JVC KD-R201 Bedienungsanleitung
ENGLISHFRANÇAIS
CD RECEIVER
RÉCEPTEUR CD
KD-R201
For installation and connections, refer to the separate manual.
Pour l’installation et les raccordements, se référer au manuel séparé.
INSTRUCTIONS
MANUEL D’INSTRUCTIONS
GET0583-003A
[EX]
For canceling the display demonstration, see page 5.
Pour annuler la démonstration des affichages, référez-vous à la page 5.
Cover_KD-R201_003A_4.indd 1Cover_KD-R201_003A_4.indd 1 6/27/08 9:47:39 AM6/27/08 9:47:39 AM
2
ENGLISH
Warning:
If you need to operate the unit while driving, be
sure to look around carefully or you may be involved
in a traffic accident.
How to reset your unit
• Your preset adjustments will also be erased.
How to forcibly eject a disc
• Be careful not to drop the disc when it ejects.
• If this does not work, reset your unit.
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best
possible performance from the unit.
IMPORTANT FOR ASER PRODUCTS
. CLASS LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to
qualified service personnel.
3. CAUTION: Visible and/or invisible class M laser radiation when open. Do not view directly with optical
instruments.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
Information for Users on Disposal of Old
Equipment and Batteries
[European Union only]
These symbols indicate that the product and the
battery with this symbol should not be disposed as
general household waste at its end-of-life.
If you wish to dispose of this product and the
battery, please do so in accordance with applicable
national legislation or other rules in your country
and municipality.
By disposing of this product correctly, you will help
to conserve natural resources and will help prevent
potential negative effects on the environment and
human health.
Notice:
The sign Pb below the symbol for batteries indicates
that this battery contains lead.
Products
Battery
EN02-05_KD-R201_003A_4.indd 2EN02-05_KD-R201_003A_4.indd 2 26/6/08 11:23:31 AM26/6/08 11:23:31 AM
ENGLISH
3
How to use the M MODE button
If you press M MODE, the unit goes into functions mode,
then the number buttons and 5 / ∞ buttons will work
as different function buttons.
Ex. When number button 2 works as
MO (monaural) button.
To use these buttons for their original functions
again after pressing M MODE, wait for 5 seconds
without pressing any of these buttons until the
functions mode is cleared, or press M MODE again.
Detaching the control panel
Attaching the control panel
Caution on volume setting:
Discs produce very little noise compared with other
sources. Lower the volume before playing a disc
to avoid damaging the speakers by the sudden
increase of the output level.
CONTENTS
Control panel ..................................
Getting started ................................ 5
Basic operations ................................................... 5
Radio operations ............................. 6
FM Radio Data System operations ..... 7
Searching for your favorite FM Radio Data System
programme .......................................................... 7
Disc operations ................................ 9
Playing a disc in the unit ..................................... 9
Sound adjustments .......................... 11
General settings — PSM .................. 12
Other external component
operations .................................... 15
Maintenance ................................... 15
More about this unit ........................ 16
Troubleshooting .............................. 18
Specifications .................................. 19
For safety...
• Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
• Stop the car before performing any complicated
operations.
Temperature inside the car...
If you have parked the car for a long time in hot or cold
weather, wait until the temperature in the car becomes
normal before operating the unit.
EN02-05_KD-R201_003A_3.indd 3EN02-05_KD-R201_003A_3.indd 3 20/6/08 9:58:05 AM20/6/08 9:58:05 AM
4
ENGLISH
o RPT (repeat) button
; RND (random) button
a AUX (auxiliary) input jack
s Disc information indicator
d D SC indicator
f Playback mode / item indicators—RND (random),
(disc), RPT (repeat)
g Radio Data System indicators—AF, REG, TP, PTY
h Tuner reception indicators—MO (monaural),
ST (stereo)
j LOUD (loudness) indicator
k EQ (equalizer) indicator
l Tr (track) indicator
/ Source display / Track number / Volume level
indicator / Time countdown indicator
z Main display
x Sound mode (c-EQ: custom equalizer) indicators—
JAZZ, ROCK, H P HOP, CLASS C, POPS, USER
Parts identification
Display window
Control panel
1 0 (eject) button
2 4 / ¢ buttons
3 Loading slot
4 (standby/attenuator) button
5 BAND button
6 Display window
7 T/P (traffic programme/programme type) button
8 D SP (display) button
9 5(up)/∞(down) buttons
p (control panel release) button
q SRC (source) button
w Control dial
e SEL (select) button
r M MODE button
t EQ (equalizer) button
y MO (monaural) button
u SSM (Strong-station Sequential Memory) button
Number buttons
EN02-05_KD-R201_003A_4.indd 4EN02-05_KD-R201_003A_4.indd 4 23/6/08 2:21:20 PM23/6/08 2:21:20 PM
ENGLISH
5
Basic settings
• See also “General settings — PSM” on
pages 12 – 14.
1
2
1Canceling the display demonstrations
Select “DEMO,” then “DEMO OFF.”
2Setting the clock
Select “CLOCK H” (hour), then adjust the hour.
Select “CLOCK M” (minute), then adjust the
minute.
Select “24H/12H,” then “24H” (hour) or
“12H” (hour).
3Finish the procedure.
To check the current clock time while the
power is turned off
Clock time is shown on the
display for about 5 seconds. See
also page 13.
Getting started
Basic operations
~Turn on the power.
Ÿ
* You cannot select “CD” as the playback source if
there is no disc in the unit.
!For FM/AM tuner
⁄Adjust the volume.
@Adjust the sound as you want. (See
pages 11 and 12.)
To drop the volume in a
moment (ATT)
To restore the sound, press the
button again.
To turn off the power
Volume level appears.
EN02-05_KD-R201_003A_f.indd 5EN02-05_KD-R201_003A_f.indd 5 28/7/08 3:30:26 PM28/7/08 3:30:26 PM
6
ENGLISH
When an FM stereo broadcast is hard to
receive
Reception improves, but the stereo effect will be lost.
To restore the stereo effect, repeat the same
procedure. “MONO OFF” appears and the MO indicator
goes off.
Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting—
SSM (Strong-station Sequential
Memory)
1Select the FM band (FM1 – FM3) you want to
store into.
2
3
“SSM” flashes, then disappears when automatic
presetting is over.
Local FM stations with the strongest signals are
searched and stored automatically in the FM band.
Radio operations
~
Ÿ
!Start searching for a station.
When a station is received, searching stops.
To stop searching, press the same button
again.
To tune in to a station manually
In step !above...
1
2Select a desired station frequency.
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
Lights up when monaural mode is activated.
EN06-13_KD-R201_003A_f.indd 6EN06-13_KD-R201_003A_f.indd 6 28/7/08 3:28:46 PM28/7/08 3:28:46 PM
7
ENGLISH
Manual presetting
E .: Storing the FM station of 92.5 MHz into preset
number 4 of the FM1 band.
1
2
3
Listening to a preset station
1
2 Select the preset station (1 – 6 you want.
To check the current clock time while
listening to an FM (non-Radio Data System
or AM station
• For FM Radio Data System stations, see page 9.
FM Radio Data System
operations
What you can do with Radio Data System
Radio Data System allows FM stations to send an
additional signal along with their regular programme
signals.
By receiving the Radio Data System data, this unit can
do the following:
• Programme Type (PTY) Search (see the following)
• TA (Traffic Announcement) and PTY Standby
Receptions (see pages 8, 9, 13 and 14)
• Tracing the same programme automatically
—Network-Tracking Reception (see page 9)
• Programme Search (see pages 9 and 14)
Searching for your favorite
FM Radio Data System
programme
You can tune in to a station broadcasting your favorite
programme by searching for a PTY code.
• To store your favorite programme types, see page 8.
~ The last selected PTY
code appears.
Ÿ Select one of your favorite programme
types.
or
Select one of the PTY codes (see
page 9 .
Preset number flashes for a while.
Frequency Ô Clock
Continued on the next page
EN06-13_KD-R201_003A_2.indd 7EN06-13_KD-R201_003A_2.indd 7 6/17/08 4:48:01 PM6/17/08 4:48:01 PM
8
ENGLISH
! Start searching for your favorite
programme.
If there is a station broadcasting a programme
of the same PTY code as you have selected, that
station is tuned in.
Storing your favorite programme
types
You can store si favorite programme types.
Preset programme types in the number buttons
(1 to 6 :
1 Select a PTY code (see pages 7 and 8 .
2 Select the preset number (1 – 6 you want to
store into.
3 Repeat steps 1 and 2 to store other PTY codes
into other preset numbers.
4 Finish the procedure.
E .: When “ROCK M” is selected
Using the standby receptions
TA Standby Reception
TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA) from any
source other than AM.
The volume changes to the preset TA volume level if the
current level is lower than the preset level (see
page 14).
To activate TA Standby Reception
The TP (Traffic Programme)
indicator either lights up or
flashes.
• If the TP indicator lights up, TA Standby Reception is
activated.
• If the TP indicator flashes, TA Standby Reception is
not yet activated. (This occurs when you are listening
to an FM station without the Radio Data System
signals required for TA Standby Reception.)
To activate TA Standby Reception, tune in to another
station providing these signals. The TP indicator will
stop flashing and remain lit.
To deactivate the TA Standby Reception
The TP indicator goes off.
PTY Standby Reception
PTY Standby Reception allows the unit to switch
temporarily to your favorite PTY programme from any
source other than AM.
To activate and select your favorite PTY code for
PTY Standby Reception, see page 13.
The PTY indicator either lights up or flashes.
• If the PTY indicator lights up, PTY Standby Reception
is activated.
• If the PTY indicator flashes, PTY Standby Reception is
not yet activated.
To activate PTY Standby Reception, tune in to
another station providing these signals. The PTY
indicator will stop flashing and remain lit.
EN06-13_KD-R201_003A_2.indd 8EN06-13_KD-R201_003A_2.indd 8 6/17/08 4:48:02 PM6/17/08 4:48:02 PM
9
ENGLISH
To check the current clock time while
listening to an FM Radio Data System station
PTY codes
NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE,
SCIENCE, VARIED, POP M (music), ROCK M (music), EASY
M (music), LIGHT M (music), CLASSICS, OTHER M (music),
WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE
IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music),
OLDIES, FOLK M (music), DOCUMENT
Disc operations
Playing a disc in the unit
~ Turn on the power.
Ÿ
All tracks will be played repeatedly until you
change the source or eject the disc.
To deactivate the PTY Standby Reception, select
“OFF” for the PTY code (see page 13). The PTY indicator
goes off.
Tracing the same programme—
Network-Tracking Reception
When driving in an area where FM reception is not
sufficient enough, this unit automatically tunes in to
another FM Radio Data System station of the same
network, possibly broadcasting the same programme
with stronger signals (see the illustration below).
When shipped from the factory, Network-Tracking
Reception is activated.
To change the Network-Tracking Reception
setting, see “AF-REG” on page 13.
Programme A broadcasting on different frequency areas
(01 – 05)
Automatic station selection—
Programme Search
Usually when you press the number buttons, the preset
station is tuned in.
If the signals from the FM Radio Data System preset
station are not sufficient for good reception, this
unit, using the AF data, tunes in to another frequency
broadcasting the same programme as the original
preset station is broadcasting.
• The unit takes some time to tune in to another
station using programme search.
• See also page 14.
Station name (PS = Station
Frequency = Programme
type (PTY = Clock = (back to
the beginning)
Continued on the next page
EN06-13_KD-R201_003A_2.indd 9EN06-13_KD-R201_003A_2.indd 9 6/17/08 4:48:03 PM6/17/08 4:48:03 PM
10
ENGLISH
To stop play and eject
the disc
• Press SRC to listen to
another playback source.
To fast-forward or reverse
the track
To go to the next or
previous track
To locate a particular track directly
To select a number from 01 – 06:
To select a number from 07 – 12:
Other main functions
Skipping tracks quickly during play
E .: To select track 32 while playing a track whose
number is a single digit (1 to 9)
1
2
Each time you press the button, you can skip 10
tracks.
• After the last track, the first track will be selected
and vice versa.
3
Prohibiting disc ejection
You can lock a disc in the loading slot.
To cancel the prohibition, repeat the same
procedure.
Changing the display information
The elapsed playing time with the current
track number = Clock with the current
track number = Disc title/performer * =
Track title * [ ] = (back to the beginning)
[ ] : Corresponding indicator lights up on the display.
* If the current disc is an audio CD, “NO NAME” appears.
EN06-13_KD-R201_003A_2.indd 10EN06-13_KD-R201_003A_2.indd 10 6/17/08 4:48:04 PM6/17/08 4:48:04 PM
Inhaltsverzeichnis
Sprachen:
Andere JVC Autoempfänger Handbücher
JVC
JVC KD-DB95BT Bedienungsanleitung
JVC
JVC KD-T801BT Bedienungsanleitung
JVC
JVC KD-G436 Bedienungsanleitung
JVC
JVC KS-FX8R Bedienungsanleitung
JVC
JVC KDBT1 - Radio / CD Leitfaden
JVC
JVC KD-R921BT Bedienungsanleitung
JVC
JVC KD-R610 Bedienungsanleitung
JVC
JVC KD-G311 Bedienungsanleitung
JVC
JVC KD-DV7302 Bedienungsanleitung
JVC
JVC KD-PDR41 Bedienungsanleitung
JVC
JVC KD-G415 Leitfaden
JVC
JVC KD-X472DBT Bedienungsanleitung
JVC
JVC KD-G317 Administratorhandbuch
JVC
JVC KD-LHX505 Leitfaden
JVC
JVC KW-XG504 Bedienungsanleitung
JVC
JVC KD-G511 Bedienungsanleitung
JVC
JVC EXAD KD-LHX502 Bedienungsanleitung
JVC
JVC KD-SX878R Bedienungsanleitung
JVC
JVC KD A60S Bedienungsanleitung
JVC
JVC KD-SH99R Montageanleitung
Beliebte Autoempfänger Handbücher anderer Marken
Sound Storm
Sound Storm STM93R Bedienungsanleitung
Soundstream
Soundstream VIR-5000 Bedienungsanleitung
Avson
Avson MKT Platform Bedienungsanleitung
Sony
Sony MEX-1HD - Audio Library System Bedienungsanleitung
Pioneer
Pioneer DVH-P500UB Bedienungsanleitung
Blaupunkt
Blaupunkt SANTIAGO CR 87 Bedienungsanleitung
