JVC KD-FX321 Bedienungsanleitung

ENGLISH



‰∑¬

INSTRUCTIONS

§”·π–π”

GET0108-001A

[U]

For installation and connections, refer to the separate manual.

°√ÿ≥“¥Ÿ§ŸË¡◊Õ∑’Ë·¬°µË“ßÀ“° „π°“√µ‘¥µ—Èß·≈–°“√‡™◊ËÕ¡µËÕ

KS-FX321

CASSETTE RECEIVER KS-FX321

ENGLISH

S.BASS

SEL

DISP

78 9 10 11 12

«‘∑¬ÿ‡§√◊ËÕß‡≈Ëπ‡∑ª

KS-FX321

 !"

 !"#$

 !"#$%&'()*+,-./0



‰∑¬

ENGLISH

CONTENTS

Thank you for purchasing a JVC product. Please read all instructions carefully before operation,

to ensure your complete understanding and to obtain the best possible performance from the unit.

BEFORE USE

For safety....

• Do not raise the volume level too much, as this will

block outside sounds, making driving dangerous.

• Stop the car before performing any complicated

operations.

Temperature inside the car....

If you have parked the car for a long time in hot or cold

weather, wait until the temperature in the car becomes

normal before operating the unit.

How to reset your unit .............................. 2

LOCATION OF THE BUTTONS ........... 3

Control panel ............................................ 3

BASIC OPERATIONS ...................... 4

Turning on the power ............................... 4

RADIO OPERATIONS ..................... 5

Listening to the radio ................................ 5

Storing stations in memory ...................... 6

Tuning in to a preset station ..................... 7

TAPE OPERATIONS ....................... 8

Listening to a cassette ............................. 8

SOUND ADJUSTMENTS .................. 9

Turning on/off the super bass function ..... 9

How to reset your unit

Press and hold both the SEL (Select) and (Standby/On/Attenuator) buttons at the same

time for several seconds.

This will reset the built-in microcomputer.

Note:

Your preset adjustments – such as preset channels or sound adjustments – will also be erased.

Selecting preset sound modes ................. 9

Adjusting the sound ................................. 9

Storing your own sound adjustments ....... 10

OTHER MAIN FUNCTIONS ............... 11

Setting the clock ....................................... 11

Detaching the control panel ..................... 12

CD CHANGER OPERATIONS ............. 13

Playing CDs ............................................. 13

Selecting CD playback modes ................. 14

MAINTENANCE ............................ 15

TROUBLESHOOTING ..................... 16

SPECIFICATIONS .......................... 17

SEL (Select)

(Standby/On/Attenuator)

ENGLISH

S.BASS

SEL

DISP

78910 11 12

12 5 634

werty

ui o

;a s d

79pq8

LOCATION OF THE BUTTONS

Control panel

Display window

1(Standby/On/Attenuator) button

2S.BASS (Super Bass) button

3SEL (Select) button

4DISP (Display) button

50(Eject) button

6Cassette compartment

71/ ¡(PROG: program) buttons

8CD-CH button

9AM button

pFM button

q4/ ¢buttons

• Also functions as SSM buttons when

pressed together.

w+/– buttons

eNumber buttons

rMO (Monaural) button

RND (Random) button

tSCM (Sound Control Memory) button

y(Control panel release) button

Display window

uBand indicators

FM1, FM2, FM3,

iCD-CH (CD Changer) indicator

oSound mode indicators

BEAT, SOFT, POP

;MO(Monaural) indicator,

ST(Stereo) indicator

aRND (Random) indicator

sS.BASS (Super Bass) indicator

dMain display

ENGLISH

BASIC OPERATIONS

Adjust the volume.

To increase the volume

To decrease the volume

Volume level appears.

Adjust the sound as you want.

(See pages 9 – 10.)

To drop the volume in a moment

Press briefly while listening to any source.

“ATT” starts flashing on the display, and the volume

level will drop in a moment.

To resume the previous volume level, press the

button briefly again.

To turn off the power

Press and hold for more than 1 second.

Note:

When you use this unit for the first time, set the built-in

clock correctly, see page 11.

Turning on the power

Turn on the power.

Note on One-Touch Operation:

• When you select a source in step 2 below, the power

automatically comes on. You do not have to press this

button to turn on the power.

• If the cassette is already in the cassette compartment,

tape play starts automatically. However, it is not

recommended to leave the cassette in the compartment

when turning off the power or ignition key. It may

damage the tape head and the cassette.

Select the source.

To operate the tuner (FM or AM),

see pages 5 –7.

To operate the tape,

see page 8.

To operate the CD changer,

see pages 13 –14.

S.BASS

SEL

DISP

789

10 11 12

ENGLISH

Listening to the radio

You can use either automatic searching or manual

searching to tune in to a particular station.

Note:

When a cassette is in the cassette compartment, you

cannot select the tuner. Be sure to eject the cassette from

the cassette compartment to listen to the radio.

Searching a station automatically:

Auto search

Select the band (FM1 – 3, AM).

FM1 FM2

FM3

Selected band appears.

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to an

FM broadcast.

Start searching a station.

To search stations of higher

frequencies

To search stations of lower

frequencies

When a station is received, searching stops. CONTINUED ON THE NEXT PAGE

To stop searching before a station is received,

press the same button you have pressed for

searching.

Searching a station manually:

Manual search

Select the band (FM1 –3, AM).

FM1 FM2

FM3

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to an

FM broadcast.

Press and hold ¢or 4until

“M” (manual) starts flashing on the

display.

Selected band appears.

S.BASS

SEL

DISP

78910 11 12

RADIO OPERATIONS

ENGLISH

Storing stations in memory

You can use one of the following two methods to

store broadcasting stations in memory.

• Automatic preset of FM stations: SSM (Strong-

station Sequential Memory)

• Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM band

(FM1, FM2 and FM3).

Select the FM band (FM1 –3) you want

to store FM stations into.

Each time you press the button, the FM band

changes as follows:

FM1 FM2

FM3

Press and hold both buttons for more

than 2 seconds.

“SSM” appears, then disappears when automatic

preset is over.

Local FM stations with the strongest signals are

searched and stored automatically in the band

number you have selected (FM1, FM2 or FM3).

These stations are preset in the number buttons —

No.1 (lowest frequency) to No.6 (highest

frequency).

When automatic preset is over, the station stored

in number button 1 will be automatically tuned into.

Tune in to a station you want while “M”

is flashing.

To tune in to stations of higher

frequencies

To tune in to stations of lower

frequencies

• If you release your finger from the button,

the manual mode will automatically turn off

after 5 seconds.

• If you hold down the button, the frequency

keeps changing (in 50 kHz intervals for FM

and 9 kHz intervals for AM) until you release

the button.

When an FM stereo broadcast is hard to

receive:

Press MO/RND (Monaural/Random) while listening

to an FM stereo broadcast.

• Each time you press the button, the MO indicator

lights up and goes off alternately.

Lights up when receiving an

FM broadcast in stereo.

When the MO indicator is lit on the display, the

sound you hear becomes monaural but the

reception will be improved.

To restore the stereo effect, press the same

button again.

MO/RND

ENGLISH

Manual preset

You can preset up to 6 stations in each band (FM1,

FM2, FM3 and AM) manually.

Ex.: Storing an FM station of 88.3 MHz into the

preset number 1 of the FM1 band.

Select the band (FM 1 –3, AM) you

want to store stations into (in this

example, FM 1).

Each time you press the button, the FM band

changes as follows:

FM1 FM2

FM3

Tune in to a station of 88.3 MHz.

To tune in to stations of higher

frequencies

To tune in to stations of lower

frequencies

Press and hold the button (in this

example, 1) for more than 2 seconds.

Preset number “P1”flashes for a while.

Repeat the above procedure to store

other stations into other preset

numbers.

Notes:

• A previously preset station is erased when a new station

is stored in the same preset number.

• Preset stations are erased when the power supply to

the memory circuit is interrupted (for example, during

battery replacement). If this occurs, preset the stations

again.

Tuning in to a preset station

You can easily tune in to a preset station.

Remember that you must store stations first. If you

have not stored them yet, see “Storing stations in

memory”on pages 6 –7.

Select the band (FM1 –3, AM).

FM1 FM2

FM3

Select the number (1 –6) for the preset

station you want.

789

10 11 12

ENGLISH

TAPE OPERATIONS

Listening to a cassette

You can playback type I(normal) tapes.

Turn on the power.

Note on One-Touch Operation:

If a cassette is already in the cassette compartment, tape

play starts

automatically. However,

it is not recommended

to leave the cassette in the compartment when turning

off the power or ignition key. It may damage the tape

head and the cassette.

Insert a cassette into the cassette

compartment.

When one side of the tape

reaches its end during play,

the other side of the tape

automatically starts playing.

(Auto Reverse)

Select the tape direction.

Press the both buttons at the same time.

Each time you press the button, the tape

direction changes alternatively – forward

() and reverse ( ).

To stop play and eject the cassette

Press 0.

Tape play stops and the cassette automatically

ejects from the cassette compartment. The source

changes to the previously selected one.

• You cannot change the source if the cassette is

still in the cassette compartment.

To change source, you must eject the cassette

first.

• You can also eject the cassette by pressing 0

while the unit is turned off.

To fast-wind a tape

Press in ¡or 1.

The tape will be wound in the direction of the arrows

( ¡or 1).

Tape direction

To restart playback, lightly press the other button

which is not pressed in ( 1or ¡).

S.BASS

SEL

DISP

78910 11 12

ENGLISH

Adjust the level.

To increase the level

To decrease the level

Note:

Normally, the +/– buttons works as the volume control.

So you do not have to select “VOL” to adjust the volume

level.

SOUND ADJUSTMENTS

Turning on/off the super bass

function

The super bass function allows you to maintain the

richness and fullness of the bass sound regardless

of how low you set the volume.

Each time you press S.BASS, the function turns

on and off alternately.

S.BASS

Selecting preset sound modes

You can select a preset sound adjustment suitable

to the music genre.

Each time you press SCM, the sound mode

changes as follows.

(BEAT) (POP)

(SOFT)

Notes:

• You can adjust the preset sound mode to your

preference, and store it in memory.

If you want to adjust and store your original sound

mode, see “Storing your own sound adjustments” on

page 10.

• To adjust the bass and treble reinforcement levels or

to turn on/off the super bass function, see page 9.

• When one of the sound modes is selected, it is shown

on the display as follows:

For example, when “POP” is selected.

Indication To do: Range

BAS Adjust the bass. –6 (min.)

(Bass) |

+6 (max.)

TRE Adjust the treble. –6 (min.)

(Treble) |

+6 (max.)

FAD* Adjust the front R6 (Rear only)

(Fader) and rear speaker |

balance. F6 (Front only)

BAL Adjust the left L6 (Left only)

(Balance) and right speaker |

balance. R6 (Right only)

VOL Adjust the volume. 00 (min.)

(Volume) |

50 (max.)

*If you are using a two-speaker system, set the fader

level to “00.”

Adjusting the sound

You can adjust the sound characteristics to your

preference.

Select the item you want to adjust.

SEL

Each time you press the

button, the adjustable items

change as follows:

VOL

(volume)

BAS

(bass)

TRE

(treble)

FAD

(fader)

BAL

(balance)

Indication For: Preset values

BAS TRE S.BASS

SCM OFF (Flat sound) 00 00 OFF

BEAT Rock or +2 00 ON

disco music

SOFT Quiet

background +1 –3 OFF

music

POP Light music +4 +1 OFF

ENGLISH

Storing your own sound

adjustments

You can adjust the sound modes (BEAT, SOFT,

POP: see page 9) to your preference and store

your own adjustments in memory.

• There is a time limit in doing the following

procedure. If the setting is canceled before you

finish, start from step 1 again.

Call up the sound mode you want to

adjust.

See page 9 for details.

Select “BAS” (bass), “TRE” (treble)

SEL

Adjust the bass or treble level.

See page 9 for details.

To turn on or off the super bass

function

Each time you press S.BASS, the super bass

function turns on and off alternately. See page

9for details.

S.BASS

Repeat step 2 and 3 to adjust the other

items.

Press and hold SCM until the sound

mode you have selected in step 1

flashes on the display.

Your setting is stored in memory.

Repeat the same procedure to store

other setting.

To reset to the factory settings

Repeat the same procedure and reassign the preset

values listed in the table on page 9.

Inhaltsverzeichnis

Andere JVC Autoempfänger Handbücher

JVC

JVC KD-G432 Bedienungsanleitung

JVC

JVC KD-APD38 Bedienungsanleitung

JVC

JVC KD-T721BT Bedienungsanleitung

JVC

JVC KD-G615 Bedienungsanleitung

JVC

JVC KD-G343 Bedienungsanleitung

JVC

JVC KD-PDR35 Bedienungsanleitung

JVC

JVC KD-G335 Bedienungsanleitung

JVC

JVC KD-R501 Bedienungsanleitung

JVC

JVC KD-S11 Leitfaden

JVC

JVC KD-SV2800 Leitfaden

JVC

JVC KD-DV6202 Bedienungsanleitung

JVC

JVC KD-AR470 - Radio / CD Bedienungsanleitung

JVC

JVC KD-Lh401 Bedienungsanleitung

JVC

JVC KD-S30 Bedienungsanleitung

JVC

JVC KS-FX281 Bedienungsanleitung

JVC

JVC KW-XC838 Bedienungsanleitung

JVC

JVC KD-G738M Bedienungsanleitung

JVC

JVC KD-SHX751 Einrichtungshandbuch

JVC

JVC KD-G465 Leitfaden

JVC

JVC KD-ADV49 - DVD Player With LCD monitor Bedienungsanleitung

JVC

JVC GET0054-001A Bedienungsanleitung

JVC

JVC KD-BT22MP Bedienungsanleitung

JVC

JVC KD-SV3000 Bedienungsanleitung

JVC

JVC KW-XG700J Bedienungsanleitung

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung