John Lewis Pole bar bay pole Bedienungsanleitung

John Lewis Pole bar bay pole

Necessary Tools

Fittings and parts checklist

Per Corner

a Corner Joint 1

b Passing Bracket 2

c Rings Approx. 1 per 10cm of Pole

Quantities Required

Thank you for purchasing this product. Please read the instructions carefully before use to ensure

safe and satisfactory operation of this product.

Pre-assembly preparation

Please ensure instructions are read in full before attempting to assemble this product

Please check the pack contents before attempting to assemble this product. A full checklist of

components is given in this leaet. If any components are missing, please contact the retailer from

whom you bought this product.

This product takes approximately 60 MINUTES to assemble with 2 PEOPLE.

The ttings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG

CHILDREN.

Read this leaet in full before commencing assembly.

Each Bracket is supplied with - 3x Screws - 3x Wall plugs

If ceiling xing you must use the Top Fix Bracket.

To t a pole into a bay window you will need enough pole as laid out in Step 1.Three brackets,

one for each end and one centre bracket.You will aslo need the following per corner.

THE BAY POLE IS NOT SUITABLE FOR EYELET STYLE CURTAINS

Step One

Step Two

a c

a+b+c= total length of pole

a c

x y

a+b+c= total length of pole

x y

a+b+c+d+e= total length of pole

10cm Standard bend Reverse bend

MIN. 8cm

10cm

zww

Bend Bend

10cm

zww

Bend Bend

Measure the lengths of pole

Straight lengths over 1.2m will require a support or end bracket.

Should you wish to dress your curtains outside of the bay recess, this is possible by reverse

bending the corner joint.You will need to add x+y into your pole calculations.The minimum

length for x or y is 10cm.

Calculate the position of the passing brackets at w and z by laying the bay pole parts out on the

oor of your bay window, ensuring that the centre of the pole is 10cm from the wall.

DO NOT CUT THE POLES!

The passing brackets should support the joint between the bend and the pole.

Dimension z should be a minimum of 8cm.

Mark the positions of the brackets on the wall using the diagram below as a guide.

Note - Diagram for ceiling installation

Wall xing - if in doubt seek professional advice

Step by step assembly instructions

Wood

If xing to wood

make sure that it isn’t

chipboard as screws can

easily pull away from the

core structure

Brick or Masonry

Use an appropriate

wall plug provided you

are sure your wall is

sound

Cavity wall

Special toggle wall

plugs are needed. Seek

expert advice

Step Four

Step Five

Step Three

Step Six

pole

centre

10.5mm

28mm Bracket 19mm Bracket 28mm Bracket 19mm Bracket

10cm

zww

Bend Bend

10cm

zww

Bend Bend

90º

Note - Diagram for ceiling installation

Note - 1may be made of

two lengths of poles which

will require a centre joint.

Starting in the middle of the window, build the pole outwards cutting the poles to length as

required.

1.To achieve a smooth glide of your curtain, ensure that each

joint is evenly bent.

The maximum bend angle for a 19mm and 28mm bay bend

is 90 °.

2.When you are happy with the bend prole, tighten the

screws to lock it into position.

1. Slide the bracket onto the wall mounting plate,

ensuring that the base of the bracket is ush with

the wall.

2.Tighten the locking screw.

Cutting pole

1. Mask the area to be cut to avoid

damaging the pole.

2. When using two poles, cut equal

lengths from each pole.

3. File sharp edges and the inside of the

cut poles to remove burr and to avoid

injury or damage to other components.

1. Join the corners to the pole by pushing the

bung into the pole.

2. Place the pole and bend onto the passing

bracket.

Use the wall mounting plate as a template to mark the hole positions.

9005L/ISS4

Step Nine

Step Ten

Step Eleven

Step Seven

Step Eight

Only use a Step Ladder to install this product.

Do Not over reach.Always move the Step Ladder so that you are in a safe working position.

Do Not hold or lean on the track to support your weight.

We recommend you use two people for installation of larger tracks.

Take care when using power tools, use of a Residual Current Device (RCD) is recommended.

Always use eye protection when drilling.

Beware of hidden pipe runs and cables.

No liability will be accepted for damage or injury caused by incorrectly installed or assembled

furniture.

John Lewis Partnership 171 Victoria Street London SW1E 5NN

www.johnlewis.com

PLEASE KEEP OUT OF THE REACH OFYOUNG CHILDREN.

SMALL PARTS - CHOKING HAZARD

PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

PLEASE KEEP THE BATCH CODE ON THE PACKAGING FOR FUTURE REFERENCE IF

ANY QUERIES

Safety Instructions

1. Position one ring between the bracket

and the nial.

2. Push the nial onto the end of the pole.

3.Tighten the retaining screw if applicable.

1. Equally space curtain hooks along the curtain

header, you will require one hook for every ring.

2. Place the hooks through the eyelet on the

ring.

1.Test the installation by drawings the curtains

across the pole.

Before placing the last section of pole into the end

bracket, add the C rings. If using a centre bracket ensure

that the rings are distributed evenly either side of the

centre bracket

We recommend one ring per 10cm of pole.

1. Loosen the pole retainer and rotate 90 degrees.

2. Place the pole into the bracket.

3. Rotate the pole retainer back 90

degrees returning into the slot and

tighten screw until the pole does

not slide in the bracket.

Inhaltsverzeichnis

Andere John Lewis Inneneinrichtung Handbücher

John Lewis

John Lewis Felix 2 Door Wardrobe Oak Bedienungsanleitung

John Lewis

John Lewis 82089649 Bedienungsanleitung

John Lewis

John Lewis 049 Bedienungsanleitung

John Lewis

John Lewis Franklin 820 39501 Bedienungsanleitung

John Lewis

John Lewis Aldgate 816/82501 Bedienungsanleitung

John Lewis

John Lewis Vienna 862 22403 Bedienungsanleitung

John Lewis

John Lewis 803/15701 Bedienungsanleitung

John Lewis

John Lewis Ivybridge Le Bedstead 80344001 Bedienungsanleitung

John Lewis

John Lewis 803/12315 Bedienungsanleitung

John Lewis

John Lewis 87702431 Bedienungsanleitung

John Lewis

John Lewis Skye 803/49101 Bedienungsanleitung

John Lewis

John Lewis ESSENCE OAK Bedienungsanleitung

John Lewis

John Lewis Mantis Desk 816 28704 Bedienungsanleitung

John Lewis

John Lewis Emily Small Double Bedienungsanleitung

John Lewis

John Lewis Seek 83612801 Bedienungsanleitung

John Lewis

John Lewis Charlotte Bed Bedienungsanleitung

John Lewis

John Lewis Resto Bedstead Bedienungsanleitung

John Lewis

John Lewis Vienna 862 22406 Bedienungsanleitung

John Lewis

John Lewis Emily Storage Bed Bedienungsanleitung

John Lewis

John Lewis COLOSSEUM Bedienungsanleitung

John Lewis

John Lewis Duhrer 836 03704 Bedienungsanleitung

John Lewis

John Lewis BRONTE EXTENSION DINING TABLE Bedienungsanleitung

John Lewis

John Lewis Downton 803/06801 Bedienungsanleitung

John Lewis

John Lewis Miami 4 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung