John Lewis COLOSSEUM 24401 Bedienungsanleitung

28655-1

John Lewis

COLOSSEUM ladder desk

Stock number: 24401

Thank you for purchasing this COLOSSEUM ladder desk. Please read the instructions carefully before

use to ensure safe and satisfactory operation of this product

Pre-assembly preparation

Please ensure instructions are read in full before attempting to assemble this product

Necessary Tools

Please check the pack contents before attempting to assemble this product. A full checklist of compo-

nents is given in this leaflet. If any components are missing, please contact the retailer from whom you

bought this product.

This product takes approximately 20 MINUTES to assemble with 2 PEOPLE.

The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG

CHILDREN.

Read this leaflet in full before commencing assembly.

28655-1

Fittings and parts checklist

1RIGHT rail x 1 2LEFT rali x 1 3Left support rail x 1

4Right support rail x 1 5 Back panel x 1 6 Desk x 1

7 Fixed shelf 7 x 1

(70x18 cm) 8 Fixed shelf 8 x 1

(70x13,5 cm)

AScrew 7x70 x 9 EWall plug x 2

BCover caps x 6 FScrew M6x35

x 2

C Screw 5x80 x 2 G Screw M6x35

x 4

D Dowels 8x30

x 10

H Allen key x 1

28655-1

Step Two

1. Take the desk (6) lay it on the clean and flat surface.

2. Insert four dowels (D) into the holes provided.

Step by step assembly instructions

Dx6

Step One

1. Take the left (3) and right (4) support rail and lay them on the clean and flat surface with the

predrilling holes uppermost.

2. Insert six dowels (D) into the holes provided

Dx4

28655-1

Step Three

1. Take the desk (6) and lay it on the clean and flat surface with the predriling holes uppermost.

2. Locate the left and right support rail (3, 4) onto the desk (6) as shown in the picture.

3. Insert the four screws (G) into the holes provided.

4. Tighten the four screws (G) using the crosshead screwdriver.

Step Four

1. Locate the back panel (5) onto the desk (6) as shovn in the picture. Be sure that holes of wall

fixing are at the side where are support rails.

2. Insert three screws (A) into the holes provided.

3. Tighten the three screws (A) using the allen key (H).

Gx4

213 mm

Ax3

Hx1

213 mm

!!!

28655-1

Step Six

1. Locate the fixed shelf 7 (7) and fixed shelf 8 (8) onto the right rail (1) as shown in the picture.

2. Insert two screws (A) into the holes provided.

3. Tighten the two screws (A) using allan key (H).

6 4

Step Five

1. Take preassembled desk with rails (3,4,5,6) and lay it on clean and flat surface as shown in the

picture.

2. Locate the right rail (1), onto preassembled desk with rails (3,4,5,6) as shown in the picture.

3. From outside of ladder insert one screw (A) and insert one screw (F) from inside of ladder into

the holes provided.

4. Tighten the one screw (A) and one screw (F) using allan key (H).

Ax1 Hx1

Ax2

Hx1

Fx1

28655-1

Step Eight

1. With help, turn the carcase of the lader desk and place the unit against the wall in its finall

location.

Step Seven

1. Locate the left rail (2), onto desk (6) and fixed shelf (7, 8) as shown in the picture.

2. Insert three screws (A) through the left rail (2) into fixed shelf (7, 8) and desk (6) as shown in

the picture.

3. Insert one screw (F) through the left support rail (3) into left rail (2) as shown in the picture.

4. Tighten the three screw (A) and one screw (F) using

allan key (H).

Ax3 Fx1 Hx1 F

28655-1

Step Seven

1. Insert the six cower caps (B) into the holes as shown in the picture.

Bx6

28655-1

Wall fixing - if in doubt seek professional advice

Wood

If fixing to wood make

sure that it isn’t chipbo-

ard as screws can easily

pull away from the core

structure

Brick or Masonry

Use an appropriate

wall plug provided you

are sure your wall is

sound

Cavity wall

Special toggle

wall plugs are

needed. Seek

expert advice

Step Eight

1. Place the Colosseum ladder desk on its final place.

2. Mark the two drill hole positions on wall.

3. Remove the unit and drill a 8mm diameter hole to a depth of 65mm in the marked positions.

4. Insert wall plug supplied.

5. With help, lift the unit up and aligning the holes, fix to the wall using the screws supplied and

tighten fully.

The assembly is now complete.

28655-1

Care and Maintenance

Wood Furniture

Wood displays different grain patterns depending on which way they cut - for example, the ‘medullary

ray’ which can appear on oak furniture is a mark of good quality timber - these are just characteristics

of the natural beauty of the wood. Some furniture is also deliberately aged and rustic.

Wood veneers also allow distinctive patterns to be created on flat surfaces, such as table tops and

drawer fronts by the way the slivers are arranged.

All timber surfaces will change colour and mellow over time. New furniture will initially vary in shade

from items that have been previously purchased.

How to care for your wood furniture

Furniture with a hard lacquer, wax polish or painted surface should be dusted with a dry cloth.

Waxed furniture will need to be given a coat of beeswax a couple of times a year to help maintain its

luster.

Spray polishes are best avoided as they contain silicones which may spoil the furniture’s surface by

building up over time.

Make sure all surfaces are protected from heat and liquids by mats and coasters. Wipe up spills

immediately and ensure that a mat or pad is placed under paper if you are writing.

Our furniture will endure most temperatures in the home but it is best to avoid placing furniture next

to heat sources such as radiators or fires. Be particularly careful with solid wood as the lack of

humidity caused by central heating can cause damage such as warping

General warnings:

Never drag furniture when moving it, always lift it.

Periodically check all fixings to ensure none have come loose and re-tighten where necessary.

Please take care when handling or moving the furniture as careless handling may cause damage or

injury. Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a

competent person. No liability will be accepted for damage or injury caused by incorrectly insalled or

assembled furniture.

Specific warnings for heavy items:

It is recommended that before moving heavy objects to a new location they are completely dis-

assembled to avoid personal injury or damage to the furniture. Please be careful to retain all fittings

when doing this.

PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

John Lewis Partnership 171 Victoria Street London SW1E 5NN

www.johnlewis.com

Safety Instructions

Inhaltsverzeichnis

Andere John Lewis Inneneinrichtung Handbücher

John Lewis

John Lewis FELT MAGAZINE RACK 57020306 Bedienungsanleitung

John Lewis

John Lewis Moritz Bedienungsanleitung

John Lewis

John Lewis Wilton 803/42903 Bedienungsanleitung

John Lewis

John Lewis Simba Hybrid 80355515 Betriebsanleitung

John Lewis

John Lewis Calia 836 03001 Bedienungsanleitung

John Lewis

John Lewis Aldgate 816/82501 Bedienungsanleitung

John Lewis

John Lewis Vienna 862 22403 Bedienungsanleitung

John Lewis

John Lewis Enzo 836 08902 Bedienungsanleitung

John Lewis

John Lewis Mia 810/84103 Bedienungsanleitung

John Lewis

John Lewis ABACUS 816/00201 Bedienungsanleitung

John Lewis

John Lewis GARMENT RAIL Bedienungsanleitung

John Lewis

John Lewis Scandi Solution Bedienungsanleitung

John Lewis

John Lewis Medan double bed 803 51803 Bedienungsanleitung

John Lewis

John Lewis 803/50402 Bedienungsanleitung

John Lewis

John Lewis BALANCE 862/70101 Bedienerhandbuch

John Lewis

John Lewis Rachel Dresser Bedienungsanleitung

John Lewis

John Lewis 800/86402 Bedienungsanleitung

John Lewis

John Lewis CSL 220-JL Bedienungsanleitung

John Lewis

John Lewis REIGN CRYSTAL PENDANT Bedienungsanleitung

John Lewis

John Lewis Ovum 324 32401 Bedienungsanleitung

John Lewis

John Lewis 816/84102 Bedienungsanleitung

John Lewis

John Lewis Rachel chest of drawers Bedienungsanleitung

John Lewis

John Lewis Devon 820/81602 Bedienungsanleitung

John Lewis

John Lewis JL SCND 1200/17 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung