Jung 2072 TSM Bedienungsanleitung

KNX Touch sensor module Standard

Ref.-no.: 207x TSM

Operating Instructions

Touch sensor module Standard

1-channel, 2-channel, 3-channel, 4-channel

1. Safety warnings

Attention: Electrical equipment must be installed and fitted by

qualified electricians only.

Failure to observe any of the installation instructions may cause

damage to the device and result in fire or other hazards.

2. System Information

This device is a product of the KNX/EIB system and complies with KNX

directives.

Detailed technical knowledge obtained in KNX/EIB training courses is a

prerequisite to proper understanding. The functionality of this device

depends on the software.

Detailed information on loadable software and attainable functionality as

well as the software itself can be obtained from the manufacturer’s

product database.

Planning, installation and commissioning of the unit is effected by means

of KNX-certified software.

An updated version of the product database and the technical

descriptions are available in the Internet at www.jung.de.

Stand: Jul-08 825 586 03

KNX Touch sensor module Standard

Ref.-no.: 207x TSM

3. Function

A touch sensor rocker is „divided“ into an upper and a lower half (FIG A)

each controlling a function such as switching, dimming, shutter, value

transmitter, recalling and storing of light-scenes. Each rocker is equipped

with a red status LED. A blue operation LED can serve as an orientation

light.

Function assignment:

upper half of rocker: On / Brighter / Up

upper half of rocker: Off / Darker / Down

Together with the wall-mounted radio-control transmitter, Art. no. 40 FW,

the device can also be used within the JUNG-Funk-Management system.

More details are set out in the technical documentation of the

wallmounted radio-control transmitter.

The device must be equipped with the corresponding touch sensor

module covers (must be ordered separately):

1 channel 2071 TSM 1 x FD..901 TSA..

2 channel 2072 TSM 2 x FD..902 TSA..

3 channel 2073 TSM 1 x FD..902 TSA.. und 2 x FD..904 TSA..

4 channel 2074 TSM 4 x FD..904 TSA..

1 2

3 4

1 2

1 1 2

KNX Touch sensor module Standard

Ref.-no.: 207x TSM

4. Installation

(1) (2) (3) (4) (5)

(1a)

•Connect the KNX/EIB bus coupler (1) to the KNX/ EIB bus and

install it in a flush-mounting box. If possible, program the physical

address beforehand into the coupler. (Within the JUNG Funk-

Management system: wall-mounted radio-control transmitter)

•Plug the touch sensor module (3) together with the decorative

frame (2) on the KNX/EIB bus coupler so that both devices are

connected via the user interface connector (1a).

•Fasten the touch sensor module with the plastic screws supplied (4)

to the KNX/EIB bus coupler. The screws are intended as a

protection against removal or theft. Tighten the plastic screws only

lightly (!). (Not possible with wall-mounted radiocontrol transmitter.)

IMPORTANT: Use only the plastic screws supplied with the device

for fastening! Metal screws are not permitted. The device may else

be irreparably damaged by electrostatic discharges! ·

•Fit the covers (5): Place the covers one by one on the touch sensor

module. The arrangement of the covers is shown in FIG A. Make

sure the cover fits properly (observe the marking TOP on the

inside) and snap it onto the device by a brief press.

4.1. Label covers

The covers with Art. no. FD..90x TSA NA.. can be equipped with labels.

Commercial-grade transparencies can be inscribed with the help of the

JUNG labelling software and inserted as labels into the covers.

KNX Touch sensor module Standard

Ref.-no.: 207x TSM

The JUNG labelling software is available in the Internet under the

following address:

www.jung-beschriftungsservice.de. Fit the label covers as shown in FIG

5. Technical data

Supply: 21 – 32 V DC via flush-mounted

BCU

Connection: 2 x 5-polig user interface connector

Power consumption: max. 150 mW plugged into

standard BCU

Type of protection: IP 20

Safety class: III

Ambient temperature: -5 °C … +45 °C

Storage/transport temp.: -25 °C … +70 °C

Technical specifications subject to change.

6. Guarantee

Our products are under guarantee within the scope of the statutory

provisions.

Please return the unit postage paid to our central service

department giving a brief description of the fault:

ALBRECHT JUNG GMBH & CO. KG

Service-Center

Kupferstr. 17-19

D-44532 Lünen

Service-Line: +(49) 23 55 . 80 65 51

Telefax: +(49) 23 55 . 80 61 65

E-Mail: [email protected]

General equipment

Service-Line: +(49) 23 55 . 80 65 55

Telefax: +(49) 23 55 . 80 62 55

E-Mail: [email protected]

KNX equipment

Service-Line: +(49) 23 55 . 80 65 56

Telefax: +(49) 23 55 . 80 62 55

E-Mail: [email protected]

The -Sign is a free trade sign addressed exclusively to the

authorities and does not include any warranty of any properties.

Andere Handbücher für 2072 TSM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Jung Steuereinheit Handbücher

Jung

Jung MSC 1000 KNX Bedienungsanleitung

Jung

Jung SM 1608 Bedienungsanleitung

Jung

Jung BT 1001 Series Bedienungsanleitung

Jung

Jung KNX 5091 TSM Bedienungsanleitung

Jung

Jung ZLL 5004M Series Bedienungsanleitung

Jung

Jung TK SV STG 60 REG Bedienungsanleitung

Jung

Jung KNX 2193 REG Bedienungsanleitung

Jung

Jung Smart Control 5 Bedienungsanleitung

Jung

Jung 5071 RF TSM Bedienungsanleitung

Jung

Jung KNX 42911 ST Bedienungsanleitung

Jung

Jung IPZ 1000 REG Bedienungsanleitung

Jung

Jung KNX RF Series Bedienungsanleitung

Jung

Jung 3091 TSM Bedienungsanleitung

Jung

Jung 2224 TSM Bedienungsanleitung

Jung

Jung 4091 TSM Bedienungsanleitung

Jung

Jung 4074 TSM Bedienungsanleitung

Jung

Jung WL 2200 REG Bedienungsanleitung

Jung

Jung 4008 TSM Montageanleitung

Jung

Jung 4074 TSM Bedienerhandbuch

Jung

Jung KNX 5071 TSM Bedienerhandbuch

Jung

Jung 5192KRMTSD Series Bedienerhandbuch

Jung

Jung KNX 2114 REG Bedienungsanleitung

Jung

Jung KNX 4192 TSM Bedienungsanleitung

Jung

Jung 30XX TSM Series Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung