Josef Kihlberg F53PN Bedienungsanleitung
02.15
F53PN
Pneumatic industrial stapler
Pneumatisk planhäftare
Pneumatische flachhefter
Agrafeuses
From series no 1500504
Från serienummer 1500504
Ab Serie-Nr. 1500504
A partir du no de série 1500504
ENGLISH 3
SVENSKA 14
DEUTSCH 26
FRANÇAIS 38
Before using the
bottom stapler, read the
operating instructions
carefully.
Läs igenom bruks-
anvisningen noga innan
du använder maskinen.
Vor dem Gebrauch der
Bodenheftmaschine
die Betriebsanleitung
aufmerksam lesen.
Avant l’utilisation de
l’appareil, consultez
soigneusement le
mode d’emploi.
OPERATING INSTRUCTIONS Translation of original manual
BRUKSANVISNING Original bruksanvisning
BETRIEBSANLEITUNG Übersetzung der Originalbetriebsanleitung
MODE D‘EMPLOI Traduction du mode d’emploi original
KUDA PACKAGING
www.kuda-packaging.com
SERVIS A NAHRADNÍ DÍLY
+420 607 237 237
www.kuda-packaging.com
202.15
Josef Kihlberg F53PN
1TECHNICAL DATA
TABLE OF CONTENTS
Weight 42 kg (92,6 lbs)
Dimensions Length 920 mm (36.2“)
Width 750 mm (29.5“)
Height 1350 mm (53.1“)
Magazine capacity 400 staples
Staple leg length 9–12 mm (3/8“ - 1/2“)
Throat depth 400 mm (15.7“)
Free anvil height 1000 mm (39.4“)
Max. air pressure 7 bar (100 psi)
Recommended
working air pressure 5 bar (72 psi)
Air consumption
per driving operation at
6 bar operating pressure 2,0 litres
A-weighted single-event
emission sound pressure
level at work station 84 dB
A-weighted sound
energy level 91 dB
FASTENERS
Staple JK53-09 (3/8“) Art.No 400130
Staple JK53-12 (1/2“) Art.No 400132
Page
1 Technical data 2
2 General information 3
2.1 Information on environmental protection 3
3 Safety instructions 4
4 Description 5
4.1 Design 5
4.2 Function 5
5 Initial operation 6
5.1 Installation 6
5.2 Compressed air connection 6
6 Operating instructions 7
6.1 Loading the bottom stapler 7
6.2 Operating the bottom stapler 8
6.3 Control the clinch 9
7 Preventive and corrective maintenance 10
7.1 Lubrication 10
7.2 Cleaning the bottom stapler 10
7.3 Removing jammed staples 10
7.4 Adjustment stapling head bearing 11
7.5 Adjustment staple clinch 11
7.6 Replace stapling head 12
7.7 Replace driver blade or return springs 12
7.8 Replace feed spring or pusher 12
8 Trouble shooting 12
9 Spare parts kit 50
9 Parts list with recommended wear parts 51
Exploded drawing 52
10 Parts list - Head HH53 53
Exploded drawing 54
DECLARATION OF CONFORMITY
We take sole responsibility for declaring that the
industrial stapler F53PN, to which this declaration
refers, is in full compliance with the current require-
ments of the guidelines laid down by the council
on 17th May 2006 (2006/42/EG) “Machine
Guidelines“.
Complies with norms: ISO 12100:2010
SE-544 50 HJO, 26.02.2015
Production Manager:
Anders Pettersson
Agent for the publication of technical documentation:
Josef Kihlberg AB, Industrigatan 37B SE-544 50 HJO
KUDA PACKAGING
www.kuda-packaging.com
SERVIS A NAHRADNÍ DÍLY
+420 607 237 237
www.kuda-packaging.com
02.15 3
Josef Kihlberg F53PN
CAUTION!
Used where there is
danger to life and health.
WARNING!
Used for danger which
can cause material
damage.
NOTE!
Used for general infor-
mation and information
which if not followed can
cause faults in the
operating sequence.
2 GENERAL INFORMATION
These operating instructions are intended to simplify
familiarisation with the bottom stapler and the pos-
sibilities of application for the intended purpose. The
operating instructions contain important information
concerning the safe, proper and efcient use of the
bottom stapler. Observation of the information will help
to avoid danger, reduce repairs and stoppages and
increase the reliability and service life of the bottom
stapler.
The operating instructions must always be available
at the place of operation of the bottom stapler. They
must be read and observed by all persons concerned
with work on the bottom stapler. This work specically
includes operation, relling of operating material, fault
elimination and maintenance.
In addition to the operating instructions and the regu-
lations for accident prevention effective in the country
of use and place of application, the recognised tech-
nical regulations for safety and proper working must
also be observed.
2.1 INFORMATION ON ENVIRONMENTAL
PROTECTION
This industrial stapler is manufactured without any
physical or chemical substances which could be
dangerous to health. For disposal of all the parts, the
governmental instructions must be observed.
KUDA PACKAGING
www.kuda-packaging.com
SERVIS A NAHRADNÍ DÍLY
+420 607 237 237
www.kuda-packaging.com
402.15
Josef Kihlberg F53PN
Use for the intended purpose
The bottom stapler is intended for stapling corrugated
cardboard.
This bottom stapler was designed and manufactured
for safe handling during the stapling operation.
Possible misuse
The bottom stapler is designed to be used only with
corrugated cardboard.
Servicing
The following maintenance work must be carried out
at regular intervals, varying with working conditions
and workload:
– daily check of compressed air pressure (4–6 bar).
– clean the bottom stapler regularly.
– check the condition of the bottom stapler at regular
intervals for defects or worn parts. Never use a
bottom stapler that has defective or worn parts
(for sevice work refer also to chapters 7.1 and
7.2).
3SAFETY INSTRUCTIONS
Inform yourself!
Read the operating
instructions carefully.
Protect yourself!
When operating the
bottom stapler, wear eye,
and/or ear protection.
Warning: Danger of
crushing!
Do not put your ngers
underneath the protector.
Do not remove protection
covers.
Warning:
Hazard!
Lay the compressed air
hose so that there is no
risk of tripping over it.
Do not exceed the air
pressure!
Do not exceed the re-
commended air pressure.
Use safety coupling!
For connecting the air
hose to the bottom
stapler, use only a safety
coupling.
Do not use a bottled air
or gas source!
Do not operate this
bottom stapler by using a
bottled air or gas source.
Original
JOSEF KIHLBERG
staples must be used
exclusively.
Original
JOSEF KIHLBERG
spare parts must be
used exclusively!
Not using original spare
parts will void the warran-
ty and the liability.
PD[
EDU
0
2
4
6810
12
14
16
.,+/%(5*
2ULJLQDO
KIHLBERG
Original
KUDA PACKAGING
www.kuda-packaging.com
SERVIS A NAHRADNÍ DÍLY
+420 607 237 237
www.kuda-packaging.com
02.15 5
Josef Kihlberg F53PN
4DESCRIPTION
4.2 FUNCTION
1. The pressure cylinder (Fig. 2/1) is activated by the
foot valve (Fig. 2/2).
2. When you press the foot valve the cylinder pres-
ses the stapling head (Fig.2/3) against the manu-
ally positioned carton.
3. The stapling head automatically pushes a staple
through the carton and the staple clinches against
the anvil.
4. When you release the foot valve the stapling
head is returned and the bottom stapler is ready
for next stapling.
4.1 DESIGN
1 Protector
2 Stapling head
3 Anvil
4 Safety latch
5 Foot valve
6 Pusher
7 Pneumatic cylinder
Fig. 1
Fig. 2
Warning: before stapling, ensure that
no part of your body is underneath
the protector.
3
1
5
4
7
6
3
2
1
2
KUDA PACKAGING
www.kuda-packaging.com
SERVIS A NAHRADNÍ DÍLY
+420 607 237 237
www.kuda-packaging.com
602.15
Josef Kihlberg F53PN
5INITIAL OPERATION
Fig. 3
5.1 INSTALLATION
The bottom stapler is delivered with the rear foot dis-
assambled. Assemble as following:
1. Remove the bottom stapler and the rear foot from
the carton.
2. Assemble the rear foot according to Fig. 3.
Tighten the two screws, (Fig. 3/1).
3. Place the bottom stapler on level, rm and clean-
working ground.
Lay the compressed air hose so that
there is no risk of tripping over it.
5.2 COMPRESSED AIR CONNECTION
Properly prepared compressed air is essen-
tial for troublefree operation of the bottom
stapler. This can only be ensured by a reliably functio-
ning maintenance unit, consisting of water separator,
pressure reducing valve with pressure gauge.
The internal diameter of the pipe should be at least
10 mm (3/8“).
The bottom stapler doesn´t need any lubrication.
Connect and adjust the air pressure to the lowest
possible, approx. 5,0 bars (72 psi), which clinch the
staples correctly.
Never exceed the maximum permitted air
pressure of 8 bar (110 psi). The maximum
supply pressure is 8 Bar (110 psi).
Low air pressure will give low mainte-
nance costs!
1
KUDA PACKAGING
www.kuda-packaging.com
SERVIS A NAHRADNÍ DÍLY
+420 607 237 237
www.kuda-packaging.com
02.15 7
Josef Kihlberg F53PN
6OPERATING INSTUCTIONS
Fig. 5
Fig. 6
6.1 LOADING THE BOTTOM STAPLER
– Always use Josef Kihlberg original staples
JK53-09 or JK53-12.
The correct type of staple is marked on the left side
of the magazine.
– Pull the pusher back and lift up the pusher into its
rear holder.
– Insert staple strips from the rear.
– Do not overload the magazine.
– Release the pusher.
Do not release the pusher directly from
the rear when the magazine is empty,
carefully guide it forward.
Fig. 4
KUDA PACKAGING
www.kuda-packaging.com
SERVIS A NAHRADNÍ DÍLY
+420 607 237 237
www.kuda-packaging.com
802.15
Josef Kihlberg F53PN
6.2 OPERATING THE BOTTOM STAPLER
– Load the stapling head with staples, (refer to chap-
ter 6.1). Ensure to use the right length of the staple
(refer to chapter 6.3).
– Place the carton underneath the protector.
– Activate the foot valve.
– The stapling head presses the carton and
automatically clinches the staple against the anvil.
Fig. 7
Fig. 8
Warning: before stapling, ensure that
no part of your body is underneath
the protector.
KUDA PACKAGING
www.kuda-packaging.com
SERVIS A NAHRADNÍ DÍLY
+420 607 237 237
www.kuda-packaging.com
02.15 9
Josef Kihlberg F53PN
6.3 CONTROL THE CLINCH
1Good clinch.
2 Leg length of the staple too long.
3 Leg length of staple too short.
Always use Josef Kihlberg original
staples: JK53-09 or JK53-12.
Fig. 9
– When you release the foot valve the stapling head
will return.
– Move the carton to the next staple position and ac-
tivate the foot valve again. Repeat until the correct
amount of staples have been used.
Fig. 10
To short
Correct
To long staple
Fel
To short
Correct
To long staple
Fel
To short
Correct
To long staple
Fel
3
2
1
KUDA PACKAGING
www.kuda-packaging.com
SERVIS A NAHRADNÍ DÍLY
+420 607 237 237
www.kuda-packaging.com
10 02.15
Josef Kihlberg F53PN
7PREVENTIVE AND CORRECTIVE MAINTENANCE
7.1 LUBRICATION
The linkage bearings are greased at delivery.
At regular intervals (monthly) lubricate them with oil.
Also lubricate the moving parts in the stapling head
with a few drops of oil.
7.2 CLEANING THE BOTTOM STAPLER
This bottom stapler does not require special servicing.
It only needs regular cleaning with a non-aggressive
(non-corrosive) cleaning agent. Do not remove any
parts for cleaning purposes!
Check the proper functioning of all safety
devices daily. Make especially sure that:
– the foot valve safety latch and the protector move
freely without binding or sticking.
– all screws and nuts are securely tightened.
Before carrying out any maintenance
tasks on the bottom stapler always
rst disconnect it from the air supply.
7.3 REMOVING JAMMED STAPLES
Before carrying out any maintenance
tasks on the bottom stapler always
rst disconnect it from the air supply.
Fig. 11
1
2 3
– Loosen the screw (Fig. 11/1). Squeeze the stapler
head and remove the staple trip block(11/3).
– Driving down the lower part of stapling head until
the defective staple exposed.
– Remove the defective staple.
– Replace the driver (16/5) if it is worn.
– Assemble in reverse order.
KUDA PACKAGING
www.kuda-packaging.com
SERVIS A NAHRADNÍ DÍLY
+420 607 237 237
www.kuda-packaging.com
Andere Handbücher für F53PN
1
Inhaltsverzeichnis
Sprachen:
Andere Josef Kihlberg Werkzeuge Handbücher
Josef Kihlberg
Josef Kihlberg a.560PN Bedienungsanleitung
Josef Kihlberg
Josef Kihlberg F53PN Bedienungsanleitung
Josef Kihlberg
Josef Kihlberg JK20-680 Bedienungsanleitung
Josef Kihlberg
Josef Kihlberg JK20A670 Bedienungsanleitung
Josef Kihlberg
Josef Kihlberg B561PN Bedienungsanleitung
Josef Kihlberg
Josef Kihlberg JK20V779L Bedienungsanleitung
Josef Kihlberg
Josef Kihlberg JK20-690 Bedienungsanleitung
Josef Kihlberg
Josef Kihlberg c.561PN Bedienungsanleitung
Josef Kihlberg
Josef Kihlberg F560PN Bedienungsanleitung
Josef Kihlberg
Josef Kihlberg JK35T590 Bedienungsanleitung
Josef Kihlberg
Josef Kihlberg JK20-670 Bedienungsanleitung
Josef Kihlberg
Josef Kihlberg JK20A680L Bedienungsanleitung
Josef Kihlberg
Josef Kihlberg JK20V779L22 Bedienungsanleitung
Josef Kihlberg
Josef Kihlberg JK20A670L Bedienungsanleitung
Josef Kihlberg
Josef Kihlberg 561-18PN Bedienungsanleitung
Josef Kihlberg
Josef Kihlberg JK20A680 Bedienungsanleitung
Josef Kihlberg
Josef Kihlberg JK35-590 Bedienungsanleitung
Josef Kihlberg
Josef Kihlberg JK10 Bedienungsanleitung
Josef Kihlberg
Josef Kihlberg R557PN Bedienungsanleitung
Josef Kihlberg
Josef Kihlberg JK35-590 Bedienungsanleitung
