Johnson Controls Tyco PowerSeries Pro HS3032 Bedienungsanleitung

intrusion

To download the full manual and register your product, please visit:

www.DSC.com/m/29010119 or scan the QR code to the right.

HS3032 / HS3128 / HS3248 USER GUIDE UK

WARNING: This manual contains information on limitations regarding product use and

function and information on the limitations as to liability of the manufacturer. The entire

manual should be carefully read.

Table of Contents

1.0 Quick Reference 3

2.0 Understanding Your Keypad 5

2.1 Panel and keypad models 5

3.0 The PowerSeries Pro Security System 6

3.1 General System Operation 6

3.2 Testing the System 6

3.3 Performing a Keypad and Siren test 7

3.4 Monitoring 7

4.0 Setting the Alarm System 8

4.1 Alarm System Arming/Setting Methods 8

4.2 Setting the System (Infinite Exit Delay) 8

4.3 Away Setting the System with the Keypad 8

4.3.1 Setting the system in Away mode 8

4.3.2 Canceling the setting sequence 9

4.4 Setting the system in Stay mode 9

4.5 Canceling the setting sequence 10

4.5.1 Silent Exit Delay 10

4.6 Exit Delay Time Restart 10

4.7 Alarm Cancel Window 10

4.8 Using 2-way Wireless Keys and Proximity Tags 10

4.9 Setting the System with a 2-Way Wireless Key 11

4.10 Setting the System with a Proximity Tag 11

5.0 Alarm System Unsetting Methods 12

5.1 Unsetting the System 12

5.2 Unsetting the system with a keypad 12

5.3 Unsetting the system with a 2-way Wireless Key 12

5.4 Engineer Reset function 12

5.5 Activating the DLS Window setting 12

6.0 Emergency Keys 14

7.0 Access Code Types 15

7.0 Opening the Access Codes menu 16

7.0 Adding, Changing and Deleting Access Codes 16

7.1 Adding or changing user access codes 16

7.2 Burglary Verification 16

7.3 Swinger Shutdown 17

7.4 Call Waiting 17

7.5 Fire Alarm Verification 17

7.6 System Lockout Due To Invalid Attempts 17

7.7 User Labels 17

8.0 Regular Maintenance and Troubleshooting 20

8.1 Cleaning 20

8.0 Troubleshooting 21

9.0 Access Codes 28

9.1 Sensor/Zone Information 29

10.0 Reference Sheets 30

10.1 System Information 30

10.2 Service Contact Information 30

11.0 UK Compliance Statement 31

12.0 EN Compliance 32

12.1 EUROPEAN CE COMPLIANCE STATEMENT 32

13.0 EULA 33

- 2 -

Chapter 1.0 Quick Reference

1.0 Quick Reference

The PowerSeries Pro Alarm System uses shortcut keys to access options or features on all

models of keypads. When using an LCD keypad, the PowerSeries Pro alarm system

additionally uses a menu based navigation system. Use the scroll keys to view the list of options

contained within the current menu.

For detailed information about the PowerSeries Pro alarm system, refer to the full online

manual, which can be accessed from the DSC website.

Status Lights

Function

Keys

Emergency

Keys

Ready - Indicates system normal. Must be on to set the system. All

zones must be secured or bypassed and the system unset for this light

to activate. Stay Set Fire Alarm

Set- Indicates the system is set. If the Ready light and the Set light are

both on, an Exit Delay is in progress.

Away Set Medical

Alarm

Trouble - On indicates a system malfunction or tamper. Flashing

indicates that the keypad has a low battery condition. Follow the

instructions displayed or enter [*][2] to view trouble. Correcting the

trouble turns off the indicator.

Chime

Panic Alarm

AC Power - Indicates AC Power is present. The AC Power light turns

off when AC is absent.

Reset

Quick Exit

Action Press

Setting and Unsetting

Away Set for 2 seconds + [Access Code†]

Stay Set for 2 seconds + [Access Code†]

Night Set When set in stay mode [*][1] + [Access Code†]

Unset [Access Code]

No-Entry Setting [*][9] + [Access Code†]

Quick Set/Quick Exit [*][0]

Cancel Setting Sequence [Access Code]

Bypassing - All bypass commands begin with [*][1] + [Access Code†]

Bypass Individual Zones [3 Digit Zone #]

Bypass All Open Zones [9][9][8]

Recall Last Bypass [9][9][9]

Clear Bypass

[0][0][0] OR [Scroll] Bypass Options + [*] + Clear Bypasses + [*]

Program Bypass Group

[3 digit zone #s] + [9][9][5] OR [3 digit zone #s] + Bypass Options

+ [*] + Prg Bypass Group + [*]

- 3 -

Chapter 1.0 Quick Reference

Action Press

Load Bypass Group

[9][9][1] OR Bypass Options + [*] + [Scroll] Bypass Group + [*]

Common Functions

Set Time and Date [*][6] [Master Code] + [0][1]

Turn Chime ON/OFF [*][4] + [Access Code†] OR

Change Brightness

[*][6] [Master Code] + [1][2] +

Change Contrast

[*][6] [Master Code] + [1][3] +

Buzzer Volume

[*][6] + [Master Code] + [1][4] +

Add/Delete User [*][5] + [Master Code] + [Access Code] + 1

Reset Smoke Detectors OR [*][7][2]

View Troubles

[*][2] + [Access Code†] +

View Alarms

[*][3] + [Access Code†] +

Perform System Test

[*][6] + [Master Code] + [0][4] +

† If configured by the installer.

- 4 -

Chapter 2.0 Understanding Your Keypad

2.0 Understanding Your Keypad

The PowerSeries Pro Alarm System supports a variety of wireless and hardwired keypads.

2.1 Panel and keypad models

This guide contains information for the following PowerSeries Pro panels:

•HS3032

•HS3228

•HS3248

These panels are compatible with the keypad models in the following table:

Table 1: Keypad models

Model Description

HS2LCDPRO Alphanumeric LCD keypad with proximity tag support

HS2LCDRFPRO8 Alphanumeric LCD keypad with wireless receiver and proximity tag

support

HS2LCDWFPRO8 Wireless alphanumeric LCD keypad with proximity tag support

HS2LCDWFVPRO8 Wireless alphanumeric LCD keypad with proximity tag support and

voice prompt

HS2TCHPRO Touch screen keypad with proximity support with a white enclosure

HS2TCHPROBLK Touch screen keypad with proximity support with a black enclosure

Note: This guide contains information for the HS2LCDPRO, HS2LCDRFPRO8, and the

HS2LCDWFVPRO8 keypad models. For information on the other keypad models, refer to the

PowerSeries Pro User Manual (29010102), and the PowerSeries Pro HS2TCHPRO /

HS2TCHPRO(BLK) User Manual (29010319).

- 5 -

Chapter 3.0 The PowerSeries Pro Security System

3.0 The PowerSeries Pro Security System

The PowerSeries Pro has been designed to provide the greatest possible flexibility and

convenience. Read this manual carefully and have the installer provide instructions on how to

operate the system and which features have been implemented. All users of this system

should be equally instructed in its use.

Fill out the "System Information" section with zone information and access codes and store this

manual in a safe place for future reference.

3.1 General System Operation

This security system is made up of a PowerSeries Pro control panel, one or more keypads and

various sensors and detectors. The metal cabinet contains the system electronics and standby

battery. The keypad is used to send commands to the system and to display the current

system status. The keypad(s) are mounted in a convenient location inside the protected

premises close to the entry/exit door(s). The security system has several zones of area

protection, each connected to one or more sensors (motion detectors, glassbreak detectors,

door contacts, etc.).

Note: Only the installer or service professional shall have access to the control panel.

3.2 Testing the System

Tests all system keypad LEDs, keypad sounders, bells and/or sirens. To ensure the system

continues to function as intended, test your system weekly.

IMPORTANT: Should the system fail to function properly contact the installation company.

IMPORTANT: All smoke detectors must be tested by the smoke detector installer once per

year.

- 6 -

Chapter 3.0 The PowerSeries Pro Security System

3.3 Performing a Keypad and Siren test

LCD Display

1. Press [*][6] and enter the [Master Code] to access User

Functions.

Press (*) for <>

User Functions

2. Press [04] or use the scroll keys to navigate to System Test and

press [*]. All keypad sounders, bells/sirens and keypad LEDs

activate for two seconds.

Press (*) for <>

System Test

3. Press [#] to return to the Ready state.

3.4 Monitoring

This system is capable of transmitting alarms, troubles and emergency information. If an alarm

is initiated by mistake, immediately call the central station to prevent an unnecessary response.

Note: The monitoring function must be enabled by the installer before it is operational.

Note: Consult with the installer to determine if the system is configured with a communicator

delay. A communicator delay will prevent a report to the central station if the control panel is

unset within 30-45 seconds after an intrusion alarm is triggered. Note that fire-type alarms are

normally reported without a delay.

Note: Ensure the installer verifies that the system is compatible with the Central Station

Receiver format at yearly intervals.

- 7 -

Chapter 4.0 Setting the Alarm System

4.0 Setting the Alarm System

4.1 Alarm System Arming/Setting Methods

The PowerSeries Pro system is capable of completing the full alarm system setting procedure

using one of the following methods:

•Push button switch mounted outside the supervised premises; or

•Protective switch (i.e., door contact) fitted to the final exit door of the alarmed premises or

area.

The setting procedure is a two-stage process that consists of initiating the alarm setting

procedure within the supervised premises (e.g., using a proximity tag or user code) followed

by completion of setting by one of the two methods mentioned above. Please check with the

installer which method has been enabled for your system.

4.2 Setting the System (Infinite Exit Delay)

In an attempt to reduce false alarms, your system is designed to send notification of an

improper exit when setting the system. When using the Push to Set, or Final Door Set feature,

attempting to set the system will start an infinite exit delay. The keypad will sound a beep once

per second. When you have opened and closed the final exit door, or after pressing the Push

to Set button, the exit delay will be reduced to the programmed value, which is typically 10

seconds, after which the alarm panel is set. When this time expires, the system checks for

detectors that may be open. If any of these are open, the panel will cancel the setting. If this

occurs, re-enter the premises, check the system, close any open windows or doors, and then

attempt to set again.

Note: This feature must be enabled by the installer.

4.3 Away Setting the System with the Keypad

Away mode activates the complete alarm system by:

•Setting all perimeter sensors.

•Setting all interior sensors.

4.3.1 Setting the system in Away mode

To set the system in Away mode, complete the following steps:

1. Ensure that you close all windows and doors.

2. Ensure that the Ready indicator is on.

Note: You cannot arm the system until the Ready indicator is on.

3. Choose one of the following options:

•To quickly set the system, press [*][0].

•To set the system using the Away key, press and hold the Away key for 2 seconds. If it is

necessary, enter an access code, or present a proximity tag to the keypad reader.

If the system bypasses a zone, a warning appears on the keypad.

- 8 -

Chapter 4.0 Setting the Alarm System

Note: For European installations (EN50131 certified), you can not set the system without a

valid user code. If you do not have a valid user code, do not attempt to initiate the setting

sequence for the alarm system.

After you initiate the setting sequence, the system completes the following actions:

•The Set indicator turns on.

•The Ready indicator remains lit.

•The Exit Delay time begins to count down.

•The keypad beeps six times, and continues to beep once each second. In the final 10

seconds, the system beeps rapidly.

Note: For European installations (EN50131 certified), the Armed indicator turns on only after

the Exit Delay.

When the Exit Delay timer expires, the system is set and the following actions occur:

•The Ready indicator turns off.

•The Set indicator remains on.

•The keypad stops sounding.

Note: The installer configures the Exit Delay timer in accordance with the North American,

Canadian, and European certification requirements (UL, ULC, and EN50131).

4.3.2 Canceling the setting sequence

To cancel the setting sequence, complete the following step:

•Enter your access code, or present a proximity tag to the keypad reader.

4.4 Setting the system in Stay mode

Stay mode partially activates the alarm system by Setting all perimeter sensors, and bypassing

all interior sensors.

Note: For European installations (EN50131 certified), the Keypad Blanking feature activates

after 30 seconds. You can see the status of the alarm system only after you enter a valid user

code.

To set the system in Stay mode, complete the following steps:

1. Ensure that you close all windows and doors.

2. Ensure that the Ready indicator is on.

3. Press and hold the Stay key for 2 seconds. If it is necessary, enter an access code, or

present a proximity tag to the keypad reader.

Note: Do not leave the premises.

If the system bypasses a zone, a warning appears on the keypad.

After you initiate the setting sequence, the system completes the following actions:

•The Armed indicator turns on.

•The Ready indicator remains lit.

•The Exit Delay timer begins counting down.

- 9 -

Chapter 4.0 Setting the Alarm System

Note: For European installations (EN50131 certified), the Armed indicator turns on only after

the Exit Delay.

When the Exit Delay timer expires, the system is set and the following actions occur:

•The Ready indicator remains lit.

•The Armed indicator remains on.

•The keypad stops sounding.

4.5 Canceling the setting sequence

To cancel the setting sequence, complete the following step:

•Enter your access code, or present a proximity tag to the keypad reader.

4.5.1 Silent Exit Delay

If you arm the system using the Stay key or the No Arming method [*] [9]:

•The warning beep is silenced

•The exit time doubles only for that exit period (CP-01 versions only).

Note: For non CP-01 versions, Standard Exit Time is used.

4.6 Exit Delay Time Restart

The control panel provides an option where, if a entry/exit zone is tripped a second time prior

to the end of the exit delay, the exit delay time restarts. The exit delay timer can only be

restarted once.

Note: Infinite Exit Delay is also available, so that the installer does not need to program the

timer. Rather, the installer will enable operation, based on British Standards (BS8243).

4.7 Alarm Cancel Window

The control panel provides a period of time in which the user can cancel the alarm

transmission (minimum duration is 5 minutes). If the programmed alarm transmission delay

has expired, canceling an alarm sends a message to the monitoring station. Upon a successful

transmission of the cancellation message, the keypad beeps 6 times. Must be enabled and

configured by the installer.

4.8 Using 2-way Wireless Keys and Proximity Tags

The 2-way wireless key allows users the ability to readily set/unset their system, and to call for

help. For information on enrolling wireless keys see "User Labels".

- 10 -

Andere Handbücher für Tyco PowerSeries Pro HS3032

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Johnson Controls Sicherheitssystem Handbücher

Johnson Controls

Johnson Controls Tyco PowerSeries Pro HS3032 Bedienungsanleitung

Johnson Controls

Johnson Controls IFI-WS Bedienungsanleitung

Johnson Controls

Johnson Controls Qolsys IQ Remote PowerG Bedienungsanleitung

Johnson Controls

Johnson Controls IQ Panel 4 Bedienungsanleitung

Johnson Controls

Johnson Controls Intelligent Fire Integrator NION-16C48M Bedienungsanleitung

Johnson Controls

Johnson Controls Qolsys IQ Remote PowerG Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Johnson Controls

Johnson Controls tyco RAPID RESPONSE RCP-1 Bedienungsanleitung

Johnson Controls

Johnson Controls METASYS PS12ADA Series Bedienungsanleitung

Johnson Controls

Johnson Controls Tyco PowerSeries Pro HS3032 Bedienungsanleitung

Johnson Controls

Johnson Controls P2000 Handbuch

Johnson Controls

Johnson Controls Tyco WS900 UL Bedienungsanleitung

Johnson Controls

Johnson Controls IFC-1010 Handbuch

Johnson Controls

Johnson Controls Tyco PowerSeries Pro Bedienungsanleitung

Johnson Controls

Johnson Controls P2000 Bedienungsanleitung

Johnson Controls

Johnson Controls P2000 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung

DSC

DSC PC 4010 Betriebsanleitung