JONATHAN Y JYL6015 Bedienungsanleitung

WARNING

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.

WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT BREAKER

BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS

DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe

the surface of the fixture.

To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the

fuse at the fuse box. Next, use a dry or slighly damperned clean clorth (use clean water, never a solvent) to wipe the

interior surface of the fixture.

Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.

Model#: JYL6015

Product Dimensions: 22"LX4.25"W X6.5"H

Note: 2 Assembly Options

Option 1：Portable lamp with plug

Option 2：Hard wired

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

* Please make sure that you have all parts indicated before you begin assembly of this item.

* This item should be assembled on a soft surface to prevent scratching the finish during assembly.

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use

and installation.

* The external flexible cable or cord of this lamp cannot be replaced. If the cord is damaged, the lamp shall be destroyed.

Part List and Hardware List

1/3

Option 1: Portable lamp with plug

Step 1

Ste

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents

list and

hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 20 minutes.

1. Three tubes (J) were locked on the NIPPLE of IAMP BODY (F) from the bottom.

2. Place the MOUNTING PLATE(B) on the wall and mark the wall according to the MOUNTING hole and place

2 PLASTIC ANCHORS(C) on the wall.

ENJOY YOUR LAMP

3. Use 2PCS TAPPING SCREW (C) to mount the MOUNTING PLATE (B) on PLASTIC ANCHORS (A).

Attach the IAMP BODY (F) to the MOUNTING PLATE (B) and secure it with the MOUNTING SCREW (E).

1. Place the shade (G) on the lamp body (F), and then lock the shade (G) with the socket ring (H) .

2. Lock the bulb (I) to the socket .

3.Move handle to adjust the direction of lamp shade (G).

PLEASE USE TYPE"A" BULB MAX 25-WATT OR LED BULB MAX 5-WATT, THERE IS 1PC LED

4-WATT BULB IN THE BOX.

ABCD

2/3

Step 1

1.Cut off the plug with scissors, leaving the exposed wire 8" in length.

Step 2

Grounding Instructions:

Ste

PREPARATION

Option 2: Hard wired

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents

list and

hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembl

Time: 20 minutes.

2. Use tools to loosen up the Nipple（J）and Decorative nut（K）from the iamp body.

3. Insert Plastic cover（L）into iamp body hole.

1. Lock the mounting plate (B) on the outlet box with the Out let box screws (C).

2.Connect the power cord of the lamp to the positive and negative poles in the household power box.

Connect, Neutral, White Outlet Supply Wire to:

Black White

* Parallel Cord (round & smooth) * Parallel Cord (square & ridged)

Note: Cuting the cord so that they are at least 6 inches

(152.4mm) long within an outlet box and extend max. 2.4m long

measured from the point where the cord emerges from the

body of the lamp.

b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around green

grounding screw on mounting bracket. Tighten ground screw.

3. Connect the lamp body (F) to the mounting plate (B) and lock it with Mounting screw (E) .

1. Place the shade (G) on the lamp body (F), and then lock the shade (G) with the socket ring (H) .

2. Lock the bulb (I) to the socket .

3. Move handle to adjust shade (G) direction left and right.

Clear, Brown, Gold or Black without Tracer (colored stripes) Clear, Brown, Gold or Black with Tracer (colored stripes)

Insulated Wire (not green) with copper metal conductor Insulated Wire (not green) with Silver metal conductor.

*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped and

ridged and the hot wire will be round in shape and smooth.（See Illustration on left.）

a) For installation in the United States: Wrap ground wire from outlet box around green ground

screw(C) on mounting bracket, no less than 2" from wire end. Tighten ground screw. If fixture is

supplied with a ground wire, connect to outlet ground wire with a wire connector.

Connect, Hot, Black or Red Outlet Supply Wire to:

Step

1



ABC

3/3

Inhaltsverzeichnis

Andere JONATHAN Y Wohnraumbeleuchtung Handbücher

JONATHAN Y

JONATHAN Y JYL7579A Bedienungsanleitung

JONATHAN Y

JONATHAN Y JYL1080A Bedienungsanleitung

JONATHAN Y

JONATHAN Y JYL5046A Bedienungsanleitung

JONATHAN Y

JONATHAN Y JYL1038A Bedienungsanleitung

JONATHAN Y

JONATHAN Y JYL2056A Bedienungsanleitung

JONATHAN Y

JONATHAN Y JYL6603A Bedienungsanleitung

JONATHAN Y

JONATHAN Y JYL2031A Bedienungsanleitung

JONATHAN Y

JONATHAN Y JYL3018A-B Bedienungsanleitung

JONATHAN Y

JONATHAN Y JYL1097A Bedienungsanleitung

JONATHAN Y

JONATHAN Y JYL5034A Bedienungsanleitung

JONATHAN Y

JONATHAN Y JYL2054A Bedienungsanleitung

JONATHAN Y

JONATHAN Y JYL1040A Bedienungsanleitung

JONATHAN Y

JONATHAN Y LIT3014 Bedienungsanleitung

JONATHAN Y

JONATHAN Y JYL5020A Bedienungsanleitung

JONATHAN Y

JONATHAN Y JYL4027C Bedienungsanleitung

JONATHAN Y

JONATHAN Y JYL6116A Bedienungsanleitung

JONATHAN Y

JONATHAN Y Marfa JYL7563A Bedienungsanleitung

JONATHAN Y

JONATHAN Y JYL9065 A Bedienungsanleitung

JONATHAN Y

JONATHAN Y JYL3022A Bedienungsanleitung

JONATHAN Y

JONATHAN Y JYL5005A Bedienungsanleitung

JONATHAN Y

JONATHAN Y JYL7533A Bedienungsanleitung

JONATHAN Y

JONATHAN Y JYL1092A Bedienungsanleitung

JONATHAN Y

JONATHAN Y JYL5025A Bedienungsanleitung

JONATHAN Y

JONATHAN Y JYL1052A Bedienungsanleitung

Beliebte Wohnraumbeleuchtung Handbücher anderer Marken

Philips

Philips Ledino 31606/11/16 Bedienungsanleitung

Salus

Salus UG600 Bedienungsanleitung

Safavieh Lighting

Safavieh Lighting CANDRI TBL4427A Bedienungsanleitung

Hunter

Hunter Bullet Spotlight Kit Gebrauchsanweisung

Philips

Philips Ledino 16811/87/16 Bedienungsanleitung

Philips

Philips 405441213 Bedienungsanleitung

Philips

Philips Halogen Light Bedienungsanleitung

Pentair

Pentair GLOBRITE Bedienungsanleitung

Philips

Philips 55592-30-16 Bedienungsanleitung

Livoo

Livoo Night light Bedienungsanleitung

Schwaiger

Schwaiger NFL45 Bedienungsanleitung

FRITZ HANSEN

FRITZ HANSEN AQ01 PLUG-IN Bedienungsanleitung

MOOD

MOOD CORSIN JY-16 Bedienungsanleitung

Safavieh Lighting

Safavieh Lighting KREMP TBL4409A Bedienungsanleitung

XTRASUN

XTRASUN XTDEOKT1 Bedienungsanleitung

Inspire

Inspire Lana YF3306-M Wartungshandbuch

Triarch

Triarch Indoor Lighting 31550/1 Bedienungsanleitung

Malmbergs

Malmbergs Milos Bedienungsanleitung