John Lewis Emily Storage Bed Bedienungsanleitung

Double

For product support or spare parts please call

the John Lewis Helpline;

T: 01244 689949

E: [email protected]

Emily Storage Bed

PRE-ASSEMBLY PREPARATION

Please check the pack contents before attempting to assemble this product. A full checklist of components is

given in this leaflet. If any components are missing, please contact the John Lewis Helpline.

This product is HEAVY. It should be assembled as near as possible to the point of use. TAKE CARE WHEN

LIFTING to avoid personal injury and (or) damage to the product.

This product takes approximately 90 MINUTES to assemble with 2 PEOPLE.

The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.

Read this leaflet in full before commencing assembl

Do not use power tools to assemble.

If you require any additional information or have any issues with this product please call the

John Lewis Helpline on 01244 689949 or email [email protected]

John Lewis

Please ensure instructions are read in full before attempting to assemble this product.

Necessary Tools

1/9

Thank you for purchasing this Emily storage bed. Please read the instructions carefully before use to

ensure safe and satisfactory operation of this product.

2/9

Wide Centre Caps x 8

Wide Side Caps x 16

Fittings and parts checklist

M4 Allen Key x 1 pcs

M5 Allen Key x 1 pcs

Side Plastic Caps x 14 pcs

M8 Spring Washer x 8 pcs

Centre Plastic Caps x 7 pcs

M8 X 16mm Bolt x 8 pcs

M6 X 25mm Bolt x 2 pcs

M6 X 40mm Bolt x 8 pcs

Screw 3.5 x 30mm x 40pcs

Screw 4 x 50mmx 4pcs

Screw 4 x 18mm x 8pcs

Fittings

3/9

Headboard x 1 Footboard x 1 Side Rails x 2

Slats x 14 Wide Slats x 16

Drawer Runner Base x 2 Drawer Centre Support x 1

Drawer Sides x 4 Drawer Fronts x 2 Drawer Backs x 2

Drawer Bottoms x 2

Centre Rail x 1

Legs x 4

Upholstered Front Panels x 2 Drawer Bottom Supports x 6

12 3

456

7 8 9

10 11 12

13 14 15

Metal Stopper x 4

Parts

4/9

Head/Foot

Board

Preinserted Nut

Wooden Leg (7)

Legs x 4

Step Two

Step by step assembly instructions

Step One

Place Wooden Legs (7) into the holes in the underside of the Headboard (1) and Footboard (2) as per

diagram below and twist into place so they are fully secured.

BRACKET

SIDE RAIL

BRACKET

SIDE RAIL

Hook the pre-attached brackets on the Side Rails (3) over the pre-inserted bolts in the head and footboard and

hand-tighten bolts to loosely secure parts together. Do not tighten with the M5 Allen Key (B) until you have

inserted the Centre Rail in Step Five.

LOOSELY SECURE PARTS

TOGETHER IN ORDER FOR

CENTRE RAIL TO FIT IN

STEP FIVE

5/9

Step Three

Step Four

Attach M8 Spring Washer (G) and M8 x 16mm Bolt (H) into the metal fixings on to both Drawer Runner Base (8)

(only for the top side). Insert the Drawer Runner Base (8) inside the bed frame as shown in Step 2. Next, attach the

M8 Spring Washer (G) and M8 x 16mm bolt (H) into the bottom side of metal fixing on the Drawer Runner Base (8).

Loosely tighten the bolts using M5 Allen key (B).

M8 x 16mm

Bolt

x 8

M8 Spring Washer

x 8

M8 x 16mm

Bolt (H)

M8 Spring Washer (G)

STEP 1

M5 Allen Key x 1

G. H.

LOOSELY SECURE PARTS

TOGETHER IN ORDER FOR

CENTRE RAIL TO FIT IN

STEP FIVE

Fig 2

M5 Allen Key

(B)

STEP 2

Screw

4 x 50mm x 4

Attach Drawer Centre Support (9) to Drawer Runner Base (8) and secure into place using Screws 4 x 50mm (K)

as shown in the diagram below.

Cross head

Screw Driver

Screw

4 x 50mm (I)

Screw 4 x 50mm (K)

6/9

Step Five

Step Six

M4 Allen Key (A)

M6 x 25mm (I)

M4 Allen Key x 1 M6 x 25mm Bolt x 2

A. I.

AFTER INSERTING CENTRE

RAIL, TIGHTEN ALL FIXINGS

FULLY INCLUDING BOLTS

AT SIDE RAILS (FROM

STEP TWO)

Insert Centre Rail (6) into the brackets on the Headboard (1) and Footboard (2). Push down fully and

secure in place using M6 x 25mm Bolts (I). Tighten using M4 Allen Key (A). You can now tighten the bolts

with M5 Allen Key (B) at the Side Rails from Step Two so all fastenings are now tightened.

(x2)

3.5 x 30mm(40)

Cross Head

Screw Driver

Fig. 1 Fig. 2 Fig. 3

To construct the drawers, fix Drawer Front (11) with one end of each Drawer Bottom Support (15) using

Screws 3.5 x 30mm (L) as shown in Fig.1, then fix the Drawer Sides (10) to the Drawer Back (12).

Next, insert Drawer Bottom (13) and then fix Drawer Front (11) using Screws 3.5 x 30mm (L) as shown in

Fig.2. Finally, secure the other end of the Drawer Bottom Supports (15) to the other side of the drawer and

tighten using a cross head screw driver.

7/9

Step Seven

Step Eight

M6 x 40mm x 8

M4 Allen Key x 1

Attach Upholstered Front Panel (14) to drawer and tighten together using M6 x 40mm Bolt (J).Tighten with

M4 Allen Key (A).

A. J.

14 14

16.M.

Metal Stopper x 4

Slide drawers into both sides of the bed frame. Attach Metal Stopper (16) to the Drawer Runner base (8)

using screw 4 x 18mm (M).

Screw 4 x 18

x 8

8/9

2 Lines

Normal slats

1 Line

Normal slat

2 Lines

Wide slats

2 Lines

Wide slats

2 Lines

Normal slats

2 Lines

Normal slats

4 Lines

Wide slats

ZONE 2

ZONE 1

ZONE 5

ZONE 7

ZONE 6

ZONE 4

ZONE 3

Diagram 1

(x8)

(x7)

Side Caps x 14

Wide Centre Caps

x 8

Wide Side Caps

x 16

Wide Slats x 16

Slats x 14

With the curved side facing upwards, insert 2 slats into a centre cap then into 2 side caps on either

end(x15). (Please note the Wide Slats must be inserted with the Wide Centre Caps (E) and Wide

Side Caps (F)). Repeat this process for all slats.

Note: Please see the Diagram 1 below to arrange the slat with the correct system).

Centre Caps x 7

Step Ten

Step Nine

The bed is now ready for use.

9/9

Care and Maintenance

Safety Instructions

If you require any additional information or have any issues with this product please call

the John Lewis Helpline on 01244 689949 or email [email protected]

John Lewis Partnership 171 Victoria Street, London, SW1E 5NN.

www.johnlewis.com

Never drag furniture when moving it. Always lift it.

Periodically check all fixings to ensure none have come loose and re-tighten where necessary.

Please take care when handling or moving the furniture as careless handling may cause damage or injury.

Furniture can be dangerous if incorrectly installed. Any assembly should be carried out by a competent

adult.

No liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.

During assembly, children should be kept away from the product due to possible risk of injury.

Do not use this item if any components are missing or damaged.

It is recommended that care is taken when moving heavy objects to a new location to avoid

personal injury or damage to the furniture. Please be careful to retain all fittings when doing this.

This Emily Storage Bed should be cleaned using a soft damp cloth and dried immediately.

Do not use a very wet cloth or allow any liquid contact for a long period of time as this can permanently

damage the surface.

Do not use detergents and do not rub as this can cause permanent damage.

Always protect your bed from direct sunlight as this may accelerate the natural ongoing discolouration

process.

Bolts holding together the bed frame should be tightened regularly.

Please retain this information leaflet for future reference.

This product complies with BS EN 1725:1998.

Andere Handbücher für Emily Storage Bed

Inhaltsverzeichnis

Andere John Lewis Inneneinrichtung Handbücher

John Lewis

John Lewis 83601801 Bedienungsanleitung

John Lewis

John Lewis Tranquil 86275001 Bedienungsanleitung

John Lewis

John Lewis 803/50402 Bedienungsanleitung

John Lewis

John Lewis Rouen Bedienungsanleitung

John Lewis

John Lewis Moritz Bedienungsanleitung

John Lewis

John Lewis Giorgio Bed Bedienungsanleitung

John Lewis

John Lewis Calia 836 03001 Bedienungsanleitung

John Lewis

John Lewis 803/46203 Bedienungsanleitung

John Lewis

John Lewis 80311205 Bedienungsanleitung

John Lewis

John Lewis Skye 803/49101 Bedienungsanleitung

John Lewis

John Lewis Daisy 803/41404 Bedienungsanleitung

John Lewis

John Lewis Ollie 80346601 Bedienungsanleitung

John Lewis

John Lewis 82006902 Bedienungsanleitung

John Lewis

John Lewis Carter Desk White Bedienungsanleitung

John Lewis

John Lewis Morgan 803/16409 Bedienungsanleitung

John Lewis

John Lewis Burford 820 34304 Bedienungsanleitung

John Lewis

John Lewis JL Almera Bedienungsanleitung

John Lewis

John Lewis Devon 803/61603 Bedienungsanleitung

John Lewis

John Lewis 87722751 Bedienungsanleitung

John Lewis

John Lewis Emily Storage Bed Bedienungsanleitung

John Lewis

John Lewis Portman Bedstead Bedienungsanleitung

John Lewis

John Lewis St. Ives 80343003 Bedienungsanleitung

John Lewis

John Lewis 803 51503 Bedienungsanleitung

John Lewis

John Lewis Mixit 80324203 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung