the bed, secure the first fitted slat into place using Screw (K). Next secure the fitted

slat to the other end and secure using Screw (K) ensuring that there are NO GAPS between the slats and

the Headboards. Finally secure the rest of the Slats into place using Screw (K) as shown in the diagram

below using a Phillips Head Screwdriver.

WARNING

Maximum height of

the mattress. DO NOT

EXCEED THIS LINE.

Note: Ladder can be placed

either end of High Sleeper.

Step 7

Insert Dowel M8 x 30mm (T) into the bottom of Short Guard Rail (5) and Long Guard Rail (6). Attach

Long Guard Rail (6) to Side Guard Rail Back (12) and use bolt M6 x 100mm (F) to secure

to Leg Pole Left (3) and tighten bolts using Allen Key M4 (A). Then attach Short Guard Rail (5) to the

Side Rail Front (11) and use bolts M6 x 100mm (F) to fix it into Leg pole Right (4) and tighten

screws using Allen Key M4 (A).

Step 8

Attach Ladder Support (7) to Short Guard Rail (5) using bolt M4 x 35mm (H) and tighten it

using Allen Key M4 (A).

Please Note: Ensure all fittings are securely tightened before use.

Warning: Children can become trapped between the bed and the wall. To avoid risk of serious

injury the distance between the wall and the top safety barrier should be less than 75mm or more

than 230mm.

Parts Checklist for Book Rack

Horizontal Rail

Vertical Rail

Side Rail

Step 1

Insert Dowel M8 x 30mm (T) to Horizontal Rail

(1) and Vertical Rail (2) in pre-drilled holes.

Then insert Minifix (D) to Side Rail (3) as shown

below.

Step 2

Attach Vertical Rail (2) to Horizontal Rail (1) and

tighten using Camfix (C) with a Phillips Head

Screwdriver as shown in the diagram below.

Step 3

Attach Side Rail (3) to Horizontal Rail (1) and

Vertical Rail (2), tighten using Camfix (c) with

a Phillips Head Screwdriver as shown in the

diagram below.

Step 4

Attach Book Rack assembly inside the Ashton

High Sleeper Bed as shown in the diagram

below. Then using bolt M6 x 35mm

(H) and tighten using Allen Key M4 (A). Make

sure bolt M6 x 35mm (H) can be inserted

and tightened in the Book Rack, Bed Right and

Left Leg Poles.

Note: Please ensure the minix (D) used on the above step is

11mm not 9mm.

x 2

Please Note: Part 1 above is tted ush

to the top of part 2.

Parts Checklist for Desk

Back Panel

Shelf

Door Panel

Table top Side Rail

Bottom Panel

Back Bottom Panel

Table Top

Side Panel Left and Right

Table Top Support Rail

Support Rail

Front Bottom Rail

Inhaltsverzeichnis

Andere John Lewis Inneneinrichtung Handbücher

John Lewis

John Lewis Resto Bedstead Bedienungsanleitung

John Lewis

John Lewis Devon 820/81602 Bedienungsanleitung

John Lewis

John Lewis Marlow 82002403 Bedienungsanleitung

John Lewis

John Lewis Pole bar bay pole Bedienungsanleitung

John Lewis

John Lewis Glass Shelf Bedienungsanleitung

John Lewis

John Lewis Simba Hybrid 80355515 Betriebsanleitung

John Lewis

John Lewis Devon Wardrobe Bedienungsanleitung

John Lewis

John Lewis Grayson 862 26201 Bedienungsanleitung

John Lewis

John Lewis Franklin 862 39202 Bedienungsanleitung

John Lewis

John Lewis 877/12802 Bedienungsanleitung

John Lewis

John Lewis Eyelet Curtain Pole Kit Bedienungsanleitung

John Lewis

John Lewis Grace Bed Bedienungsanleitung

John Lewis

John Lewis FELT MAGAZINE RACK 57020306 Bedienungsanleitung

John Lewis

John Lewis Emily Storage Bed Bedienungsanleitung

John Lewis

John Lewis Morgan 2 Drawer Bedside 803/16408 Bedienungsanleitung

John Lewis

John Lewis Calia 836 03005 Bedienungsanleitung

John Lewis

John Lewis Calia Bedstead 135 Cm Bedienungsanleitung

John Lewis

John Lewis Dara 803 18203 Bedienungsanleitung

John Lewis

John Lewis Devon 803/61603 Bedienungsanleitung

John Lewis

John Lewis FOUR TIER SHOE RACK Bedienungsanleitung

John Lewis

John Lewis Grace Bedienungsanleitung

John Lewis

John Lewis ABACUS 816 / 00204 Bedienungsanleitung

John Lewis

John Lewis Tropez 862 25602 Bedienungsanleitung

John Lewis

John Lewis Lymington 1 drawer bedside 803 19502 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung