JVC KD-DB101 Bedienungsanleitung

ENGLISH

CD RECEIVER

KD-DB101

For installation and connections, refer to the separate manual.

INSTRUCTIONS

LVT1675-001A

[EX]

For canceling the display demonstration, see page 5.

KD-DB101.indb 1 07.2.5 1:39:35 PM

ENGLISH

Caution on volume setting:

Discs produce very little noise compared with other

sources. Lower the volume before playing a disc

to avoid damaging the speakers by the sudden

increase of the output level.

How to reset your unit

• Your preset adjustments will also be erased.

How to forcibly eject a disc

• Be careful not to drop the disc when it ejects.

• If this does not work, reset your unit.

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best

possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to

qualified service personnel.

3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical

instruments.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

Warning:

If you need to operate the unit while driving, be

sure to look ahead carefully or you may be involved

in a traffic accident.

Information for Users on Disposal of Old

Equipment

This symbol indicates that the product with

this symbol should not be disposed as general

household waste at its end-of-life. If you wish to

dispose of this product, please do so in accordance

with applicable national legislation or other rules in

your country and municipality. By disposing of this

product correctly, you will help to conserve natural

resources and will help prevent potential negative

effects on the environment and human health.

This unit is equipped with the steering wheel

remote control function.

• See the Installation/Connection Manual (separate

volume) for connection.

This symbol is only valid in

the European Union.

KD-DB101.indb 2KD-DB101.indb 2 07.2.5 1:39:39 PM07.2.5 1:39:39 PM

ENGLISH

The following marks are used to indicate...

: Indicator displayed for the

corresponding operation.

How to use the M MODE button

If you press M MODE, the unit goes into functions mode,

then the number buttons and 5/∞buttons work as

different function buttons.

Ex.: When number button 2 works as

MO (monaural) button.

To use these buttons for their original functions

again after pressing M MODE, wait for 5 seconds

without pressing any of these buttons until the

functions mode is cleared or press M MODE again.

Detaching the control panel

Attaching the control panel

CONTENTS

Control panel .................................. 4

Getting started................................ 5

Radio operations ............................. 6

DAB tuner operations....................... 9

Disc operations................................ 11

Sound adjustments.......................... 13

General settings — PSM.................. 14

Other external component operations

.... 16

Remote controller — RM-RK50............. 17

Maintenance................................... 18

More about this unit ........................ 19

Troubleshooting.............................. 21

Specifications.................................. 23

For security reasons, a numbered ID card is provided

with this unit, and the same ID number is imprinted on

the unit’s chassis. Keep the card in a safe place, as it will

help the authorities to identify your unit if stolen.

For safety...

• Do not raise the volume level too much, as this will

block outside sounds, making driving dangerous.

• Stop the car before performing any complicated

operations.

Temperature inside the car...

If you have parked the car for a long time in hot or cold

weather, wait until the temperature in the car becomes

normal before operating the unit.

KD-DB101.indb 3KD-DB101.indb 3 07.2.14 10:21:42 AM07.2.14 10:21:42 AM

ENGLISH

Parts identification

Control panel

Display window

1Control dial

20(eject) button

3Loading slot

4T/P (traffic programme/programme type) button

5DISP (display) button

64/¢buttons

7Display window

8(standby/on attenuator) button

9AUX (auxiliary) input jack

p5(up) / ∞(down) buttons

qSEL (select) button

wBAND button

eSRC (source) button

rRemote sensor

• You can control this unit with an optionally purchased

remote controller. For details, see pages 17.

• DO NOT expose the remote sensor to strong light (direct

sunlight or artificial lighting).

tEQ (equalizer) button

yMO (monaural) button

uSSM (Strong-station Sequential Memory) button

iNumber buttons

oRPT (repeat) button

;RND (random) button

aM MODE button

s(control panel release) button

dDisc information indicators

fDISC indicator

gPlayback mode / item indicators

hTEXT indicator

jRDS indicators

kTuner reception indicators

lS.BASS indicator

/EQ (equalizer) indicator

zTr (track) indicator

xSource display / Volume level indicator / Time

countdown indicator

cMain display

vSound mode (C-EQ: custom equalizer) indicators

KD-DB101.indb 4KD-DB101.indb 4 07.2.5 1:39:40 PM07.2.5 1:39:40 PM

ENGLISH

To drop the volume in

a moment (ATT)

To restore the sound, press

the button again.

To turn off the power

Basic settings

• See also “General settings — PSM” on page 14.

1Canceling the display demonstrations

Select “DEMO ON,” then “DEMO OFF.”

2Setting the clock

Select “CLOCK H” (hour), then adjust the hour.

Select “CLOCK M” (minute), then adjust the

minute.

Select “24H/12H,” then “24H” (hour) or “12H”

(hour).

3Finish the procedure.

To check the current clock time

Clock time is shown on the

display for about 5 seconds if

power is turned off. See also

page 14.

Getting started

Basic operations

~Turn on the power.

* You cannot select this source if it is not ready.

•For FM/AM tuner

•For DAB tuner

⁄Adjust the volume.

@Adjust the sound as you want. (See

page 13.)

Volume level appears.

VOL 15

KD-DB101.indb 5KD-DB101.indb 5 07.2.5 1:39:41 PM07.2.5 1:39:41 PM

ENGLISH

When an FM stereo broadcast is hard to receive

Reception improves, but stereo effect will be lost.

To restore the stereo effect, repeat the same

procedure. “MONO OFF” appears and the MO indicator

goes off.

Storing stations in memory

You can preset six stations for each band.

FM station automatic presetting—

SSM (Strong-station Sequential

Memory)

1Select the FM band (FM1 – FM3) you want to

store into.

“SSM” flashes, then disappears when automatic

presetting is over.

Local FM stations with the strongest signals are

searched and stored automatically in the FM band.

Radio operations

!Start searching for a station.

When a station is received,

searching stops.

To stop searching, press the

same button again.

To tune in to a station manually

In step !above...

2Select a desired station frequency.

Lights up when receiving an FM stereo

broadcast with sufficient signal strength.

88.3

Lights up when monaural mode is activated.

MONO

SSM

KD-DB101.indb 6KD-DB101.indb 6 07.2.5 1:39:42 PM07.2.5 1:39:42 PM

ENGLISH

92.5FM I

Preset number flashes for a while.

92.5P4

Manual presetting

Ex.: Storing FM station of 92.5 MHz into preset

number 4 of the FM1 band.

Listening to a preset station

2Select the preset station (1 – 6) you want.

To check the current clock time while

listening to an FM (non-RDS) or AM station

• For FM RDS stations, see page 9.

Frequency ÔClock

The following features are available only for FM

RDS stations.

Searching for your favorite FM RDS

programme

You can tune in to a station broadcasting your favorite

programme by searching for a PTY code.

• To store your favorite programme types, see the

following.

~The last selected PTY code

appears.

ŸSelect one of your favorite programme

types.

Select one of the PTY codes (see

page 9).

!Start searching for your favorite

programme.

If there is a station broadcasting

a programme of the same PTY

code as you have selected, that

station is tuned in.

KD-DB101.indb 7KD-DB101.indb 7 07.2.5 1:39:42 PM07.2.5 1:39:42 PM

ENGLISH

To store your favorite programme

types

You can store six favorite programme types.

Preset programme types in the number buttons

(1 to 6):

1Select a PTY code (see steps ~and Ÿon

page 7).

2Select the preset number (1 – 6) you want to

store into.

3Repeat steps 1and 2to store other PTY

codes into other preset numbers.

4Finish the procedure.

Using the standby receptions

You can use two types of Standby Reception for FM

Station—TA Standby Reception and PTY Standby

Reception. TA Standby Reception is also available for

DAB services.

TA Standby Reception

TA Standby Reception allows the unit to switch

temporarily to Traffic Announcement (TA) from any

source other than AM.

The volume changes to the preset TA volume level if

the

current level is lower than the preset level (see page 15).

Ex.: When “ROCK M” is selected

To activate TA Standby Reception

The TP (Traffic Programme) indicator

either lights up or flashes.

• If the TP indicator lights up, TA Standby Reception is

activated.

• If the TP indicator flashes, TA Standby Reception is

not yet activated. (This occurs when you are listening

to a station or a DAB service without the signals

required for TA Standby Reception.)

To activate TA Standby Reception, tune in to another

station or a DAB service providing these signals. The

TP indicator will stop flashing and remain lit.

To deactivate the TA Standby Reception

The TP indicator goes off.

PTY Standby Reception

PTY Standby Reception allows the unit to switch

temporarily to your favorite PTY programme from any

source other than AM.

To activate and select your favorite PTY code for

PTY Standby Reception, see page 15.

The PTY indicator either lights up or flashes.

• If the PTY indicator lights up, PTY Standby Reception

is activated.

• If the PTY indicator flashes, PTY Standby Reception is

not yet activated.

To activate PTY Standby Reception, tune in to another

station. The PTY indicator will stop flashing and

remain lit.

To deactivate the PTY Standby Reception, select

“OFF” for the PTY code (see page 15). The PTY indicator

goes off.

KD-DB101.indb 8KD-DB101.indb 8 07.2.5 1:39:43 PM07.2.5 1:39:43 PM

ENGLISH

Tracking the same programme—

Network-Tracking Reception

When driving in an area where FM reception is not

sufficient enough, this unit automatically tunes in to

another FM RDS station of the same network, possibly

broadcasting the same programme with stronger

signals (see the illustration below).

When shipped from the factory, Network-Tracking

Reception is activated.

To change the Network-Tracking Reception

setting, see “AF-REG” on page 15.

Programme A broadcasting on different frequency areas

(01 – 05)

Automatic station selection—

Programme Search

Usually when you press the number buttons, the preset

station is tuned in.

If the signals from the FM RDS preset station are not

sufficient for good reception, this unit, using the AF

data, tunes in to another frequency broadcasting the

same programme as the original preset station is

broadcasting.

• The unit takes some time to tune in to another

station using programme search.

• See also page 15.

Station name (PS) =Station

Frequency =Programme

type (PTY) =Clock =(back to

the beginning)

DAB tuner operations

To check the current clock time while

listening to an FM RDS station

PTY codes

NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA,

CULTURE, SCIENCE, VARIED, POP M (music), ROCK M

(music), EASY M (music), LIGHT M (music), CLASSICS,

OTHER M (music), WEATHER, FINANCE, CHILDREN, SOCIAL,

RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY,

NATION M (music), OLDIES, FOLK M (music), DOCUMENT

This unit can do the following:

• Tracing the same programme automatically

—Alternative Frequency Reception (see “DAB AF” on

page 15).

!Start searching for an ensemble.

When an ensemble is received,

searching stops.

To stop searching, press the

same button again.

⁄Select a service (either primary or

secondary) to listen to.

KD-DB101.indb 9KD-DB101.indb 9 07.2.5 1:39:44 PM07.2.5 1:39:44 PM

ENGLISH

7Display the radio text information

When TEXT indicator lights on the display, you can

check the Dynamic Label Segment (DLS: DAB radio

text).

To check the current clock time while

listening to a DAB service

Service name =Ensemble name

=Channel number =Frequency

=Programme type (PTY)

=Dynamic Label Segment (DLS)

=Clock =(back to the beginning)

Tuning in to a preset DAB service

2Select the preset DAB service (primary)

number (1 – 6) you want.

If the selected primary service has some secondary

services, pressing the same button again will tune

in to the secondary services.

DLS appears for a while.

Storing DAB services in memory

You can preset six DAB services (primary) for each band.

1Select a service you want (see steps ~to ⁄

on page 9).

2Select the preset number (1 – 6) you want to

store into.

P4 BAYERN 2

Preset number flashes for a while.

Other Main DAB Features

7TA Standby Reception

See page 8.

7PTY Search

See page 7.

You cannot store PTY codes separately for the DAB tuner

and for the FM tuner.

To tune in to an ensemble manually

Start searching for an ensemble, as in step !on page 9...

2Select a desired ensemble frequency.

Tracing the same programme—

Alternative Frequency Reception

You can keep listening to the same programme by

activating the Alternative Frequency Reception.

When shipped from the factory, Alternative Frequency

Reception is activated.

To deactivate the Alternative Frequency

Reception, see “DAB AF” on page 15.

KD-DB101.indb 10KD-DB101.indb 10 07.2.5 1:39:45 PM07.2.5 1:39:45 PM

Andere Handbücher für KD-DB101

Inhaltsverzeichnis

Andere JVC Autoempfänger Handbücher

JVC

JVC KD-DV4408 Bedienungsanleitung

JVC

JVC KD-AR390 Bedienungsanleitung

JVC

JVC KD-LH1101 Bedienungsanleitung

JVC

JVC KV-M700 - 6.4 TFT MONITOR Leitfaden

JVC

JVC GET0309-001A Bedienungsanleitung

JVC

JVC In-Dash DVD Player KD-R400 Leitfaden

JVC

JVC KD-ADV38J Leitfaden

JVC

JVC KS-F150M Bedienungsanleitung

JVC

JVC KD-G333 Bedienungsanleitung

JVC

JVC kd-g162 Bedienungsanleitung

JVC

JVC GET0576-001A Bedienungsanleitung

JVC

JVC KD-S52 Leitfaden

JVC

JVC KW-V41BT Bedienungsanleitung

JVC

JVC KS-FX201 Bedienungsanleitung

JVC

JVC KD-AHD59 - Radio / HD Leitfaden

JVC

JVC KD-LH7R Bedienungsanleitung

JVC

JVC KW-XC550J Bedienungsanleitung

JVC

JVC KD-MX2900R Bedienungsanleitung

JVC

JVC KS-FX270 Bedienungsanleitung

JVC

JVC KD-S845 Administratorhandbuch

JVC

JVC KWAVX800 - EXAD - DVD Player Bedienungsanleitung

JVC

JVC KD-AV7100 Leitfaden

JVC

JVC KD-S670 Bedienungsanleitung

JVC

JVC KD-R520 Handbuch

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung