JVC KS-FX2200 Bedienungsanleitung

SERVICE MANUAL

2003/01

KS-FX220

CASSETTE RECEIVER

49770200301 KS-FX220

TABLE OF CONTENTS

1 Important Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

2 Disassembly method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

3 Adjustment method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12

4 Description of major ICs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-15

Area Suffix

J Northern America

SEL

ISP

SCM

MO/RND

789

10 11 12

TEL 13942296513 QQ 376315150 892498299

http://www.xiaoyu163.com

KS-FX220

1-2 (No.49770)

SECTION 1

Important Safety Precautions

1.1 Safety Precautions

!Burrs formed during molding may be left over on some parts of the chassis. Therefore,

pay attention to such burrs in the case of preforming repair of this system.

TEL 13942296513 QQ 376315150 892498299

http://www.xiaoyu163.com

KS-FX220

(No.49770)1-3

SECTION 2

Disassembly method

2.1 Main body

2.1.1 Removing the front panel unit

(See Fig.1)

(1) Press the release switch and remove the front panel unit in

the direction of the arrow.

Fig.1

2.1.2 Removing the bottom cover

(See Fig.2)

(1) Turn the body upside down.

(2) Insert a screwdriver to the two joints a and two joints b on

both sides of the body and the joint c on the back of the

body, then detach the bottom cover from the body.

CAUTION:

When disengaging the joint c using a screwdriver, do not dam-

age or break the board.

Fig.2

2.1.3 Removing the front chassis

(See Fig.3)

• Prior to performing the following procedure, remove the bottom

cover.

(1) Remove the two screws A on each side of the body.

(2) Release the two joints d and the two joints e on the sides.

remove the front chassis toward the front.

Fig.3

Front panel assembly

Eject button

Bottom cover

Joint b

Joint c

Joint a

Joint d Joint e

Front chassis

Joint d

AJoint e

TEL 13942296513 QQ 376315150 892498299

http://www.xiaoyu163.com

KS-FX220

1-4 (No.49770)

2.1.4 Removing the heat sink

(See Fig.4)

(1) Remove the four screws B attaching the heat sink on the

left side of the body, and remove the heat sink.

Fig.4

2.1.5 Removing the rear panel

(See Fig.5 )

• Prior to performing the following procedure, remove the front

chassis, the heat sink and bottom cover.

(1) Remove the four screws C attaching the rear panel and

three screw D attaching the pine jack on the back of the

body.

Fig.5

2.1.6 Removing the main amplifier board assembly

(See Fig.6)

• Prior to performing the following procedure, remove the front

chassis, the heat sink, bottom cover and the rear panel.

(1) Remove the two screws E attaching the main amplifier

board assembly on the top cover.

(2) Disconnect connector CN901,CN721 on the main amplifier

board assembly from the cassette mechanism assembly.

Fig.6

Heat sink

BB B

CDD

Main board assembly

CN901

CN721

TEL 13942296513 QQ 376315150 892498299

http://www.xiaoyu163.com

KS-FX220

(No.49770)1-5

2.1.7 Removing the cassette mechanism assembly

(See Fig.7)

• Prior to performing the following procedure, remove the front

chassis, the heat sink, bottom cover and the main amplifier

board assembly.

(1) Remove the four screws F attaching the cassette mecha-

nism assembly from the top cover.

Fig.7

2.1.8 Removing the head amplifier board

(See Fig.8)

• Prior to performing the following procedure, remove the front

chassis, the bottom cover, the heat sink, the main board as-

sembly and the cassette mechanism assembly.

(1) Remove the screw G attaching the head amplifier board.

(2) Move the head amplifier board in the direction of the arrow

to release the two joints f and remove.

(3) Disconnect the wire from CJ901 on the head amplifier

board.

Fig.8

F F

Top chassis

Cassette mechanism

joint f

CJ901

Head amplifier board

To head relay board

joint f

TEL 13942296513 QQ 376315150 892498299

http://www.xiaoyu163.com

KS-FX220

1-6 (No.49770)

2.1.9 Removing the chassis assembly

(See Fig.9,10)

• Prior to performing the following procedure, remove the front

chassis, the bottom cover, the heat sink, the main board as-

sembly , the cassette mechanism assembly and the head am-

plifier board.

(1) Turn the left side to cassette mechanism assembly.

(2) Disconnect the wire from CP722 on the relay board.

(3) Remove the screw H attaching the relay board.

(4) Move the relay board in the direction of the arrow to release

the joint g ,and remove.

(5) Turn the back side down , remove the four screws I attach-

ing the chassis assembly.

Fig.9

Fig.10

joint g

CP722

Relay board

Chassis assembly

TEL 13942296513 QQ 376315150 892498299

http://www.xiaoyu163.com

KS-FX220

(No.49770)1-7

2.1.10 Removing the (LCD & key) control switch board

(See Fig.11~13)

• Prior to performing the following procedure, remove the front

panel assembly.

(1) Remove the four screws J attaching the rear cover on the

back of the front panel assembly.

(2) Unjoint the eleven joints h with the front panel and the rear

cover.

(3) Remove the control switch board on the back of the front

panel.

Fig.11

Fig.12

Fig.13

J J

Joint h

LCD & Key control board

TEL 13942296513 QQ 376315150 892498299

http://www.xiaoyu163.com

KS-FX220

1-8 (No.49770)

2.2 Cassette mechanism assembly

• Prior to performing the following procedures, remove the head

amplifier board, the relay board and the mechanism bracket.

2.2.1 Removing the direction switch board

(See Fig.1)

(1) Unsolder the three wires aon the direction switch board.

(2) Remove the one screw Aattaching the direction switch

board.

2.2.2 Removing the FF / REW lever assembly

(See Fig.1)

(1) Remove the screw Battaching the FF / REW lever assem-

bly on the back of the cassette mechanism assembly.

(2) Remove the screw Con the upper side of the FF / REW

lever assembly.

(3) Lift and pull forward the FF / REW lever assembly to disen-

gage the joints b, c, dand e.

2.2.3 Reattaching the FF / REW lever assembly

(See Fig.1)

(1) Reattach the FF / REW lever assembly to the joint con the

back of the chassis.

(2) Reattach the pinch-roller shaft e, the change lever dand

the return link eto the chassis.

Fig.1

2.2.4 Removing the playback head

(See Fig.2)

• Prior to performing the following procedure, remove the direc-

tion switch board and the FF / REW lever assembly.

(1) Remove the screw Dattaching the playback head.

(2) Remove the Cwasher and pull out the FF roller.

(3) Remove the Ssupport plate, the A arm spring (a) and (b),

the playback head.

ATTENTION:

The A arm spring (a) differs from the A arm spring (b).

2.2.5 Removing the pinch-roller (R) and (F) assembly

(See Fig.2)

• Prior to performing the following procedure, remove the direc-

tion switch board and the FF / REW lever assembly.

(1) Remove the P arm spring (f) in the pinch-roller (F) assem-

bly from the chassis.

(2) Remove the P arm spring (r) in the pinch-roller (R) assem-

bly from the chassis.

(3) Draw out the pinch roller (F) and (R) assembly from the

shaft.

ATTENTION:

The P arm spring (f) differs from the P arm spring (r).

ATTENTION:

The pinch roller (F) assembly differs from the pinch roller (R)

assembly.

Fig.2

FF / REW lever assembly

Joint c

Joint b

Direction switch board

Joint d

Joint e

Soldering a

A arm spring (b) A arm spring (a)

Pinch-roller (R) assembly Pinch-roller (F) assembly

Shaft Shaft

S support plate

C washer

P arm spring (f)

P arm spring (r)

Remove the P arm spring (f)

from the chassis.

Remove the P arm spring (r)

from the chassis.

Playback head

FF roller

TEL 13942296513 QQ 376315150 892498299

http://www.xiaoyu163.com

KS-FX220

(No.49770)1-9

2.2.6 Removing the cassette hanger / cassette holder

(See Fig.3)

• Prior to performing the following procedure, remove the FF /

REW lever assembly.

(1) From the rear of the unit, bend the two tabs foutwards and

disengage the two joints gin the direction of the arrow.

(2) Push the eject lever and remove the cassette holder from

the playback head. Disengage the two joints hof the cas-

sette hanger / cassette holder and the eject lever in the di-

rection of the arrow.

(3) Lift the cassette hanger / cassette holder and disengage

the joint i of the return link and the eject lever.

Fig.3

2.2.7 Removing the reel disc assembly

(See Fig.4)

• Prior to performing the following procedure, remove the FF /

REW lever assembly and the cassette hanger / cassette hold-

er.

(1) Remove the C washer and pull out reel disc assembly.

ATTENTION:

Replace with a new C washer when reattaching.

Fig.4

2.2.8 Removing the motor assembly

(See Fig.5)

(1) Unsolder the two wires jon the motor assembly.

(2) Turn over the cassette mechanism assembly and remove

the main belt and the sub-belt from the motor pulley.

ATTENTION:

The main belt can now be removed.

(3) Remove the two screws Gattaching the motor assembly.

Fig.5

Cassette holder

Cassette hanger

Return link

Joint i

Eject lever

Joint h

Joint g

Joint g Tab f

Tab f

Chassis

Reel disc assembly

C washer

Flywheel (BF)

Flywheel (BR)

Main-belt

Reel base assembly

Sub-belt

Motor assembly

Motor pulley

Soldering j

TEL 13942296513 QQ 376315150 892498299

http://www.xiaoyu163.com

KS-FX220

1-10 (No.49770)

2.2.9 Removing the Flywheel (BF) and (BR) assembly

(See Fig.4 and 5)

• Prior to performing the following procedure, remove the cas-

sette hanger / cassette holder.

(1) From the upper side of the cassette mechanism assembly,

remove the C washer from each shaft of the flywheel (BF)

and (BR).

(2) Turn over the cassette mechanism assembly and remove

the main belt. Pull out the flywheel (BF) and (BR) down-

ward respectively.

Fig.4

Fig.5

2.2.10 Removing the reel base assembly

(See Fig.5 and 6)

(1) Raise the part kof the reel base assembly slightly and re-

move the selector link (B) on the front side of the cassette

mechanism assembly by turning it as shown in Fig.6.

(2) Remove the three screws Eand the one screw Fon the

underside of the cassette mechanism assembly.

ATTENTION:

The reel base assembly is not repairable. Handle with care.

Fig.6

Fig.7

Reel disc assembly

C washer

Flywheel (BF)

Flywheel (BR)

Main-belt

Reel base assembly

Sub-belt

Motor assembly

Motor pulley

Soldering j

Selector link (B).

Pinch-roller (R) assembly

Turn the selector link (B).

Inside of the reel base assembly

TEL 13942296513 QQ 376315150 892498299

http://www.xiaoyu163.com

Inhaltsverzeichnis

Andere JVC Autoempfänger Handbücher

JVC

JVC KW-M730BT Bedienungsanleitung

JVC

JVC KD-SH9105 Bedienungsanleitung

JVC

JVC KD-S845 Bedienungsanleitung

JVC

JVC KS-F185 Bedienungsanleitung

JVC

JVC KD-G305AU Bedienungsanleitung

JVC

JVC KD-A615 Bedienungsanleitung

JVC

JVC KD-LH915 Leitfaden

JVC

JVC KD-LH2000 Bedienungsanleitung

JVC

JVC KDSX980 - Am/Fm/Cd/Mp3 Detachable Face Bedienungsanleitung

JVC

JVC KD-R491 Administratorhandbuch

JVC

JVC KD-AR3000 Bedienungsanleitung

JVC

JVC KD-SH99R Montageanleitung

JVC

JVC KS-U15K Bedienungsanleitung

JVC

JVC KD-R985BTS Bedienungsanleitung

JVC

JVC KD-SH99 Bedienungsanleitung

JVC

JVC KD-LH552 Bedienungsanleitung

JVC

JVC KW NX7000 - Double Din Navigation Leitfaden

JVC

JVC KW-R930BTS Bedienungsanleitung

JVC

JVC KW-NT1 - Navigation System With DVD player Leitfaden

JVC

JVC KV-V8 Leitfaden

JVC

JVC KW-R910BT Bedienungsanleitung

JVC

JVC KD-DV7306 Bedienungsanleitung

JVC

JVC GET0140-001A Bedienungsanleitung

JVC

JVC KD-LX111R Bedienungsanleitung

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung