JVC KS-FX280 Bedienungsanleitung

KS-FX280 [EN] GET0061-001A [J]

INSTRUCTIONS

MANUAL DE INSTRUCCIONES

MANUEL D’INSTRUCTIONS

For customer Use:

Enter below the Model No. and

Serial No. which are located on

the top or bottom of the cabinet.

Retain this information for future

reference.

Model No.

Serial No.

GET0061-001A

[J]

For installation and connections, refer to the separate manual.

Para la instalación y las conexiones, refiérase al manual separado.

Pour l’installation et les raccordements, se référer au manuel séparé.

ENGLISH

ESPAÑOL

FRANÇAIS

KS-FX280

CASSETTE RECEIVER

RECEPTOR-REPRODUCTOR DE CASSETTE

RADIOCASSETTE

EN.COVER.KS-FX280[J]-3 30/11/01, 8:48 AM3

ENGLISH

KS-FX280 [EN] GET0061-001A [J]

How to reset your unit

Press and hold both the SEL (Select) and (Standby/On/Attenuator) buttons at the same

time for several seconds.

This will reset the built-in microcomputer.

Note:

• Your preset adjustments — such as preset channels or sound adjustments — will also be erased.

SEL (Select)

(Standby/On/Attenuator)

To use these buttons as number buttons again after pressing MODE, wait for 5 seconds without

pressing any number button until the functions mode is cleared.

• Pressing MODE again also clears the functions mode.

How to use the number buttons:

If you press MODE, the unit goes into functions mode and the number buttons work as different

function buttons.

MODE

Time countdown indicator

EN02-03-KS-FX280[J]-6 30/11/01, 8:51 AM2

ENGLISH

KS-FX280 [EN] GET0061-001A [J]

Thank you for purchasing a JVC product. Please read all instructions carefully before operation,

to ensure your complete understanding and to obtain the best possible performance from the unit.

CONTENTS

How to reset your unit .............................. 2

How to use the number buttons ............... 2

LOCATION OF THE BUTTONS ........... 4

Control panel ............................................ 4

Using the remote controller ...................... 5

Preparing the remote controller ............... 6

BASIC OPERATIONS ...................... 7

Turning on the power ............................... 7

RADIO BASIC OPERATIONS ............. 8

Listening to the radio ................................ 8

Storing stations in memory ...................... 8

Tuning into a preset station ...................... 10

TAPE OPERATIONS ....................... 11

Listening to a cassette ............................. 11

Finding the beginning of a tune ................ 12

Other convenient tape functions .............. 12

SOUND ADJUSTMENTS .................. 14

Turning on/off the loudness function ........ 14

Adjusting the sound ................................. 14

Using the sound control memory (SCM) .. 15

Canceling advanced SCM ....................... 15

Storing your own sound adjustments ....... 16

BEFORE USE

*For safety....

• Do not raise the volume level too much, as this

will block outside sounds, making driving

dangerous.

• Stop the car before performing any complicated

operations.

*Temperature inside the car....

If you have parked the car for a long time in hot

or cold weather, wait until the temperature in the

car becomes normal before operating the unit.

OTHER MAIN FUNCTIONS ............... 17

Setting the clock ....................................... 17

Selecting the level display ........................ 18

Detaching the control panel ..................... 19

CD CHANGER OPERATIONS ............. 20

Playing CDs ............................................. 20

Selecting CD playback modes ................. 21

EXTERNAL COMPONENT OPERATIONS 22

Selecting the external component to use . 22

MAINTENANCE ............................ 23

TROUBLESHOOTING ..................... 24

SPECIFICATIONS .......................... 25

EN02-03-KS-FX280[J]-6 30/11/01, 8:51 AM3

ENGLISH

KS-FX280 [EN] GET0061-001A [J]

LOUD

DISP

SEL

Multi

Music

Scan

MODE SCM

CD CHANGER CONTROL

KS-FX280

FM /AM

TAPE

278

356

uio

we rq

;

LOCATION OF THE BUTTONS

Control panel

1(Standby/On/Attenuator) button

2LOUD (Loudness) button

3SEL (Select) button

4Cassette compartment

50(Eject) button

6FM/AM button

7TAPE TS button

84/ ¢buttons

• Also functions as SSM buttons when

pressed together.

9+/– button

pDISP (Display) button

qRemote sensor

wMO (Monaural) button

eRPT (Repeat) button

rRND (Random) button

tNumber buttons

yMODE button

uSCM (Sound control memory) button

Display window

iCD-CH (CD Changer) button

o(Control panel release) button

Display window

;SCM indicator

aVolume (or audio) level indicator

sMO(Monaural) indicator

ST(Stereo) indicator

dLOUD indicator

fRND (Random) indicator

gBand indicators

FM1, FM2, FM3,

hCD-CH (CD Changer) indicator

jTAPE indicator

kMain display

lRPT (Repeat) indicator

EN04-07-KS-FX280[J]-7 30/11/01, 8:51 AM4

ENGLISH

KS-FX280 [EN] GET0061-001A [J]

RM-RK31

3• Functions as the PRESET button while

listening to the radio.

Each time you press the button, the preset

station number increases, and the selected

station is tuned in.

• Functions as the DISC – button while

listening to the CD changer.

Each time you press the button, the disc

number decreases, and the selected disc

starts playing.

4Functions the same as the + and – buttons on

the main unit.

NOTE:

These buttons cannot be used for the clock

(CLOCK H, CLOCK M), SCM LINK,

LEVEL, B. SKIP and EXT IN adjustments

(see pages 17, 18 and 22).

5Selects the sound mode.

Each time you press SCM (Sound Control

Memory), the mode changes.

6Selects the source.

Each time you press FUNC (function), the

source changes.

7• Searches stations while listening to the

radio.

• Fast forwards or reverses the track if

pressed and held while listening to a CD.

• Skips to the beginning of the next tracks or

goes back to the beginning of the current (or

previous tracks) if pressed briefly while

listening to a CD.

• Functions as the fast forward or rewind

buttons or Multi Music Scan buttons while

listening to a tape.

Using the remote controller

1Functions the same as the button

on the main unit.

2• Functions as the BAND button while

listening to the radio.

Each time you press the button, the band

changes.

• Functions as the DISC + button while

listening to the CD changer.

Each time you press the button, the disc

number increases, and the selected disc

starts playing.

• Functions as the PROG button while listening

to a tape.

Each time you press the button, the tape

direction changes alternately.

EN04-07-KS-FX280[J]-7 30/11/01, 8:51 AM5

ENGLISH

KS-FX280 [EN] GET0061-001A [J]

Preparing the remote controller

Before using the remote controller:

• Aim the remote controller directly at the remote

sensor on the main unit. Make sure there is no

obstacle in between.

• Do not expose the remote sensor to strong

light (direct sunlight or artificial lighting).

Installing the battery

When the controllable range or effectiveness

of the remote controller decreases, replace

the battery.

1. Remove the battery holder.

1) Push out the battery holder in the

direction indicated by the arrow using a

ball point pen or a similar tool.

2) Remove the battery holder.

2. Place the battery.

Slide the battery into the holder with the

+ side facing upwards so that the battery

is fixed in the holder.

Remote sensor

3. Return the battery holder.

Insert again the battery holder pushing it

until you hear a clicking sound.

WARNING:

• Store the batteries in a place which children

cannot reach.

If a child accidentally swallows the battery,

immediately consult a doctor.

• Do not recharge, short, disassemble or heat the

batteries or dispose of in a fire.

Doing any of these things may cause the

batteries to give off heat, crack or start a fire.

• Do not leave the batteries with other metallic

materials.

Doing this may cause the batteries to give off

heat, crack or start a fire.

• When throwing away or saving the batteries,

wrap in tape and insulate; otherwise, it may

cause the batteries to give off heat, crack or

start a fire.

• Do not poke the batteries with tweezers or

similar tools.

Doing this may cause the batteries to give off

heat, crack or start a fire.

Lithium coin battery

(product number:

CR2025)

(back side)

EN04-07-KS-FX280[J]-7 30/11/01, 8:51 AM6

ENGLISH

KS-FX280 [EN] GET0061-001A [J]

Adjust the volume.

Adjust the sound as you want

(see pages 14-16).

To drop the volume in a moment

Press briefly while listening to any

source. “AT T ”starts flashing on the display, and the

volume level will drop in a moment.

To resume the previous volume level, press the

button briefly again.

To turn off the power

Press and hold until “SEE YOU”appears

on the display.

Note:

When you use this unit for the first time, set the built-in

clock correctly, see page 17.

BASIC OPERATIONS

To increase the volume.

To decrease the volume.

Turning on the power

Turn on the power.

Note on One-Touch Operation:

• When you select a source in step 2 below, the

power automatically comes on. You do not have

to press this button to turn on the power.

Select the source.

To operate the tuner,

see pages 8 –10.

To operate the tape,

see pages 11 –13.

To operate the CD changer,

see pages 20 –21.

To operate the external component,

see page 22.

LOUD

DISP

SEL

Multi

Music

Scan

MODE SCM

CD CHANGER CONTROL

KS-FX280

FM /AM

TAPE

FM /AM

TAPE

Volume level appears

Volume level indicator

(See page 18)

EN04-07-KS-FX280[J]-7 30/11/01, 8:51 AM7

ENGLISH

KS-FX280 [EN] GET0061-001A [J]

RADIO BASIC OPERATIONS

To tune in a particular frequency

manually:

1Press FM/AM to select the band.

2Press and hold ¢or 4until “M” starts

flashing on the display.

Now you can manually change the frequency

while “M” is flashing.

3Press ¢or 4repeatedly until the

frequency you want is reached.

• If you hold down the button, the frequency

keeps changing until you release the button.

Storing stations in memory

You can use one of the following two methods to

store broadcasting stations in memory.

• Automatic preset of FM stations: SSM (Strong-

station Sequential Memory)

• Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM band

(FM1, FM2 and FM3).

Select the FM band (FM1, FM2 or FM3)

you want to store FM stations into.

Listening to the radio

Select the band (FM1, FM2, FM3 or

AM).

You can select any one of FM1, FM2, and

FM3 to listen to an FM station.

Start searching a station.

When a station is received, searching stops.

To stop searching before a station is received,

press the same button you have pressed for

searching.

To search stations of

higher frequencies.

Selected band appears

LOUD

DISP

SEL

Multi

Music

Scan

MODE SCM

CD CHANGER CONTROL

KS-FX280

FM /AM

TAPE

FM1 FM2 FM3 AM

FM /AM

FM1 FM2 FM3 AM

FM /AM

To search stations of

lower frequencies.

EN08-10-KS-FX280[J]-8 30/11/01, 8:54 AM8

ENGLISH

KS-FX280 [EN] GET0061-001A [J]

Press and hold the both buttons for

more than 2 seconds.

Local FM stations with the strongest signals are

searched and stored automatically in the band

number you have selected (FM1, FM2 or FM3).

These stations are preset in the number buttons —

No. 1 (lowest frequency) to No. 6 (highest

frequency).

When automatic preset is over, the station stored

in number button 1 will be automatically tuned in.

Manual preset

You can preset up to 6 stations in each band (FM1,

FM2, FM3 and AM) manually.

Ex: Storing an FM station of 88.3 MHz into the

preset number 1 of the FM1 band

Select the FM1 band.

Tune into a station of 88.3 MHz.

See page 8 to tune into a station.

Press and hold the button for more

than 2 seconds.

Repeat the above procedure to store

other station into other preset

numbers.

Notes:

•A previously preset station is erased when a new station

is stored in the same preset number.

•Preset stations are erased when the power supply to

the memory circuit is interrupted (for example, during

battery replacement). If this occurs, preset the stations

again.

“SSM”appears, then disappears when automatic

preset is over.

FM /AM

Preset number “P1”starts flashing for a while.

EN08-10-KS-FX280[J]-8 30/11/01, 8:54 AM9

ENGLISH

KS-FX280 [EN] GET0061-001A [J]

When an FM stereo broadcast is hard

to receive:

1Press MODE to enter the functions mode while

listening to an FM stereo broadcast.

2Press MO (monaural), while still in the

functions mode, so that the MO indicator lights

up on the display.

•Each time you press the button, the MO

indicator lights up and goes off alternately.

When the MO indicator is lit on the display, the

sound you hear becomes monaural but the

reception will be improved (the ST indicator goes

off.)

MODE

Tuning into a preset station

You can easily tune into a preset station.

Remember that you must store stations first. If you

have not stored them yet, see pages 8 and 9.

Select the band (FM1, FM2 FM3 or

AM) you want.

Select the number (1 – 6) for the

preset station you want.

FM1 FM2 FM3 AM

FM /AM

EN08-10-KS-FX280[J]-8 30/11/01, 8:54 AM10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere JVC Autoempfänger Handbücher

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung