JVC KD-AR870 Bedienungsanleitung

ENGLISH

ESPAÑOL

FRANÇAIS

CD RECEIVER KD-AR870/KD-G820

RECEPTOR CON CD KD-AR870/KD-G820

RECEPTEUR CD KD-AR870/KD-G820

For canceling the display demonstration, see page 8.

Para cancelar la demostración en pantalla, consulte la página 8.

Pour annuler la démonstration des affichages, référez-vous à la page 8.

For installation and connections, refer to the separate manual.

Para la instalación y las cone iones, refiérase al manual separado.

Pour l’installation et les raccordements, se référer au manuel séparé.

INSTRUCTIONS

MANUAL DE INSTRUCCIONES

MANUEL D’INSTRUCTIONS

For customer Use:

Enter below the Model

No. and Serial No. which

are located on the top or

bottom of the cabinet.

Retain this information

for future reference.

Model No.

Serial No.

GET0359-001A

[J]

Cover_KD-AR870_820[J]1.indd 2Cover_KD-AR870_820[J]1.indd 2 5/12/05 4:54:26 pm5/12/05 4:54:26 pm

ENGLISH

How to forcibly eject a disc

“Please Eject” appears on the display.

• If this does not work, reset your unit.

• Be careful not to drop the disc when it ejects.

How to reset your unit

Your preset adjustments will also be erased.

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your co plete understanding and to

obtain the best possible perfor ance fro the unit.

INFORMATION (For U.S.A.

This equip ent has been tested and found to co ply with the li its for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These li its are designed to provide reasonable protection

against har ful interference in a residential installation. This equip ent generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

ay cause har ful interference to radio co unications. However, there is no guarantee that

interference will not occur in a particular installation. If this equip ent does cause har ful

interference to radio or television reception, which can be deter ined by turning the equip ent

off and on, the user is encouraged to try to correct the interference by one or ore of the

following easures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equip ent and receiver.

– Connect the equip ent into an outlet on a circuit different fro that to which the receiver is

connected.

– Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave

all servicing to qualified service personnel.

3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.

Avoid direct exposure to bea .

Caution:

Changes or odifications not approved by JVC could void the user ’s authority to operate the

equip ent.

EN02-07KD-AR870G820[J]2.indd 2EN02-07KD-AR870G820[J]2.indd 2 9/12/05 4:38:38 pm9/12/05 4:38:38 pm

ENGLISH

CONTENTS

Control panel — KD-AR870 and KD-G820 ....... 5

Remote controller — RM-RK50 ................. 6

Getting started ................................. 7

Basic operations ................................................... 7

Radio operations ..............................

Disc/USB memory operations ............. 11

Playing a disc in the unit ...................................... 11

Playing discs in the CD changer ............................ 11

Playing a USB memory ......................................... 12

Sound adjustments ........................... 16

General settings — PSM ................... 18

Title assignment ............................... 27

Satellite radio operations .................. 28

iPod®/D. player operations ................ 32

Other external component

operations .................................... 34

More about this unit ......................... 35

Maintenance .................................... 3

Troubleshooting ............................... 40

Specifications ................................... 45

For safety...

• Do not raise the volume level too much, as

this will block outside sounds, making driving

dangerous.

• Stop the car before performing any

complicated operations.

Temperature inside the car...

If you have parked the car for a long time in hot

or cold weather, wait until the temperature in

the car becomes normal before operating the

unit.

How to use the MODE/SEL button

If you use MOD or S L (select), the display

and some controls (such as the number buttons,

4/¢ buttons, 5/∞ buttons, and the

control dial) enter the corresponding control

mode.

x.: When you press number button 1 after

pressing MOD , to operate the FM

tuner.

Works as time countdown indicator.

To use these controls for original functions

again, wait for 15 seconds without pressing any

of these buttons until the control is cleared.

• Pressing MOD again also restores original

functions. However, pressing S L makes the

unit enters a different mode.

EN02-07KD-AR870G820[J]2.indd 3EN02-07KD-AR870G820[J]2.indd 3 9/12/05 10:55:07 am9/12/05 10:55:07 am

ENGLISH

How to read this manual

• Button operations are ainly explained with

the illustrations in the table below.

• So e related tips and notes are explained in

“More about this unit” (see pages 35 – 38).

Press briefly.

Press repeatedly.

Press either

one.

Press and hold until your

desired response begins.

Press and hold both

buttons at the sa e ti e.

The following arks are used to indicate...

: Built-in CD player operations.

: External CD changer operations.

: External USB e ory operations.

Caution:

If the te perature inside the car is below

0°C, the ove ent of ani ation and text

scroll will be halted on the display to prevent

the display fro being blurred.

appears on the display.

When the te perature increases, and the

operating te perature is resu ed, these

functions will start working again.

Warning:

If you need to operate the unit while driving,

be sure to look ahead carefully or you ay be

involved in a traffic accident.

Caution on volume setting:

Discs produce very little noise co pared

with other sources. Lower the volu e

before playing a disc to avoid da aging

the speakers by the sudden increase of the

output level.

EN02-07KD-AR870G820[J]1.indd 4EN02-07KD-AR870G820[J]1.indd 4 5/12/05 4:52:28 pm5/12/05 4:52:28 pm

ENGLISH

1 BAND button

2 • Control dial

• (standby/on attenuator) button

3 DISP (display) button

4 Remote sensor

• DO NOT expose the remote sensor to

strong light (direct sunlight or artificial

lighting).

5 Display window

6 5 (up) / ∞ (down) buttons

Parts i entification

Control panel — KD-AR870 and KD-G820

7 EQ (equalizer) button

8 0 (eject) button

9 USB (Universal Serial Bus) input terminal

p SRC (source) button

q (control panel release) button

w SEL (select) button

e MODE button

r Number buttons

t 4/¢ buttons

How to etach/attach the control panel

Detaching... Attaching...

CAUTION:

The lever comes out if you pressed the 0 button while

the panel is detached If this happens, push the lever back

into lock position before attaching the panel

ever

EN02-07KD-AR870G820[J]2.indd 5EN02-07KD-AR870G820[J]2.indd 5 9/12/05 9:50:35 am9/12/05 9:50:35 am

ENGLISH

Caution:

Main elements and features

1 (standby/on/attenuator) button

• Turns the power on if pressed briefly or

attenuates the sound when the power is on.

• Turns the power off if pressed and held.

2 5 U (up) / D (down) ∞ buttons

• Changes the FM/AM bands with 5 U.

• Changes the preset stations with D ∞.

• Changes the folder of the MP3/WMA/

USB.

• While playing an MP3 disc on an

MP3-co patible CD changer:

– Changes the disc if pressed briefly.

– Changes the folder if pressed and held.

• While listening to the satellite (SIRIUS or

XM) radio:

– Changes the categories.

Remote controller — RM-RK50

Installing the lithium coin battery

(CR2025

Aim the remote controller directly at the

remote sensor on the unit. Make sure there is

no obstacle in between.

Warning:

• Do not install any battery other than

CR2025 or its equivalent; otherwise, it ay

explode.

• Store the battery in a place where children

cannot reach to avoid risk of accident.

• To prevent the battery fro over-heating,

cracking, or starting a fire:

– Do not recharge, short, disasse ble,

heat the battery, or dispose of it in a fire.

– Do not leave the battery with other

etallic aterials.

– Do not poke the battery with tweezers or

si ilar tools.

– Wrap the battery with tape and insulate

when throwing away or saving it.

EN02-07KD-AR870G820[J]1.indd 6EN02-07KD-AR870G820[J]1.indd 6 5/12/05 4:52:30 pm5/12/05 4:52:30 pm

ENGLISH

Getting started

Basic operations

~ Turn on the power.

*1 Only for KD-AR870.

*2 You cannot select these sources if they

are not ready or not connected.

• For FM/AM tuner

• For S R US tuner

• For XM tuner

⁄ Adjust the volume.

@ Adjust the sound as you want. (See

pages 16 – 18.)

• While listening to an Apple iPod® or a

JVC D. player:

– Pauses/stops or resu es playback with

D ∞.

– Enters the ain enu with 5 U. (Now

5 U/D ∞/2 R/F 3 work as the enu

selecting buttons.)*

3 VOL – / VOL + buttons

• Adjusts the volu e level.

4 SOUND button

• Selects the sound ode (i-EQ: intelligent

equalizer).

5 SOURCE button

• Selects the source.

6 2 R (reverse) / F (forward) 3 buttons

• Searches for stations if pressed briefly.

• Fast-forwards or reverses the track if

pressed and held.

• Changes the tracks if pressed briefly.

• While listening to the satellite radio:

– Changes the channels if pressed briefly.

– Changes the channels rapidly if pressed

and held.

• While listening to an iPod or a D. player

(in enu selecting ode):

– Selects an ite if pressed briefly. (Then,

press D ∞ to confir the selection.)

– Skips 10 ite s at a ti e if pressed and

held.

* 5 U: Returns to the previous menu.

D ∞: Confirms the selection.

Continued on next page...

EN02-07KD-AR870G820[J]1.indd 7EN02-07KD-AR870G820[J]1.indd 7 5/12/05 4:52:31 pm5/12/05 4:52:31 pm

ENGLISH

To check the current clock time when the

power is turned off

Changing the display pattern

Ex.: When tuner is selected as the source

Source operation display

“SMALL” (CD jac et image) graphic*1 is displayed.

“LARGE” (full display size) graphic*1 is displayed.

Audio level meter is displayed (see “LevelMeter” on page 19).

Goes bac to the initial display pattern.

*1 You can use your edited file for graphic screen

(see pages 22 – 25).

Depending on a downloaded file, it may take

a longer time to show it on the display.

*2 The information ar will disappear if no

operation is performed for five seconds.

To drop the volume in a moment (ATT)

To restore the sound, press it

again.

To turn off the power

Basic settings

• See also “General settings — PSM” on pages

18 – 21.

2-1 Canceling the display

demonstrations

Turn the control dial to set “ emo/Link”

to “Off.”

2-2 Setting the clock

1 Press number button 4 ( ).

“Clock Hr” (hour) appears. Then,

turn the control dial to adjust the

hour.

2 Press ¢ to select “Clock Min”

(minute). Then, turn the control

dial to adjust the minute.

3 Press ¢ to select “24H/12H.”

Then, turn the control dial to select

“12Hours” or “24Hours,” time

display mode.

3 Exit from the setting.

EN08-15KD-AR870G820[J]f.indd 8EN08-15KD-AR870G820[J]f.indd 8 20/12/05 3:44:53 pm20/12/05 3:44:53 pm

ENGLISH

When an FM stereo roadcast is hard to

receive

3 Exit from the setting.

lights up on the display.

Reception improves, but stereo effect will

be lost.

To restore the stereo effect, select “Mono Off”

in step 2. goes off.

Storing stations in memory

You can preset six stations for each band.

FM station automatic presetting —

SSM (Strong-station Sequential

Memory)

1 Select the FM band (FM1 FM3) you

want to store into.

Radio operations

! Start searching for a station.

When a station is received, searching

stops.

• When receiving an FM stereo broadcast

with sufficient signal strength,

lights up on the display.

To stop searching, press the same button

again.

To tune in to a station manually

In step ! above...

2 Select a desired station frequency.

Continued on next page...

EN08-15KD-AR870G820[J]1.indd 9EN08-15KD-AR870G820[J]1.indd 9 5/12/05 4:52:47 pm5/12/05 4:52:47 pm

ENGLISH

3 Select “SSM.”

Local FM stations with the strongest signals are

searched and stored automatically in the FM

band.

Manual presetting

Ex.: Storing FM station of 92.5 MHz into preset

number 4 of the FM1 band.

Using the num er uttons

Using the Preset Station List

• When appears on the display, you can

move back to the previous display by pressing

number button 3.

1 Follow steps 1 and 2 on left column.

• By holding 5 / ∞, the Preset Station List

will appear (go to step 4 below).

3 Display the Preset Station List.

4 Select the preset number you want to

store into.

• You can move to the lists of the other FM

bands by pressing number button 5

() or 6 ( ) repeatedly.

5 Store the station.

EN08-15KD-AR870G820[J]1.indd 10EN08-15KD-AR870G820[J]1.indd 10 5/12/05 4:52:48 pm5/12/05 4:52:48 pm

Andere Handbücher für KD-AR870

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere JVC Autoempfänger Handbücher

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung