JVC KD-X250BT Bedienungsanleitung

DIGITAL MEDIA RECEIVER

INSTRUCTION MANUAL

RÉCEPTEUR MULTIMÉDIA NUMÉRIQUE

MANUEL D’INSTRUCTIONS

Please read all instructions carefully before operation to obtain the best

possible performance from the unit.

Veuillez lires les instructions attentivement avant d’utiliser l’appareil afin

d’obtenir les meilleures performances possibles de l’appareil.

ENGLISH

FRANÇAIS

ʷʿʿʹƖʷʷʸ

ƾƭƿ

KD-X250BT

Information on Disposal of Old

Electrical and Electronic

Equipment and Batteries

(applicable for EU countries that

have adopted separate waste

collection systems)

Products and batteries with the symbol

(crossed-out wheeled bin) cannot be

disposed as household waste.

Old electrical and electronic equipment

and batteries should be recycled at a

facility capable of handling these items and

their waste by-products.

Contact your local authority for details in

locating a recycle facility nearest to you.

Proper recycling and waste disposal will

help conserve resources whilst preventing

detrimental effects on our health and the

environment.

Notice:

The sign “Pb”below the symbol for

batteries indicates that this battery

contains lead.

Warning

Do not operate any function that takes your

attention away from safe driving.

Caution

Volume setting:

Adjust the volume so that you can hear sounds

outside the car to prevent accident.

Lower the volume before playing digital sources

to avoid damaging the speakers by the sudden

increase of the output level.

General:

Avoid using the USB device or iPod/iPhone if it

might hinder driving safety.

Make sure all important data has been backed

up. We shall bear no responsibility for any loss of

recorded data.

Never put or leave any metallic objects (such as

coins or metal tools) inside the unit, to prevent a

short circuit.

USB rating is indicated on the main unit. To

view, detach the faceplate.

2|ޓENGLISH

2012/12/14ޓ17:11:8KD-X250BT_E_EN

How to attach/detach the

faceplate

How to reset your unit

Your preset adjustments will

also be erased.

Maintenance

Cleaning the unit

Wipe off dirt on the faceplate with a dry silicon or

soft cloth.

Cleaning the connector

Detach the faceplate and clean the connector

with a cotton swab gently, taking care not to

damage the connector.

How to read this manual:

This manual mainly explains operations using

the buttons on the faceplate.

< > indicates the displays on the faceplate.

[XX] indicates the initial setting of a menu

item.

Contents

Preparation ............................................................ 4

Canceling the display demonstration

Setting the clock

Basic operations ................................................... 4

Radio ........................................................................ 6

USB ............................................................................ 8

iPod/iPhone ........................................................... 9

External components ...................................... 10

Bluetooth姞connection ................................... 10

Bluetooth mobile phone ................................ 13

Bluetooth audio player ................................... 17

Sound adjustments .......................................... 18

Menu operations ............................................... 19

Additional information ................................... 22

Troubleshooting ................................................ 24

Specifications ..................................................... 26

Installation/Connection .................................. 27

ENGLISHޓ|3

2012/12/14ޓ17:11:8KD-X250BT_E_EN

Canceling the display

demonstration

The display demonstration is always turned on

unless you cancel it.

(Hold)

(Initial setting)

3Select <DEMO OFF>.

4Press MENU to exit.

Setting the clock

(Hold)

2Select <CLOCK>.

3Select <CLOCK SET>.

(Initial setting)

4Select the day of week.

5Adjust the hour.

6Adjust the minute.

7Select <24H/12H>.

8Select <24 HOUR> or <12 HOUR>.

9Press MENU to exit.

Basic operations

Display information

Changes the display information. (Press)

Scrolls the current display information. (Hold)

Source Display

FM/AM Station name (PS) *1 -Frequency -Programme type (PTY) *1 -

Day/Clock -(back to the beginning)

USB/BT AUDIO Album title/Artist -Track title -Track no./Playing time -Day/Clock -

(back to the beginning)

USB-IPOD (HEAD

MODE/IPOD MODE)

USB-IPOD (EXT MODE) EXT MODE)Day/Clock

AUX AUX)Day/Clock

*1 For FM Radio Data System stations only.

Preparation

4|ޓENGLISH

2012/12/14ޓ17:11:8KD-X250BT_E_EN

USB input terminal

AUX input jack

Detaches the faceplate

Display windowVolume knob

Faceplate

When you press or hold the following button(s)...

Button General function



SOURCE

Turns on.

Turns off. (Hold)

Press the SOURCE button on the faceplate and turn the volume knob

within 2 seconds to select the source.

Press repeatedly to select the source.

Volume knob (turn) Adjusts the volume level.

Selects items.

Volume knob

(press)

Mutes the sound or pauses playback.

Press the button again to cancel muting or resume playback.

Confirms selection.

Number buttons

(1- 6)

Selects the preset stations.

Stores the current station into the selected number button. (Hold)

('page 6)



Enters the hands-free menu ('page 14), or answers incoming call

when the unit rings.

Ends a call. (Hold)



Activates/deactivates TA Standby Reception. ('page 7)

Enters PTY Search mode. (Hold) ('page 7)

Returns to the previous menu.

/ Selects MP3/WMA folder. ('page 8)

Selects group/folder. ('page 17)

/ 

Searches for a station automatically. ('page 6)

Searches for a station manually. (Hold)

Selects track. ('page 8, 9, 17)

Fast-forwards or reverses track. (Hold)

Basic operations

ENGLISHޓ|5

2012/12/14ޓ17:11:8KD-X250BT_E_EN

Searching for a station

Select <FM> or <AM>.

Auto search. (Press)

Manual search. (Hold)

“M”flashes, then press the button repeatedly.

“ST”lights up when receiving an FM stereo broadcast with sufficient signal strength.

Storing stations in memory

Manual presetting

You can preset up to 18 stations for FM and 6

stations for AM.

While listening to a station...

(Hold)

The preset number flashes and “MEMORY”

appears. The current station is stored to the

selected number button (1 - 6).

- - - - - - - - or - - - - - - - -

(Hold)

“PRESET MODE”flashes.

The preset number flashes and “MEMORY”

appears.

2Select preset number.

Auto presetting (FM only)

SSM (Strong-station Sequential Memory)

You can preset up to 18 stations for FM.

(Hold)

-<TUNER>

-<SSM>

-<SSM 01 – 06>

“SSM”flashes. When all the stations are stored,

“SSM”stops flashing.

To preset <SSM 07 – 12>/<SSM 13 – 18>,

repeat steps 1 and 2.

Selecting a preset station

- - - - - - - - or - - - - - - - -

Setting the Radio Timer

You can tune in to a preset station at a specific

time regardless of the current source.

(Hold)

-<TUNER>

-<RADIO TIMER>

-<OFF>/<ONCE>/

[OFF] Cancels Radio Timer.

ONCE Activates once.

DAILY Activates daily.

WEEKLY Activates weekly.

-<FM>/<AM>

-<01>... <18>for FM/

<01>... <06>for AM

3Select the preset station.

4Set the activation day and time.

5Press MENU to exit.

lights up after the Radio Timer has been set.

Only one timer can be set. Setting a new timer

will override the previous setting.

The Radio Timer will not activate if the unit is

turned off or if <AM>is set to <OFF>in <SRC

SELECT>after selecting an AM station for the

timer.

Radio

6|ޓENGLISH

2012/12/14ޓ17:11:8KD-X250BT_E_EN

The following features are available only

for FM Radio Data System stations.

Searching for your favorite

Programmes—Programme

Type (PTY) Search

(Hold)

PTY Search starts.

If there is a station broadcasting a programme of the

same PTY code as you have selected, that station is

tuned in.

2Select a PTY code.

PTY codes

NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE,

SCIENCE, VARIED, POP M (music), ROCK M (music), EASY M

(music), LIGHT M (music), CLASSICS, OTHER M (music),

WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION,

PHONEIN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M

(music), OLDIES, FOLK M (music), DOCUMENT

Activating TA/News Standby

Reception

Standby Reception allows the unit to switch

temporarily to Traffic Announcement (TA) or

NEWS programme from any source other than

AM.

TA Standby Reception

TP indicator TA Standby Reception

Lights up

The unit will temporarily switch

to Traffic Announcement (TA) if

available.

Flashes

Not yet activated. Tune in to

another station providing the

Radio Data System signals.

To deactivate, press again.

NEWS Standby Reception

(Hold)

-<TUNER>

-<NEWS-STBY>

-<ON>/<OFF>

The unit will temporarily switch to News

Programme if available.

If the volume is adjusted during reception of

Traffic Announcement or News Bulletin or Alarm,

the adjusted volume is automatically memorized.

It will be applied the next time the unit switches

to Traffic Announcement or News.

Tracking the same programme

—Network-Tracking Reception

When driving in an area where FM reception is

not sufficient enough, this unit automatically

tunes in to another FM Radio Data System station

of the same network, possibly broadcasting the

same programme with stronger signals.

(Hold)

-<TUNER>

-<AF-REG>*

[AF ON]

Automatically searches for

another station broadcasting the

same programme in the same

Radio Data System network with

better reception when the

current reception is poor.

AF-REG ON

Switches to another station only

in the specific region using the

AF control.

OFF

Cancels.

* AF-REG: Alternative Frequencies-Regional

Automatic station selection—

Programme Search

When the signal of a preset station you have

selected is weak, this unit searches for another

station possibly broadcasting the same

programme as the original preset station is

broadcasting.

<P-SEARCH>('page 20)

Radio

ENGLISHޓ|7

2012/12/14ޓ17:11:8KD-X250BT_E_EN

Playing a USB device

USB 2.0 cable*

(not supplied)

USB input terminal

The source changes to “USB”and playback starts.

* Do not leave the cable in the car when not in

use.

This unit can play MP3/WMA files stored in USB

mass storage device (such as a USB memory

and Digital Audio Player).

Selecting a folder/track

Selects folder.

Selects track. (Press)

Fast-forwards or reverses the

track. (Hold)

Selecting a track/folder from

the list

- - - - - - - - or - - - - - - - -

PLAYLISTS, ARTISTS, ALBUMS, SONGS, GENRES

Select the desired list. (For JVC Playlist

Creator (JPC) and JVC Music Control (JMC)

file) ('page 23)

2Select a folder. (For MP3/WMA)

If the USB device contains many folders or tracks,

you can fast search for the desired folder or track

by turning the volume knob quickly.

3Select a track.

Selecting the playback modes

You can select one of the following playback

modes at a time.

Press 6for REPEAT.

Press 5for RANDOM.

2Press the button repeatedly.

REPEAT 

RPT OFF Cancels repeat playback.

TRACK RPT Repeats current track.

FOLDER RPT Repeats current folder.

“FOLDER RPT”is not applicable for JPC/JMC file.

RANDOM 

RND OFF Cancels random playback.

FOLDER RND

Randomly plays all tracks of

current folder, then tracks of

next folders.

ALL RND Randomly plays all tracks.

USB

8|ޓENGLISH

2012/12/14ޓ17:11:8KD-X250BT_E_EN

iPod/iPhone

Playing an iPod/iPhone

USB 2.0 cable* (accessory

of the iPod/iPhone)

USB input terminal

The source changes to “USB”-“USB-IPOD”and

playback starts.

* Do not leave the cable in the car when not in

use.

Selecting the control mode

-<HEAD MODE>/<IPOD MODE>/

HEAD

MODE

Controls music playback only from

this unit.

IPOD

MODE

Controls music playback from both

the unit and iPod/iPhone.

EXT

MODE

Controls music playback only from

the iPod/iPhone.

You can also change the setting using <IPOD

SWITCH>in the menu. ('page 21)

Selecting a track

Applicable under <HEAD MODE>/<IPOD MODE>

only.

Selects track/chapter. (Press)

Fast-forwards or reverses the track.

(Hold)

Selecting a track from the list

Applicable under <HEAD MODE>only.

PLAYLISTS)ARTISTS)ALBUMS)SONGS)

PODCASTS)GENRES)COMPOSERS)(back to

the beginning)

2Select the desired list.

Repeat this step until the desired track is selected.

If the selected menu contains many tracks, you

can fast search for the desired track by turning

the volume knob quickly.

3Select the desired track.

Selecting the playback modes

Applicable under <HEAD MODE>only.

You can select one of the following playback

modes at a time.

Press 6for REPEAT.

Press 5for RANDOM.

2Press the button repeatedly.

REPEAT 

ONE RPT Functions the same as “Repeat

One”of the iPod.

ALL RPT Functions the same as “Repeat

All”of the iPod.

RANDOM 

RND OFF Cancels random playback.

SONG RND Functions the same as “Shuffle

Songs”of the iPod.

ALBUM RND Functions the same as “Shuffle

Albums”of the iPod.

“ALBUM RND”is not applicable for some iPod/

iPhone.

ENGLISHޓ|9

2012/12/14ޓ17:11:8KD-X250BT_E_EN

You can connect an external component to the AUX (auxiliary) input jack on the faceplate.

For details, refer also to the instructions supplied with the external components.

Playing an external component

from AUX

Portable audio

player, etc.

3.5 mm stereo mini plug

with“L”shaped connector

(not supplied)

Use a 3-terminal plug head

stereo mini plug for optimum

audio output.

1Connect to AUX terminal on the faceplate.

2Select <AUX>.

3Turn on the connected component and

start playing the source.

Bluetooth姞connection

You can operate Bluetooth devices using this unit.

If you turn off the unit or detach the faceplate during a phone call conversation, the Bluetooth

connection is disconnected. Continue the conversation using your mobile phone.

This unit supports the following Bluetooth profiles

Hands-Free Profile (HFP 1.5)

Object Push Profile (OPP 1.1)

Phonebook Access Profile (PBAP 1.0)

Advanced Audio Distribution Profile (A2DP 1.2)

Audio/Video Remote Control Profile (AVRCP 1.3)

Connecting the microphone

MIC

Rear panel

Adjust the microphone angle.

MIC (Microphone input terminal)

Microphone (supplied)

Secure using cord clamps

(not supplied) if necessary.

External components

10 |ޓENGLISH

2012/12/14ޓ17:11:8KD-X250BT_E_EN

Andere Handbücher für KD-X250BT

Inhaltsverzeichnis

Sprachen:

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung