John Lewis Rouen Bedienungsanleitung

1/10

For product support or spare parts please call

the John Lewis Helpline;

T: 01244 689949

E: [email protected]

Rouen Storage Bed

PRE-ASSEMBLY PREPARATION

Please check the pack contents before attempting to assemble this product. A full checklist of components is

given in this leaflet. If any components are missing, please contact the John Lewis Helpline.

This product is HEAVY. It should be assembled as near as possible to the point of use. TAKE CARE WHEN

LIFTING to avoid personal injury and (or) damage to the product.

This product takes approximately 90 MINUTES to assemble with 2 PEOPLE.

The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.

Read this leaflet in full before commencing assembl

Do not use power tools to assemble.

If you require any additional information or have any issues with this product please call the

John Lewis Helpline on 01244 689949 or email [email protected]

John Lewis

Please ensure instructions are read in full before attempting to assemble this product.

Necessary Tools

Thank you for purchasing this Rouen Storage Bed. Please read the instructions carefully before use to

ensure safe and satisfactory operation of this product.

King, Superking

2/10

Fittings and parts checklist

M8 Spring Washer x 10 pcs

M8 x 16mm Bolt x 8 pcs

M6 x 25mm Bolt x 6 pcs

M6 x 40mm Bolt x 8 pcs

Screw 3.5 x 30mm x 42pcs

Screw 4 x 18mm x 8pcs

Screw 4 x 50mm x 4pcs

M13 Spanner x 1 pcs

M8 Nut x 2 pcs

Wide Centre Caps x 8

Wide Side Caps x 16

M4 Allen Key x 1 pcs

M5 Allen Key x 1 pcs

Side Caps x 16 pcs

Centre Caps x 8 pcs

Fittings

3/10

Headboard x 1 Footboard x 1 Side Rails x 2

Slats x 16 Wide Slats x 16

Drawer Runner Base x 2 Drawer Centre Support x 1

Drawer Sides x 4 Drawer Fronts x 2 Drawer Backs x 2

Drawer Bottoms x 2

Centre Rail x 1

Wooden Legs x 4

Upholstered Drawer Panels x 2 Drawer Bottom Supports x 6

12 3

456

7 8 9

10 11 12

13 14 15

Metal Stopper x 4

Parts

Metal plates x 2

4/10

Step One

Step Two

Attach M8 Spring Washer (G) and M8 x 16mm Bolts (H) into the metal fixings onto both Drawer Runner Base (8)

(only for the top side). Insert the Drawer Runner Base (8) inside the bed frame as shown in step 2. Next, attach the

M8 Spring Washer (G) and M8 x 16mm Bolts (H) into the bottom side of metal fixing on the bottom supports.

Loosely tighten the bolts using M5 Allen Key (B).

M8 x 16mm

Bolt x 8

M8 Spring

Washer x 8

M8 x 16mm

Bolt (H)

M8 Spring Washer

(G)

STEP 1

M5 Allen Key x 1

G. H.

BRACKET

SIDE RAIL

BRACKET

SIDE RAIL

Place metal bracket on Side Rails (3) over pre-inserted bolts in Headboard (1) and Footboard (2) and hand-tighten

to loosely secure parts together. Do not tighten bolts with M5 Allen Key (B) until you have inserted the Centre Rail

in Step Four.

LOOSELY SECURE PARTS

TOGETHER IN ORDER FOR

CENTRE RAIL TO FIT IN

STEP FOUR

LOOSELY SECURE PARTS

TOGETHER IN ORDER FOR

CENTRE RAIL TO FIT IN

STEP FOUR

Fig 2

M5 Allen Key

(B)

STEP 2

5/10

Screw

4 x 50mm x 4

Step Three

Step Four

Attach Drawer Centre Support (9) to Drawer Runner Base (8) and secure into place using Screws 4 x 50mm (K) as

shown in the diagram below.

M4 Allen Key (A)

M6 x 25mm (I)

M4 Allen Key x 1 M6 x 25mm Bolt x 2

A. I.

AFTER INSERTING CENTRE

RAIL, TIGHTEN ALL FIXINGS

FULLY INCLUDING BOLTS

AT SIDE RAILS (FROM

STEP ONE)

Cross head

Screw Driver

Screw 4 x 50mm (K)

Insert Centre Rail (6) into the brackets on the Headboard (1) and Footboard (2). Push down fully and secure in

place using M6 x 25mm Bolts (I). Tighten using M4 Allen Key (A). You can now tighten the bolts with M5 Allen Key (B)

at the Side Rails from Step One so all fastenings are now tightened.

6/10

Step Five

Step Six

Insert the Front Legs (7)x2 into the pre-drilled holes on the underside of the Headboard (1) and twist to secure, as

shown in the diagram below.

Legs x 2

M8 Nut x 2

M13 Spanner x 1

Screw

3.5 x 30mm x 2 M6 X 25mm Bolt x 4

Legs x 2

16.

Metal plates x 2

M8 Spring

Washer x 2

M4 Allen Key x 1

L.M.N.

Attach the Metal Plate (16) to the bottom of the Footboard (2) using Bolts M6 X 25mm (I) x2. Do not tighten the bolts

until you make adjustment for the screw hole at the Side Rail (3). Insert Wooden Leg (7) into the bottom of the

Metal Plate (16) using M8 Spring Washer (G) and M8 Nut (M). Hold the M8 Nut (M) using M13 Spanner (N) and twist

the Wooden Leg (7) to secure in place. Repeat for other leg.

G. 7.

For Footboard Only

M6 x 25mm (I)

M4 (A)

M6 x 25mm (I)

M4 (A)

M6 x 25mm (I)

3.5 x 30mm (L)

M13 Spanner (N)

M8 Nut (M)

M8 Spring

Washer (G)

STEP 1

STEP 2

AFTER INSERTING BOLT M6 x 25MM,

MAKE ADJUSTMENT FOR SCREW HOLE,

THEN INSERT THE SCREW 3.5 X 30MM.

TIGHTEN THE BOLT M6 x 25MM

FIXINGS FULLY.

TWIST WOODEN LEG ONLY

WITHOUT MOVING THE M8 NUT,

SPRING WASHER AND SPANNER

Twist the wooden leg

Yellow sticker

face down

7/10

Step Eight

Attach Upholstered Front Panel (14) to drawer and tighten together using M6 x 40mm Bolt (J). Tighten with

M4 Allen Key (A). Slide drawers into both sides of the bed frame. The bed is now ready for use.

M6 x 40mm x 8

M4 Allen Key x 1

A. J.

Step Seven

3.5 x 30mm

x 40

Cross Head

Screw Driver

To construct the drawers, fix Drawer Front (11) with one end of each Drawer Bottom Support (15) using

Screws 3.5 x 30mm (L) as shown in Fig.1, then fix the Drawer Sides (10) to the Drawer Front (11). Next,

insert Drawer Bottom (13) and then fix Drawer Back (12) using Screws 3.5 x 30mm (L) as shown in Fig.2.

Finally, secure the other end of the Drawer Bottom Support (15) to the other side of the drawer and tighten

using a cross head screw driver.

(x2)

Fig. 1 Fig. 2 Fig. 3

8/10

Step Nine

Attach Metal Stopper (16) to the Drawer Runner Base (8) using Screw 4 x 18mm (O).

Screw 4 x 18

x 8

16.O.

Metal Stopper x 4

2 Lines

Normal slats

2 Lines

Normal slat

2 Lines

Wide slats

2 Lines

Wide slats

2 Lines

Normal slats

2 Lines

Normal slats

4 Lines

Wide slats

ZONE 2

ZONE 1

ZONE 5

ZONE 7

ZONE 6

ZONE 4

ZONE 3

Diagram 1

9/10

Step Eleven

The bed is now ready for use.

(x8)

Side Caps x 16

Wide Centre Caps

x 8

Wide Side Caps

x 16

Wide Slats x 16

Slats x 16

With the curved side facing upwards, insert 2 slats into a centre cap then into 2 side caps on either

end(x16). (Please note the Wide Slats (5) must be inserted with the Wide Centre Caps (E) and Wide

Side Caps (F)). Repeat this process for all slats.

Note: Please see the Diagram 1 below to arrange the slat with the correct system).

Centre Caps x 8

Step Ten

10/10

Care and Maintenance

Safety Instructions

If you require any additional information or have any issues with this product please call

the John Lewis Helpline on 01244 689949 or email [email protected]

John Lewis Partnership 171 Victoria Street, London, SW1E 5NN.

www.johnlewis.com

Never drag furniture when moving it. Always lift it.

Periodically check all fixings to ensure none have come loose and re-tighten where necessary.

Please take care when handling or moving the furniture as careless handling may cause damage or injury.

Furniture can be dangerous if incorrectly installed. Any assembly should be carried out by a competent

adult.

No liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.

During assembly, children should be kept away from the product due to possible risk of injury.

Do not use this item if any components are missing or damaged.

It is recommended that care is taken when moving heavy objects to a new location to avoid

personal injury or damage to the furniture. Please be careful to retain all fittings when doing this.

This Rouen Storage Bed should be cleaned using a soft damp cloth and dried immediately.

Do not use a very wet cloth or allow any liquid contact for a long period of time as this can permanently

damage the surface.

Do not use detergents and do not rub as this can cause permanent damage.

Always protect your bed from direct sunlight as this may accelerate the natural ongoing discolouration

process.

Bolts holding together the bed frame should be tightened regularly.

Please retain this information leaflet for future reference.

This product complies with BS EN 1725:1998.

Inhaltsverzeichnis

Andere John Lewis Inneneinrichtung Handbücher

John Lewis

John Lewis Dara 803 51101 Bedienungsanleitung

John Lewis

John Lewis FOUR TIER SHOE RACK Bedienungsanleitung

John Lewis

John Lewis House Bedienungsanleitung

John Lewis

John Lewis Grace Bedienungsanleitung

John Lewis

John Lewis Contour 836 12501 Bedienungsanleitung

John Lewis

John Lewis Grace Bed Bedienungsanleitung

John Lewis

John Lewis Wardrobe 80313215 Bedienungsanleitung

John Lewis

John Lewis Chunky Weave 820 88903 Bedienungsanleitung

John Lewis

John Lewis Beech Bedienungsanleitung

John Lewis

John Lewis ABACUS corner desk Bedienungsanleitung

John Lewis

John Lewis 803/40901 Bedienungsanleitung

John Lewis

John Lewis Mia 810/84103 Bedienungsanleitung

John Lewis

John Lewis Resto Bedstead Bedienungsanleitung

John Lewis

John Lewis Medan double bed 803 51803 Bedienungsanleitung

John Lewis

John Lewis MIRA 836 23502 Bedienungsanleitung

John Lewis

John Lewis 82006901 Bedienungsanleitung

John Lewis

John Lewis 81621301 Bedienungsanleitung

John Lewis

John Lewis 57040107 Bedienungsanleitung

John Lewis

John Lewis Charlotte Bed 80371707 Bedienungsanleitung

John Lewis

John Lewis Calia 836 03001 Bedienungsanleitung

John Lewis

John Lewis Calia Bedstead 135 Cm Bedienungsanleitung

John Lewis

John Lewis Asuka Bedienungsanleitung

John Lewis

John Lewis Portman Bedstead Bedienungsanleitung

John Lewis

John Lewis Showwood Bed Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung