Juniper JSA7800 Bedienungsanleitung

Quick Start Guide

How to Set Up Your JSA7800 Appliance

IN THIS GUIDE

Overview | 1

Package Contents | 2

Front Panel | 2

Back Panel | 3

Physical Specifications | 3

Initial Configuration Process | 3

Step 1: Powering On the Appliance | 4

Step 2: Connecting the Management Device | 5

Step 3: Configuring a JSA7800 Appliance | 6

Step 4: Verifying the Settings | 12

Powering Off the Appliance | 12

References | 13

Overview

Juniper Secure Analytics 7800 (JSA7800) is an enterprise and carrier-class appliance that provides a scalable network

security management solution for medium-sized companies up to large global organizations.

The JSA7800 appliance is a 2-rack-unit (2-U), rack-mountable chassis with AC power supplies (or optional DC power

supplies), sixteen hot-swappable hard drives, 128-GB memory, and two 10-Gigabit Ethernet SFP+ interfaces and four

1-Gigabit Ethernet interfaces.

Package Contents

Following are the items available in the package:

•JSA7800 appliance

•End-User License Agreement

•Warranty and Registration Information

•Quick-Start Guide

•Power cords

•Rail adapters

•DB9 adapter

•Rail kit

•Rail kit screws

Front Panel

g100043

Power button

Reset button

LEDs

Hard drives 0-15 Empty slots 16-23

LockFront bezel

Back Panel

g100044

Power

supplies

VGA

port

USB

ports

Dedicated

IPMI LAN port

COM

port

enp4s0f0eno3

eno1

eno4

eno2 enp4s0f1

10GbE SFP+

ports

Physical Specifications

3.5 in. x 17.2 in. x 24.8 in.Dimensions (H x W x D)

54.4 lbChassis weight

465 WAverage power

1699 BTU/hourMaximum thermal output

Full operation 1M to Front: 68.4 dBNoise level

Full operation 1M to Rear: 70.8 dB

Initial Configuration Process

g100045

Verifying the

Settings

Connecting the

Management

Device

Configuring a

JSA7800

Appliance

Powering On

the Device

Step 1: Powering On the Appliance

CAUTION: Before connecting the appliance to the power supply, attach an ESD strap to an ESD point

and place the other end of the strap around your bare wrist.

1. Plug the power cord into the AC receptacle on the rear panel. If your appliance contains two power supplies, plug a

power cord into each AC receptacle.

NOTE: Grounding for the appliances is provided through the power supply ground terminal. Ensure that

you connect the AC power supply module in the appliance to a grounded AC power outlet by using an AC

power cord (with the grounding pin) appropriate for your geographical location.

2. Plug the other end of the power cord into a wall socket.

3. Press the Power button on the front panel.

g000611

Power button

Reset button

LEDs

Power HDD

GLAN1

Information

GLAN2

Alert/Power fail

4. Note the following indications:

StateLED

Solid green— Indicates that the appliance is receiving power.Power

UnusedHard drive

StateLED

•LAN1— Indicates eno1 interface activity when blinking.

•LAN2— Indicates eno2 interface activity when blinking.

LAN

•Red (blinking)— Indicates a fan failure.

•Solid red— Indicates an overheat condition, which might be caused by cables obstructing

the airflow in the system or the ambient room temperature being too warm.

•Red (slowly blinking)— Indicates a power failure.

•Solid blue —Indicates UID function is activated.

Information

•Solid red— Indicates a power supply failure.

•Amber— Indicates that the appliance is operating normally.

Alert/Power Fail

Step 2: Connecting the Management Device

You can connect external devices using the ports on the back panel of the appliance.

1. If you use a laptop, connect the laptop to the DB-9 serial COM port on the back panel.

NOTE: When using a laptop to connect to the appliance, you must use a terminal program, such as

HyperTerminal, to connect to the appliance.

NOTE: If your laptop or PC does not have a DB-9 plug connector pin and you want to connect your laptop

or PC directly to the JSA7800 appliance, use a combination of a USB to DB-9 plug adapter and a DB-9 F/F

cable.

2. Select the appropriate COM port to use.

3. Configure the following COM port settings:

•Bits per second = 9600

•Stop bits =1

•Data bits = 8

•Parity = None

Step 3: Configuring a JSA7800 Appliance

1. At the console prompt, log in as root (default username). No password is required when you log in for the first time.

NOTE: The username is case sensitive.

2. Press Enter. The End User License Agreement (EULA) appears.

3. Read the information and press the Spacebar to advance each window until you have reached the end of the agreement.

4. Type YES to accept the agreement, then press Enter. The Appliance ID selection window appears.

NOTE: Use the up/down arrow keys to highlight another option and press the spacebar to make the selection.

Use the left/right arrow keys to select Next, Back or Cancel, then press Enter.

Selecting an Appliance ID and Tuning Your Appliance

1. Select the appliance ID and then press Enter to select Next.

2. Select one of the following setup types:

•normal—Default setup

•recovery—HA recovery setup

Configuring Date and Time for Your Appliance

1. Select the method you want to use to set the date and time.

•Manual— Allows you to manually input the date and time. Select Next.

•Server— Allows you to specify your time server. Select Next.

2. Select your time zone continent or area, and then select Next.

3. Select your time zone region, and then select Next.

Selecting the Internet Protocol and Configuring Your Appliance

1. Select one of the Internet protocols, IPv6 or IPv4.

2. Select Next. The Management Interface window appears.

3. Select the management interface, and then select Next.

4. Enter the values for the following parameters:

•Hostname— Type a fully qualified domain name as the system hostname

•IP Address, Network Mask, Gateway, and Primary DNS

Andere Handbücher für JSA7800

Inhaltsverzeichnis

Andere Juniper Netzwerk-Hardware Handbücher

Juniper

Juniper QFX Series Bedienungsanleitung

Juniper

Juniper SRX320 Bedienungsanleitung

Juniper

Juniper NFX250 Bedienungsanleitung

Juniper

Juniper NFX250-S1 Bedienungsanleitung

Juniper

Juniper SRX5600 Bedienungsanleitung

Juniper

Juniper T1600 Bedienungsanleitung

Juniper

Juniper CSE2000 Handbuch

Juniper

Juniper Junos Space JA2500 Montageanleitung

Juniper

Juniper 16-PORT GIGABIT ETHERNET XPIMS Bedienungsanleitung

Juniper

Juniper CTP1000 Series Montageanleitung

Juniper

Juniper JRR200 Montageanleitung

Juniper

Juniper SSR1400 Bedienungsanleitung

Juniper

Juniper SSR130 Montageanleitung

Juniper

Juniper MX150 Bedienungsanleitung

Juniper

Juniper MX SERIES - FAN TRAY UPGRADE REV1 4-2010 Bedienungsanleitung

Juniper

Juniper Junos Space JA2500 Bedienungsanleitung

Juniper

Juniper NFX150 Montageanleitung

Juniper

Juniper BTI7800 Series Installationsanleitung

Juniper

Juniper JATP700 Montageanleitung

Juniper

Juniper EX9200 Series Bedienungsanleitung

Juniper

Juniper SSR1500 Bedienungsanleitung

Juniper

Juniper EX8208 Bedienungsanleitung

Juniper

Juniper MX104 Bedienungsanleitung

Juniper

Juniper MX10016 Montageanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung