JVC KD-R303 Bedienungsanleitung

ENGLISHDEUTSCHРУCCKИЙ

ΕΛΛΗΝΙΚΑ

CD RECEIVER

CD-RECEIVER

РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ КОМПАКТ-ДИСКОВ

∆ΕΚΤΗΣ ΜΕ CD

KD-R303/KD-R302/KD-R301/

KD-R33

For installation and connections, refer to the separate manual.

Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.

Указания по установке и выполнению соединений приводятся в отдельной инструкции.

Για πληρoφoρίες σχετικά µε την εγκατάσταση και τις συνδέσεις, ανατρέξτε στo αντίστoιχo ξεχωριστό εγχειρίδιo.

INSTRUCTIONS

BEDIENUNGSANLEITUNG

ИНСТРУКЦИИ ПО ЭКСПЛУАТАЦИИ

Ο∆ΗΓΙΕΣ

GET0568-006A

[EY]

For canceling the display demonstration, see page 6.

Zum Abbrechen der Displaydemonstration siehe Seite 6.

Информацию об отмене демонстрации функций дисплея см. на стр. 6.

Για να ακυρώσετε την επίδειξη λειτουργίας στην θóνη, βλ. σελίδα 6.

Cover_KD-R303_006A_f.indd 1Cover_KD-R303_006A_f.indd 1 24/9/08 5:31:14 PM24/9/08 5:31:14 PM

ENGLISH

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best

possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to

qualified service personnel.

3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical

instruments.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

Information for Users on Disposal of Old

Equipment and Batteries

[European Union only]

These symbols indicate that the product and the

battery with this symbol should not be disposed as

general household waste at its end-of-life.

If you wish to dispose of this product and the

battery, please do so in accordance with applicable

national legislation or other rules in your country

and municipality.

By disposing of this product correctly, you will help

to conserve natural resources and will help prevent

potential negative effects on the environment and

human health.

Notice:

The sign Pb below the symbol for batteries indicates

that this battery contains lead.

Warning:

If you need to operate the unit while driving, be sure to

look around carefully or you may be involved in a traffic

accident.

Caution on volume setting:

Discs produce very little noise compared with other

sources. Lower the volume before playing a disc to

avoid damaging the speakers by the sudden increase of

the output level.

For safety...

• Do not raise the volume level too much, as this will

block outside sounds, making driving dangerous.

• Stop the car before performing any complicated

operations.

Temperature inside the car...

If you have parked the car for a long time in hot or cold

weather, wait until the temperature in the car becomes

normal before operating the unit.

Products

Battery

EN02-09_KD-R303_006A_2.indd 2EN02-09_KD-R303_006A_2.indd 2 22/8/08 9:27:43 AM22/8/08 9:27:43 AM

ENGLISH

How to reset your unit

• Your preset adjustments will also be erased.

How to forcibly eject a disc

• Be careful not to drop the disc when it ejects.

• If this does not work, reset your unit.

CONTENTS

OPERATIONS

Basic operations........................................... 4

Preparation.................................................. 6

Listening to the radio................................... 7

Disc operations............................................. 10

EXTERNAL DEVICES

Listening to the other external

components.............................................. 11

SETTINGS

Selecting a preset sound mode .................... 12

Menu operations.......................................... 13

Color settings (for KD-R33) .......................... 16

REFERENCES

More about this unit .................................... 17

Troubleshooting........................................... 19

Maintenance................................................ 21

Specifications............................................... 22

Detaching the control panel

Attaching the control panel

EN02-09_KD-R303_006A_f.indd 3EN02-09_KD-R303_006A_f.indd 3 15/9/08 9:16:18 AM15/9/08 9:16:18 AM

ENGLISH

Basic operations

8Eject disc.

9• Activate/deactivate TA Standby Reception.

• Enter PTY Searching mode [Hold].

pDetach the panel.

qChange the display information.

w• FM/AM: Search for station.

• CD: Select track.

eReturn to the previous menu.

rAUX (auxiliary) input jack

*1You cannot select “CD” as the playback source if no

disc is in the unit.

*2You cannot select these sources if they were disabled

in the Menu (see “Menu operations” on page 15).

*3Also known as “Control dial” in this manual.

1• FM/AM: Select preset station.

• CD: Select folder.

2• Turn on the power.

• Attenuate the sound (if the power is on).

• Turn off the power [Hold].

3Select the source.

FM =CD*1=AUX IN*2=AM*2=(back to

the beginning)

4• Enter list operations.

• Enter Menu setting [Hold].

5• Control the volume or selection [Turn].*3

• Confirm the selection [Press].*3

• FM: Enter SSM preset mode [Hold].*3

• CD: Enter playback mode [Hold].*3

6Loading slot

7Display window

EN02-09_KD-R303_006A_2.indd 4EN02-09_KD-R303_006A_2.indd 4 22/8/08 9:27:46 AM22/8/08 9:27:46 AM

ENGLISH

5OPERATIONS

Display window

1Tr (track) indicator

2Source display / Track number / Folder number /

Time countdown indicator

3DISC indicator

4Sound mode indicators—CLASSIC, HIP HOP, JAZZ,

ROCK, POPS, USER

5Playback mode / item indicators— RND (random),

(disc), (folder), RPT (repeat)

6EQ (equalizer) indicator

7LOUD (loudness) indicator

8Disc information indicators—

TAG (Tag information), (track/file), (folder)

9Main display

pRadio Data System indicators—AF, REG, TP, PTY

qTuner reception indicators—ST (stereo),

MO (monaural)

EN02-09_KD-R303_006A_2.indd 5EN02-09_KD-R303_006A_2.indd 5 22/8/08 9:27:46 AM22/8/08 9:27:46 AM

ENGLISH

Preparation

Cancel the display demonstration and set the clock

• See also page 13.

1Turn on the power.

[Turn] =[Press]

Cancel the display demonstrations

Select “DEMO,” then “DEMO OFF.”

Set the clock

Select “CLOCK” =“CLOCK SET.”

Adjust the hour, then press control dial once to proceed to adjust

the minute.

Select “24H/12H,” then “24 HOUR” or “12 HOUR.”

• To return to the previous menu, press BACK.

When the power is turned off: Check the current clock time when “CLOCK DISP” is set to

“CLOCK OFF,” (see page 13)

When the power is turned on: Change the display information of the current source

FM/AM Station Frequency =Clock =(back to the beginning)

FM Radio

Data System

Station name (PS) =Station Frequency =Programme type (PTY) =Clock =(back to the

beginning)

CD Audio CD/CD Text: Disc title/performer*1=Track title*1=Current track number with the

elapsed playing time =Current track number with the clock time =(back

to the beginning)

MP3/WMA: Album name/performer (folder name)*2=Track title (file name)*2=

Current track number with the elapsed playing time =Current track number

with the clock time =(back to the beginning)

*1If the current disc is an audio CD, “NO NAME” appears.

*2If an MP3/WMA file does not have Tag information or “TAG DISPLAY” is set to “TAG OFF” (see page 13),

folder name and file name appear.

EN02-09_KD-R303_006A_2.indd 6EN02-09_KD-R303_006A_2.indd 6 22/8/08 9:27:46 AM22/8/08 9:27:46 AM

ENGLISH

7OPERATIONS

Listening to the radio

1Select “FM” or “AM.”

2Search for a station to listen—Auto Search.

Manual Search: Hold either one of the buttons until “M” flashes on the display,

then press it repeatedly.

• When receiving an FM stereo broadcast with sufficient signal strength, “ST”

lights up on the display.

When an FM stereo broadcast is

hard to receive

• See also page 14.

Reception improves, but stereo effect will be lost.

• “MO” lights up on the display.

To restore the stereo effect, repeat the same

procedure to select “MONO OFF.” The MO indicator

goes off.

FM station automatic presetting

—SSM (Strong-station Sequential

Memory)

You can preset up to 18 stations for FM.

1While listening to a station...

Select “TUNER” =“MONO”

=“MONO ON”

2Select the preset number range you want to

store.

Local FM stations with the strongest signals are

searched and stored automatically.

To preset other 6 stations, repeat from step 1again.

Manual presetting (FM/AM)

You can preset up to 18 stations for FM and 6 stations

for AM.

Ex.: Storing FM station of 92.50 MHz into preset

number “04.”

2Select preset number “04.”

[Turn] =[Press]

Continued on the next page

EN02-09_KD-R303_006A_f.indd 7EN02-09_KD-R303_006A_f.indd 7 10/9/08 3:03:22 PM10/9/08 3:03:22 PM

ENGLISH

Selecting preset station

The following features are available only for FM

Radio Data System stations.

Searching for FM Radio Data

System programme —PTY Search

You can tune in to a station broadcasting your favorite

programme by searching for a PTY code.

1The last selected PTY code

appears.

2Select one of your favorite programme types

or a PTY code.

[Turn] =[Press]

3Start searching for your favorite programme.

If a station is broadcasting a programme of the

same PTY code as you have selected, that station is

tuned in.

Using the standby receptions

TA Standby Reception

TA Standby Reception allows the unit to switch

temporarily to Traffic Announcement (TA) from any

source other than AM.

The volume changes to the preset TA volume level if the

current level is lower than the preset level (see

page 14).

To activate TA Standby Reception

The TP (Traffic Programme)

indicator either lights up or flashes.

• If the TP indicator lights up, TA Standby Reception is

activated.

• If the TP indicator flashes, TA Standby Reception is

not yet activated. (This occurs when you are listening

to an FM station without the Radio Data System

signals required for TA Standby Reception.)

To activate the reception, tune in to another station

providing these signals. The TP indicator will stop

flashing and remain lit.

To deactivate the TA Standby Reception

The TP indicator goes off.

EN02-09_KD-R303_006A_2.indd 8EN02-09_KD-R303_006A_2.indd 8 22/8/08 9:27:49 AM22/8/08 9:27:49 AM

ENGLISH

9OPERATIONS

PTY Standby Reception

PTY Standby Reception allows the unit to switch

temporarily to your favorite PTY programme from any

source other than AM.

To activate and select your favorite PTY code for

PTY Standby Reception, see page 14.

The PTY indicator either lights up or flashes.

• If the PTY indicator lights up, PTY Standby Reception

is activated.

• If the PTY indicator flashes, PTY Standby Reception is

not yet activated.

To activate the reception, tune in to another station

providing these signals. The PTY indicator will stop

flashing and remain lit.

To deactivate the PTY Standby Reception, select

“PTY OFF” for the PTY code (see page 14). The PTY

indicator goes off.

Tracing the same programme—

Network-Tracking Reception

When driving in an area where FM reception is not

sufficient enough, this unit automatically tunes in to

another FM Radio Data System station of the same

network, possibly broadcasting the same programme

with stronger signals (see the illustration below).

Programme A broadcasting on different frequency areas

(01 – 05)

When shipped from the factory, Network-Tracking

Reception is activated.

To change the Network-Tracking Reception

setting, see “AF-REG” on page 14.

Automatic station selection—

Programme Search

Usually when you select a preset number, the station

preset in that number is tuned in.

If the signals from the FM Radio Data System preset

station are not sufficient for good reception, this

unit, using the AF data, tunes in to another frequency

possibly broadcasting the same programme as the

original preset station is broadcasting.

• The unit takes some time to tune in to another

station using programme search.

• See also page 14.

PTY codes

NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE,

SCIENCE, VARIED, POP M (music), ROCK M (music), EASY

M (music), LIGHT M (music), CLASSICS, OTHER M (music),

WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE

IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music),

OLDIES, FOLK M (music), DOCUMENT

EN02-09_KD-R303_006A_f.indd 9EN02-09_KD-R303_006A_f.indd 9 19/9/08 3:14:09 PM19/9/08 3:14:09 PM

ENGLISH

10 OPERATIONS

Pressing (or holding) the following buttons allows you

to...

MP3/WMA: Select folder

[Press]Select track

[Hold] Reverse/fast-forward track

Disc operations

1Turn on the power.

2Insert a disc.

All tracks will be played repeatedly until you change

the source or eject the disc.

Stop playing and ejecting the disc

• “NO DISC” appears.

Press SRC to listen to another

playback source.

Prohibiting disc ejection

To cancel the prohibition, repeat the same

procedure.

Selecting a track/folder

• For MP3/WMA discs, select the desired folder, then

the desired track by performing the control dial.

• To return to the previous menu, press BACK.

[Turn] =[Press]

EN10-17_KD-R303_006A_2.indd 10EN10-17_KD-R303_006A_2.indd 10 22/8/08 9:50:38 AM22/8/08 9:50:38 AM

Andere Handbücher für KD-R303

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere JVC Autoempfänger Handbücher

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung