JVC KD-PDR41 Bedienungsanleitung

ENGLISH

FRANÇAIS

CD RECEIVER

RÉCEPTEUR CD

KD-PDR41

For installation and connections, refer to the separate manual.

Pour l’installation et les raccordements, se référer au manuel séparé.

INSTRUCTIONS

MANUEL D’INSTRUCTIONS

GET0490-003A

[EX]

For canceling the display demonstration, see page 5.

Pour annuler la démonstration des affichages, référez-vous à la page 5.

Cover_KD-PDR41_003A_2.indd 1Cover_KD-PDR41_003A_2.indd 1 11/16/07 10:09:13 AM11/16/07 10:09:13 AM

ENGLISH

Information for Users on Disposal of Old

Equipment

This symbol indicates that the product with

this symbol should not be disposed as general

household waste at its end-of-life. If you wish to

dispose of this product, please do so in accordance

with applicable national legislation or other rules in

your country and municipality. By disposing of this

product correctly, you will help to conserve natural

resources and will help prevent potential negative

effects on the environment and human health.

Caution on volume setting:

Digital devices (CD USB) produce very little noise

compared with other sources. Lower the volume

before playing these digital sources to avoid

damaging the speakers by sudden increase of the

output level.

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best

possible performance from the unit.

IMPORTANT OR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to

qualified service personnel.

3. CAUTION: Visible and or invisible class 1M laser radiation when open. Do not view directly with optical

instruments.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

This symbol is only valid in

the European Union.

For security reasons, a numbered ID card is provided

with this unit, and the same ID number is imprinted on

the unit’s chassis. Keep the card in a safe place, as it will

help the authorities to identify your unit if stolen.

or safety...

• Do not raise the volume level too much, as this will

block outside sounds, making driving dangerous.

• Stop the car before performing any complicated

operations.

Temperature inside the car...

If you have parked the car for a long time in hot or cold

weather, wait until the temperature in the car becomes

normal before operating the unit.

Warning:

If you need to operate the unit while driving, be

sure to look around carefully or you may be involved

in a traffic accident.

EN02-07_KD-PDR41_003A_2.indd 2EN02-07_KD-PDR41_003A_2.indd 2 11/21/07 3:51:37 PM11/21/07 3:51:37 PM

ENGLISH

How to reset your unit

• Your preset adjustments will also be erased.

How to forcibly eject a disc

• Be careful not to drop the disc when it ejects.

• If this does not work, reset your unit.

How to use the M MODE button

If you press M MODE, the unit goes into functions mode,

then the number buttons and 5/∞ buttons will work

as different function buttons.

Ex. When number button 2 works as

MO (monaural) button.

To use these buttons for their original functions,

press M MODE again.

• Waiting for about 5 seconds without pressing any of

these buttons will automatically cancels the functions

mode.

This unit is equipped with the steering wheel

remote control function.

• See the Installation/Connection Manual (separate

volume) for connection.

CONTENTS

Control panel ................................... 4

etting started ................................. 5

Basic operations .................................................... 5

Radio operations .............................. 6

FM RDS operations ............................ 7

Searching for your favorite FM RDS programme ... 7

Disc/USB device operations ............... 10

Playing a disc in the unit ...................................... 10

Playing from a USB device ..................................... 10

iPod operations ................................ 13

Playback control from the unit ............................. 13

Sound adjustments ........................... 15

eneral settings — PSM ................... 16

Other external component

operations .................................... 18

Remote controller — RM-RK50 ......... 19

More about this unit ......................... 20

Maintenance .................................... 23

Troubleshooting ............................... 24

Specifications ................................... 26

Detaching the control panel

Attaching the control panel

EN02-07_KD-PDR41_003A_6.indd 3EN02-07_KD-PDR41_003A_6.indd 3 1/4/08 2:54:20 PM1/4/08 2:54:20 PM

ENGLISH

Parts identification

Display window

Control panel

1 5 (up) ∞ (down) buttons

2 0 (eject) button

3 (standby on attenuator) button

4 Control dial

5 Remote sensor

• You can control this unit with an optionally

purchased remote controller. For details, see

page 19.

• DO NOT expose the remote sensor to strong light

(direct sunlight or artificial lighting).

6 BAND button

7 Loading slot

8 Display window

9 T P (traffic programme programme type) button

p DISP (display) button

q (control panel release) button

w i (iPod) button

e 4 ¢ buttons

r SRC (source) button

t SEL (select) button

y M MODE button

u EQ (equalizer) button

i MO (monaural) button

o SSM (Strong-station Sequential Memory) button

; Number buttons

a RPT (repeat) button

s RND (random) button

d AUX (auxiliary) input jack

f USB (Universal Serial Bus) input jack

g Source display Track number Folder number

Time countdown indicator

h Tr (track) indicator

j RDS indicators—AF, REG, TP, PTY

k Playback mode item indicators—RND (random),

(disc), (folder), RPT (repeat)

l Tuner reception indicators—ST (stereo),

MO (monaural)

/ Sound mode (iEQ: intelligent equalizer) indicators

—CLASSIC, HIP HOP, JAZZ, ROCK, POPS, USER

z LOUD (loudness) indicator

EQ (equalizer) indicator

c Disc information indicators—

TAG (Tag information), (folder), (track file)

v DISC indicator

b Main display

EN02-07_KD-PDR41_003A_1.indd 4EN02-07_KD-PDR41_003A_1.indd 4 11/9/07 4:31:09 PM11/9/07 4:31:09 PM

ENGLISH

To drop the volume in a

moment (ATT)

To restore the sound, press the

button again.

To turn off the power

Basic settings

• See also “General settings — PSM” on pages

16 – 18.

1 Canceling the display demonstrations

Sele t “DEMO,” then “DEMO OFF.”

2 Setting the clock

Sele t “CLOCK HOUR”, then adjust the hour.

Sele t “CLOCK MIN” (minute), then adjust the

minute.

Sele t “24H/12H,” then “24 HOUR” or

“12 HOUR”.

3 Finish the procedure.

To check the current clock time while the

power is turned off

Clo k time is shown on the display for

about 5 se onds. See also page 16.

Getting started

Basic operations

~ Turn on the power.

* You cannot select these sources if they are not

ready or not connected.

! For F /A tuner

⁄ Adjust the volume.

@ Adjust the sound as you want. (See

page 15.)

Volume level appears.

EN02-07_KD-PDR41_003A_3.indd 5EN02-07_KD-PDR41_003A_3.indd 5 11/28/07 9:54:10 AM11/28/07 9:54:10 AM

ENGLISH

When an M stereo broadcast is hard to

receive

Reception improves, but the stereo effect will be lost.

To restore the stereo effect, repeat the same

procedure. “MONO OFF” appears and the MO indicator

goes off.

Storing stations in memory

You can preset six stations for each band.

M station automatic presetting —

SSM (Strong-station Sequential

Memory)

1 Select the M band ( M1 – M3) you want to

store into.

“SSM” flashes, then disappears when automatic

presetting is over.

Local FM stations with the strongest signals are

searched and stored automatically in the FM band.

Radio operations

! Start searching for a station.

When a station is received, searching stops.

To stop searching, press the same button

again.

To tune in to a station manually

In step ! above...

2 Select a desired station frequency.

Lights up when receiving an FM stereo

broadcast with sufficient signal strength.

Lights up when monaural mode is activated.

EN02-07_KD-PDR41_003A_1.indd 6EN02-07_KD-PDR41_003A_1.indd 6 11/9/07 4:31:12 PM11/9/07 4:31:12 PM

ENGLISH

FM RDS operations

What you can do with RDS

RDS (Radio Data System) allows FM stations to send an

additional signal along with their regular programme

signals.

By receiving the RDS data, this unit can do the

following

• Programme Type (PTY) Search (see the following)

• TA (Traffic Announcement) and PTY Standby

Receptions (see pages 8, 9, and 17)

• Tracing the same programme automatically

—Network-Tracking Reception (see page 9)

• Programme Search (see pages 9 and 17)

Searching for your favorite

FM RDS programme

You can tune in to a station broadcasting your favorite

programme by searching for a PTY code.

• To store your favorite programme types, see page 8.

~ The last selected PTY code

appears.

Ÿ Select one of your favorite programme

types.

Select one of the PTY codes see

page 9).

Continued on the next page

Manual presetting

Ex. Storing the FM station of 92.50MHz into preset

number 4 of the FM1 band.

Listening to a preset station

2 Select the preset station 1 – 6) you want.

To check the other information while

listening to an FM non-RDS) or AM station

• For FM RDS stations, see page 9.

Preset number flashes for a while.

Frequency Ô Clock

EN02-07_KD-PDR41_003A_6.indd 7EN02-07_KD-PDR41_003A_6.indd 7 1/4/08 2:46:47 PM1/4/08 2:46:47 PM

ENGLISH

Using the standby receptions

TA Standby Reception

TA Standby Reception allows the unit to switch

temporarily to Traffic Announcement (TA) from any

source other than AM.

The volume changes to the preset TA volume level if the

current level is lower than the preset level (see

page 1 ).

To activate TA Standby Reception

The TP (Traffic Programme) indicator

either lights up or flashes.

• If the TP indicator lights up, TA Standby Reception is

activated.

• If the TP indicator flashes, TA Standby Reception is

not yet activated. (This occurs when you are listening

to an FM station without the RDS signals required for

TA Standby Reception.)

To activate TA Standby Reception, tune in to another

station providing these signals. The TP indicator will

stop flashing and remain lit.

To deactivate the TA Standby Reception

The TP indicator goes off.

PTY Standby Reception

PTY Standby Reception allows the unit to switch

temporarily to your favorite PTY programme from any

source other than AM.

To activate and select your favorite PTY code for

PTY Standby Reception, see page 1 .

The PTY indicator either lights up or flashes.

• If the PTY indicator lights up, PTY Standby Reception

is activated.

• If the PTY indicator flashes, PTY Standby Reception is

not yet activated.

To activate PTY Standby Reception, tune in to another

station providing these signals. The PTY indicator will

stop flashing and remain lit.

! Start searching for your favorite

programme.

If there is a station broadcasting a programme

of the same PTY code as you have selected, that

station is tuned in.

Storing your favorite programme

types

You can store six favorite programme types.

Preset programme types in the number buttons

( to 6):

1 Select a PTY code (see pages 7 and 8).

2 Select the preset number ( – 6) you want to

store into.

3 Repeat steps and 2 to store other PTY codes

into other preset numbers.

4 Finish the procedure.

Ex.: When “ROCK M” is selected

EN08-19_KD-PDR41_003A_1.indd 8EN08-19_KD-PDR41_003A_1.indd 8 11/9/07 4:29:27 PM11/9/07 4:29:27 PM

ENGLISH

To deactivate the PTY Standby Reception, select

“OFF” for the PTY code (see page 1 ). The PTY indicator

goes off.

Tracing the same programme—

Network-Tracking Reception

When driving in an area where FM reception is not

sufficient enough, this unit automatically tunes in to

another FM RDS station of the same network, possibly

broadcasting the same programme with stronger

signals (see the illustration below).

When shipped from the factory, Network-Tracking

Reception is activated.

To change the Network-Tracking Reception

setting, see “AF-REG” on page 1 .

Programme A broadcasting on different frequency areas

(01 – 05)

Automatic station selection—

Programme Search

Usually when you press the number buttons, the preset

station is tuned in.

If the signals from the FM RDS preset station are not

sufficient for good reception, this unit, using the AF

data, tunes in to another frequency broadcasting the

same programme as the original preset station is

broadcasting.

• The unit takes some time to tune in to another

station using programme search.

• See also page 1 .

To check the current clock time while

listening to an FM RDS station

PTY codes

NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE,

SCIENCE, VARIED, POP M (music), ROCK M (music), EASY

M (music), LIGHT M (music), CLASSICS, OTHER M (music),

WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE

IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music),

OLDIES, FOLK M (music), DOCUMENT

Station name (PS) = Station

Frequency = Programme type

(PTY) = Clock = (back to the

beginning)

EN08-19_KD-PDR41_003A_1.indd 9EN08-19_KD-PDR41_003A_1.indd 9 11/9/07 4:29:32 PM11/9/07 4:29:32 PM

ENGLISH

Disc / USB device

operations

: For built-in CD player operations.

: For external USB device operations.

Playing a disc in the unit

All tracks will be played repeatedly until you change the

source or eject the disc.

To stop play and eject the disc

• Press SRC to listen to another

playback source.

Playing from a USB device

This unit can play MP3/WMA tracks stored in a USB

device (except HDD).

All tracks in the USB device will be played repeatedly

until you change the source.

If a USB device has been attached...

Playback starts from where it has been stopped

previously.

• If a different USB device is currently attached,

playback starts from the beginning.

To detach the USB device, straightly pull it out from

the unit.

• Removing the USB device will also stop playback.

Then, press SRC to listen to another playback source.

Cautions:

• Avoid using the USB device if it might hinder your

safety driving.

• Do not pull out or attach the USB device

repeatedly while “READING” appears on the

display.

• Do not start a car engine if a USB device is

connected.

• This unit may not be able to play the files

depending on the type of the USB device.

• Operation and power supply may not work as

intended for some USB devices.

• You cannot connect a computer to the USB input

jack of the unit.

• Make sure all important data has been backed up

to avoid losing the data.

• Do not leave a USB device in the car, expose to

direct sunlight, or high temperature to avoid

deformation or cause damage to the USB device.

• Some USB devices may not work immediately

after you turn on the power.

• For more details about USB operations, see pages

21 and 22.

USB input jack

USB memory

EN08-19_KD-PDR41_003A_1.indd 10EN08-19_KD-PDR41_003A_1.indd 10 11/9/07 4:29:33 PM11/9/07 4:29:33 PM

Andere Handbücher für KD-PDR41

Inhaltsverzeichnis

Sprachen:

Andere JVC Autoempfänger Handbücher

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung