JVC KV-MH6500 Bedienungsanleitung

ENGLISH

ESPAÑOL

FRANÇAIS

MONITEUR COULEUR À ÉCRAN LARGE

DE 6,5 POUCES KV-MH6500

6.5-INCH WIDE COLOR MONITOR KV-MH6500

MONITOR COLOR DE PANTALLA ANCHA

DE 6,5-PULGADAS KV-MH6500

INSTRUCTIONS

MANUAL DE INSTRUCCIONES

MANUEL D’INSTRUCTIONS

* This system cannot receive television broadcasts and is primarily designed

for use with a VCR or a DVD player. Use the separately sold mobile TV tuner

unit KV-C10 for optional television broadcast reception.

* Este sistema no puede recibir emisiones de televisión y ha sido diseño para

utilizarse esencialmente con un VCR o un reproductor DVD. Utilice la unidad

de sintonizador de TV móvil KV-C10 vendido por separado para una recepción

opcional de emisiones de televisión.

* Ce système ne peut pas recevoir les émissions de télévision et il est

essentiellement conçu pour l’utilisation avec un magnétoscope ou un lecteur

de DVD. Utilisez le module de tuner de télévision mobile KV-C10 vendu

séparément afin de pouvoir recevoir les émissions de télévision.

For customer Use:

Enter below the Model No. and Serial

No. which are located on the top or

bottom of the cabinet. Retain this

information for future reference.

Model No.

Serial No.

LVT0989-001A

[J]

For installation and connections, refer to

the separate manual.

Para la instalación y las conexiones,

refiérase al manual separado.

Pour l’installation et les raccordements,

référez-vous au manuel séparé.

;;;;;;

;

;;;;

;

;;;;;;

;;;;

;

;;

;

;;

;

;;

;

;;

;

;;

;

;;

;

;;;;

;;;;;;

;

;;;;

;

;;;;;;

;;;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;;;

TV TUNER

H/P

VOLUME

MONITOR

MODE

CALL

VCP

R F

VOCAL

SKIP

A.MEMO

RM-RK500

COVER_KV-MH6500[J]f.pm6 03.3.15, 23:383

ENGLISH

WARNING:

TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE THIS

UNIT TO RAIN OR MOISTURE.

CAUTION:

This monitor system should be used with DC 12V only.

To prevent electric shocks and fire hazards, DO NOT

use any other power source.

WARNINGS

• DO NOT INSTALL THE MONITOR IN A LOCATION WHICH

OBSTRUCTS DRIVING, VISIBILITY OR WHICH IS

PROHIBITED BY APPLICABLE LAWS AND

REGULATIONS.

• THERE MAY BE LEGAL REGULATIONS DEFINING THE

PERMISSIBLE INSTALLATION LOCATIONS FOR THE

DISPLAY UNIT WHICH DIFFER BY COUNTRY OR BY

STATE. BE SURE TO INSTALL THE DISPLAY UNIT IN A

CORRECT LOCATION ACCORDING TO SUCH LAWS.

• DO NOT INSTALL THE MONITOR IN A LOCATION WHICH

OBSTRUCTS THE OPERATION OF AN AIR BAG.

• THE DRIVER MUST NOT OPERATE THE MONITOR

SYSTEM WHILE DRIVING.

OPERATINGTHE MONITOR WHILE DRIVING MAY LEAD

TO CARELESSNESS AND CAUSE AN ACCIDENT.

* STOP YOUR VEHICLE IN A SAFE LOCATION WHEN

OPERATING THE MONITOR.

• THE DRIVER MUST NOT WATCH THE TELEVISION OR

VIDEOS WHILE DRIVING.

IFTHE DRIVERWATCHESTHETELEVISION OR AVIDEO

WHILE DRIVING, IT MAY LEAD TO CARELESSNESS

AND CAUSE AN ACCIDENT.

• WHEN LIGHTNING OCCURS, DO NOT TOUCH THE

ANTENNA WIRE OR THE TELEVISION.

TOUCHING THE ANTENNA WIRE OR THE TELEVISION

UNDER SUCH CONDITIONS MAY CAUSE

ELECTROCUTION.

• KEEP THE MONITOR AT AN APPROPRIATE SOUND

LEVEL WHILE DRIVING.

DRIVING WITH THE SOUND AT A LEVEL THAT

PREVENTS YOU FROM HEARING SOUNDS OUTSIDE

OF AND AROUND THE VEHICLE MAY CAUSE AN

ACCIDENT.

• ASK A TRAINED TECHNICIAN TO INSTALL THE

MONITOR SYSTEM.

INSTALLATION AND WIRING REQUIRE TRAINING AND

EXPERIENCE.

* TO BE SAFE, ASK THE SALES OUTLET WHERE YOU

PURCHASED THE MONITOR SYSTEM TO PERFORM THE

INSTALLATION.

• BE SURE NOT TO LET THE MONITOR FALL OR BE

STRONGLY IMPACTED SINCE THIS MAY CAUSE A

MALFUNCTION OR FIRE.

• DO NOT USE THE MONITOR WITH THE ENGINE OFF.

WATCHINGTHE MONITORWITHTHE ENGINE OFFWILL

CONSUME BATTERY POWER AND MAY PREVENT THE

ENGINE FROM STARTING.

Installation requires some special

knowledge.

Do not install the monitor system

yourself. Consult a dealer having

special knowledge of this kind for safe

and reliable installation.

EN02-07KV-MH6500[E]f.pm6 03.3.15, 23:532

ENGLISH

BEFORE USE

* For safety....

• Do not raise the volume level too much, as this

will block outside sounds, making driving

dangerous.

• Stop the car before performing any complicated

operations.

* Temperature inside the car....

If you have parked the car for a long time in hot

or cold weather, wait until the temperature in the

car becomes normal before operating the unit.

Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to

ensure your complete understanding and to obtain the best possible performance from the unit.

CONTENTS

PRECAUTIONS ............................................................ 4

CONTROLS AND FEATURES ......................................... 5

Wide color monitor ......................................................................... 5

Remote controller ........................................................................... 6

Replacing the battery ..................................................................... 7

BASIC OPERATIONS .................................................... 8

When you use JVC FM modulator KS-IF200 ............................. 9

Selecting the RF signals to the receiver ...................................... 9

ADJUSTMENTS ......................................................... 10

Using the Menu ............................................................................. 10

Basic procedure ......................................................................... 10

Adjustable items on the menu ................................................... 11

MAINTENANCE ........................................................ 13

TROUBLESHOOTING ................................................. 14

SPECIFICATIONS ....................................................... 15

EN02-07KV-MH6500[E]f.pm6 03.3.15, 23:533

ENGLISH

Cautions for handling the liquid crystal panel

The red spots, blue spots and green spots

on the panel surface are a normal

characteristic of liquid crystal panels, and

not a problem.

The liquid crystal panel is built with very high

precision technology and has at least

99.99% effective image pixels. Be aware

that on 0.01% of the panel there may be

missing or constantly light pixels.

When the temperature is very cold or very

hot, the image may not appear clearly or

may move slowly.

The image may not be synchronized with

the sound or the image quality may decline

in such environments. Note that this is not

a malfunction or problem.

• Usage temperature range: 0 °C to +40 °C

0 °C or colder

40 °C or hotter

When the liquid crystal panel reaches high

temperatures or low temperatures, chemical

changes occur within the liquid crystal panel

which may cause it to malfunction.

Do not expose the liquid crystal display to

direct sunlight.

• Storage temperature range:

–20 °C to +80 °C

Do not drop the liquid crystal display or strike

it sharply.

During the summer,

temperatures can

reach as high as

100 °C.

+80°C

–20°C

–20°C to +80°C

Spots

PRECAUTIONS

EN02-07KV-MH6500[E]f.pm6 03.3.15, 23:534

ENGLISH

Wide color monitor

1Screen (Liquid crystal panel)

2Remote sensor

Aim at this area when operating the

monitor from the remote controller.

3Down button ( )

Decrease the adjustment level of (or select

an appropriate setting for) the item

selected by the Menu button.

4Menu button ( )

Select an adjustment item.

5Up button ( )

Increase the adjustment level of (or select

an appropriate setting for) the item

selected by the Menu button.

6Power button ( )

•Press to turn on the power.

Each time you press the button, the input

mode changes when the power is on.

•Press and hold to turn off the power.

Note:

When you watch the screen at an angle, the

picture might not be clear. This is not a

malfunction. The finest picture can be seen

when you watch the screen straight-on.

CONTROLS AND FEATURES

654321

EN02-07KV-MH6500[E]f.pm6 03.3.15, 23:535

ENGLISH

Remote controller RM-RK500

Monitor section

1Power On/Standby button ( )

Turn on or off the monitor system.

2Up button ( )

Increase the adjustment level of (or select

an appropriate setting for) the item

selected by the MENU button.

3Down button ( )

Decrease the adjustment level of (or select

an appropriate setting for) the item

selected by the MENU button.

4MODE button

Each time you press the button, the input

mode changes.

5MENU button

Call up or erase the Menu screen.

TV tuner section

The following buttons can be used for operating

JVC’s KV-C10.

• For specific operations, refer to the instructions

for the KV-C10.

6TV CH buttons ( / )

7SKIP button

8VOCAL button

9A.MEMO (auto memory) button

pRF (radio frequency) button

qH/P (headphones) VOLUME buttons

(+/–)

wCALL button

Video cassette player (VCP) section

The following buttons can be used for operating

JVC’s KV-V8 or KV-V10.

• For specific operations, refer to the instructions

for the KV-V8 or KV-V10

ePower On/Standby button ( )

r7(Stop) button

t1(Rewind)/¡(Fast-forward)

buttons

y3(Play) button

Monitor section

TV tuner section

Video cassette player section

;;;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;;;

;;;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;;;

;;;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;;;;

TV TUNER

H/P

VOLUME

MONITOR

MODE

CALL

VCP

R F

VOCAL

SKIP

A.MEMO

;;;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;;;

;;;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;;;

;;;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;;;;

TV TUNER

H/P

VOLUME

MONITOR

MODE

CALL

VCP

R F

VOCAL

SKIP

A.MEMO

;;;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;;;

;;;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;;;

;;;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;;;;

TV TUNER

H/P

VOLUME

MONITOR

MODE

CALL

VCP

R F

VOCAL

SKIP

A.MEMO

EN02-07KV-MH6500[E]f.pm6 03.3.15, 23:536

ENGLISH

Before using the remote controller:

When you use the remote controller for the

first time, pull out the insulation sheet as

illustrated to the right.

•Aim the remote controller directly at the

remote sensor on the color monitor. Make

sure there is no obstacle in between.

•Do not expose the remote sensor to strong

light (direct sunlight or artificial lighting).

(back side)

Lithium coin battery

(product number:

CR2025)

(back side)

When the controllable range or effectiveness

of the remote controller decreases, replace

the battery.

1. Remove the battery holder.

While pushing in the lock using a ball-point

pen or a similar tool (1), pull out the

battery holder in the direction indicated by

the arrow (2).

2. Replace the battery.

Slide a new battery into the holder with

the + side facing upwards so that the

battery is fixed in the holder.

3. Return the battery holder.

Insert the battery holder again pushing it

until you hear a clicking sound.

Replacing the battery

Insulation sheet

Pull out

WARNING:

• Store the battery in a place which children

cannot reach.

If a child accidentally swallows the battery,

immediately consult a doctor.

• Do not recharge, short, disassemble or heat

the battery or dispose of in a fire.

Doing any of these things may cause the

battery to give off heat, crack or start a fire.

• Do not leave the battery with other metallic

materials.

Doing this may cause the battery to give off

heat, crack or start a fire.

• When throwing away or saving the battery,

wrap in tape and insulate; otherwise, it may

cause the battery to give off heat, crack or

start a fire.

• Do not poke the battery with tweezers or

similar tools.

Doing this may cause the battery to give off

heat, crack or start a fire.

CAUTION:

DO not leave the remote controller in a place

(such as dashboard) exposed to direct sunlight

for a long time. Otherwise, it may be damaged.

(The battery has been installed when shipped

from the factory.)

(back side)

EN02-07KV-MH6500[E]f.pm6 03.3.15, 23:537

ENGLISH

BASIC OPERATIONS

Preparation

Before operating the monitor system, make sure that all external components are

correctly connected and installed.

Turn on the power.

Select the input source.

Each time you press the button, the input source changes

as follows:

• When KV-C10 is not connected: • When KV-C10 is connected:

Select the video format— PAL or NTSC, while

the indication of the video format is still on the

screen.

Each time you press the button, the video format

alternates between PAL (initial setting) and NTSC. Select

whichever matches to the incoming signals.

Note:

When not using the KV-C10: You can preset the video format

separately for “AV 1” and “AV 2.”

1, 2

Monitor

Monitor Remote

Ex. When “AV 1” is selected

Monitor

Remote

Ex. When “VIDEO 1” is selected

;;;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;;;

;;;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;

;

;;;;;;;;

;;;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;

;

;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;;;;

TV TUNER

H/P

VOLUME

MONITOR

MODE

CALL

R F

VOCAL

SKIP

A.MEMO

MODE

AV 1 AV 2

VIDEO1

TV VIDEO2

AV1: PAL

MODE

VIDEO 1

Remote

EN08-9KV-MH6500[E]f.pm6 03.3.18, 14:078

ENGLISH

Play back the external component.

To operate the external components, refer to the manuals for the connected

components.

Select the external component and adjust the volume on the car

receiver.

To check the current input source

On the monitor: Press the Power button ( ) once.

On the remote: Press the MODE button once.

The on-screen display appears for about 5 seconds.

To turn off the power

On the monitor: Press and hold the Power button ( ).

On the remote: Press the Power On/Standby button ( ) .

When you use JVC FM modulator KS-IF200

Selecting the RF signals to the receiver

You can listen to playback sounds from the external component through the receiver even if

it is equipped with no line input.

•Refer also to the instructions of KS-IF200.

When KV-C10 is connected:

Press the RF button on the remote controller.

Each time you press the button, “RF ON”and “RF OFF”alternate and the sounds you hear

through the car speakers change accordingly.

RF ON : Select to listen to the sound of the external component.

RF OFF : Select to listen to the radio (through the receiver).

Monitor Remote

MODE

EN08-9KV-MH6500[E]f.pm6 03.3.15, 23:559

ENGLISH

ADJUSTMENTS

Using the Menu

You can make your own adjustments using the Menu.

• For the adjustable items, see the next page.

Basic procedure

Call up the Menu.

Select an item you want to adjust.

Each time you press the button, the cursor moves to the

next item.

Adjust the level of the selected item (or select

an appropriate setting for the selected item).

• When “RESET” is selected in the above step, the Color,

Brightness, and Tint settings are reset.

Monitor Remote

Cursor

Monitor Remote

Ex: When adjusting Tint

MODE

TINT 32

Activated button is

highlighted.

1, 2, 4 1, 2, 4

;;;;;;;;;;;;

;

;;;;;;;;;;

;

;;;;;;;;;;

;

;;;;;;;;;;

;

;;;;;;;;;;

;

;;;;;;;;;;

;

;;;;;;;;;;;;

;;;;;;;;;

;

;;;;;;;

;

;;;;;;;

;

;;;;;;;

;

;;;;;;;

;

;;;;;;;

;

;;;;;;;

;

;;;;;;;

;

;;;;;;;

;

;;;;;;;

;

;;;;;;;

;

;;;;;;;

;

;;;;;;;

;

;;;;;;;

;

;;;;;;;

;

;;;;;;;

;

;;;;;;;

;

;;;;;;;

;

;;;;;;;;;

;;;;;;;;;;;;

;

;;;;;;;;;;

;

;;;;;;;;;;

;

;;;;;;;;;;

;

;;;;;;;;;;

;

;;;;;;;;;;

;

;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;;;

TV TUNER

H/P

VOLUME

MONITOR

MODE

CALL

R F

VOCAL

SKIP

A.MEMO

MODE

COLOR

BRIGHT

TINT

DIMMER

FORMAT

RESET

EN10-12KV-MH6500[E]f.pm6 03.3.15, 23:5610

Andere Handbücher für KV-MH6500

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere JVC Autoempfänger Handbücher

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung