JVC KW-XR810 Bedienungsanleitung

ESPAÑOL

FRANÇAIS

ENGLISH

GET0661-001A

[J]

For canceling the display demonstration, see page 4. / Para cancelar la demostración en pantalla,

consulte la página 4. / Pour annuler la démonstration des affichages, référez-vous à la page 4.

CD RECEIVER / RECEPTOR CON CD /

RÉCEPTEUR CD

For customer Use:

Enter below the Model

No. and Serial No. which

are located on the top or

bottom of the cabinet.

Retain this information

for future reference.

Model No.

Serial No.

KW-XR810

INSTRUCTIONS

MANUAL DE INSTRUCCIONES

MANUEL D’INSTRUCTIONS

For installation and connections, refer to the separate manual.

Para la instalación y las conexiones, refiérase al manual separado.

Pour l’installation et les raccordements, se référer au manuel séparé.

2ENGLISH

INFORMATION (For U.S.A.)

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

– Consult the dealer or an experienced radio/TV technician for help.

Caution:

Changes or modifications not approved by JVC could void the user’s authority to operate the

equipment.

IMPORTANT FOR LASER PRODUCTS

1.CLASS 1 LASER PRODUCT

2.CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave

all servicing to qualified service personnel.

3.CAUTION: (For U.S.A.) Visible and/or invisible class II laser radiation when open. Do not stare

into beam.

(For Canada) Visible and/or invisible class 1M laser radiation when open. Do not

view directly with optical instruments.

4.REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

[European Union only]

Warning:

If you need to operate the unit while driving,

be sure to look around carefully or you may be

involved in a traffic accident.

For safety...

• Do not raise the volume level too much, as

this will block outside sounds, making driving

dangerous.

• Stop the car before performing any

complicated operations.

Temperature inside the car...

If you have parked the car for a long time in

hot or cold weather, wait until the temperature

in the car becomes normal before operating

the unit.

3ENGLISH

How to read this manual

The following icons/symbols are used to

indicate:

Press and hold the button(s)

until the desired operation

begins.

Turn the control dial.

Turn the control

dial to make a

selection, then

press to confirm.

( XX) Reference page number

<XXXX> Menu setting item

Continued on the next page

How to reset your unit

Your preset adjustments

will also be erased (except

the registered Bluetooth

device). ( 14, 15)

How to forcibly eject a disc

• You can forcibly eject the loaded disc even

if the disc is locked. To lock/unlock the disc,

10.

• Be careful not to drop the disc when it ejects.

• If this does not work, reset your unit.

CONTENTS

3 How to read this manual

3 How to reset your unit

3 How to forcibly eject a disc

Canceling the display

demonstration

4 Setting the clock

5 Preparing the remote controller

(RM-RK50)

6 Basic operations

8 Listening to the radio

10 Listening to a disc

12 Listening to the USB device

13 Using the Bluetooth® device

16 Using a Bluetooth mobile phone

19 Using a Bluetooth audio player

20 Changing the Bluetooth settings

22 Listening to the HD Radio™

Broadcast

23 Listening to the satellite radio

26 Listening to the iPod/iPhone

29 Listening to the other external

components

30 Selecting a preset sound mode

31 Menu operations

36 Selecting the variable buttons and

display color illumination

37 Creating your own day and night

colors—User

38 Setting the time for dimmer

38 More about this unit

43 Maintenance

44 Troubleshooting

50 Specifications

[Hold]

Thank you for purchasing a JVC product.

Please read all instructions carefully before

operation, to ensure your complete

understanding and to obtain the best possible

performance from the unit.

4ENGLISH

Turn on the power.

SET UP

DEMO

Clock

PRO EQ

3 Select <DEMO>.

DEMO

Off

Setting the clock

4 Select <Off>.

DEMO

Off

5 Finish the procedure.

Canceling the display demonstration

6 Adjust the minute.

Clock

Set Clock

Clock Adjust

24H/12H

Set Clock

1 00 AM

7 Select <24H/12H>.

Clock

Set Clock

Clock Adjust

24H/12H

8 Select <24Hours> or <12Hours>.

24H/12H

24Hours

12Hours

9 Finish the procedure.

1 Turn on the power.

SET UP

DEMO

Clock

PRO EQ

3 Select <Clock>.

SET UP

DEMO

Clock

PRO EQ

4 Select <Set Clock>.

Clock

24H/12H

Set Clock

Clock Adjust

5 Adjust the hour.

Set Clock

1 : 00 AM

(Initial setting)

[Hold]

5ENGLISH

Warning (to prevent accidents and

damage):

• Do not install any battery other than CR2025

or its equivalent.

• Do not leave the remote controller in a place

(such as dashboards) exposed to direct

sunlight for a long time.

• Store the battery in a place where children

cannot reach.

• Do not recharge, short, disassemble, heat the

battery, or dispose of it in a fire.

• Do not leave the battery with other metallic

materials.

• Do not poke the battery with tweezers or

similar tools.

• Wrap the battery with tape and insulate when

throwing away or saving it.

This unit is equipped with the steering wheel

remote control function.

Before operating, connect an exclusive remote

adapter (not supplied) which matches your car

to the steering wheel remote input terminal on

the rear of the unit.

• For details, refer also to the instructions

supplied with the remote adapter.

Preparing the remote controller (RM-RK50)

When you use the remote controller for the first

time, pull out the insulation sheet.

For USA-California Only:

This product contains a CR Coin Cell Lithium

Battery which contains Perchlorate Material—

special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/

perchlorate

If the effectiveness of the remote controller

decreases, replace the battery.

Replacing the lithium coin battery

CR2025

Caution:

• Danger of explosion if battery is incorrectly

replaced. Replace only with the same or

equivalent type.

• Battery shall not be exposed to excessive heat

such as sunshine, fire, or the like.

Insulation sheet

Caution on volume setting:

Digital devices (CD/USB) produce very little

noise compared with other sources. Lower the

volume before playing these digital sources

to avoid damaging the speakers by sudden

increase of the output level.

Caution:

If the temperature inside the car is below 0°C

(32°F), the movement of animation and text

scroll will be halted on the display to prevent

the display from being blurred. appears on

the display.

When the temperature increases, and the

operating temperature is resumed, these

functions will start working again.

6ENGLISH

Changing the display information and pattern

Ex.: When tuner is selected as the source

Basic operations

Control dial

Ejects the disc Loading slot

USB (Universal Serial

Bus) input terminal

Display window

Remote sensor

• DO NOT expose to bright sunlight.

Source operation display

• If a station has been assigned a title, station

title appears after about 5 seconds.

• To assign a title to a station, 9.

Audio level meter display

(<Level Meter>, 33)

Auxiliary input jack

Selects preset station/channel.

7ENGLISH

When you press or hold the following button(s)...

Main unit Remote

controller General operation

Turns on.

• When the power is on, pressing /I/ATT on the remote controller

also mutes the sound or pauses. Press /I/ATT again to cancel

muting or resume playback.

Turns off if pressed and held.

Selects the available sources (if the power is turned on).

• If the source is ready, playback also starts.

Adjusts the volume level.

— Selects items.

—

• Mutes the sound while listening to a source. If the source is “CD,”

“USB FRONT/USB REAR” or “iPod FRONT/iPod REAR,” playback

pauses. Press the control dial again to cancel muting or resume

playback.

• Confirms selection.

—• Enters repeat mode menu ( 11, 19, 28) directly if pressed

RPT.

• Enters random mode menu directly ( 11, 19, 28) if pressed

RND.

Selects the sound mode.

• Enters tone level adjustment directly ( 30) if pressed and held

EQ BASS-TRE on the main unit.

—

• Enters “Call Menu” screen* or answers incoming call when the unit

rings.

• Ends a call if pressed and held after a phone call conversation.

• Switches the connected mobile phone to the last connected

mobile phone if pressed and held. ( 18)

* If there is no call list, the unit beeps.

—

• Returns to the previous menu.

• Switches the controlling terminal for iPod playback if pressed and

held. ( 26, 35)

—Power off : Checks the current clock time.

Power on : Changes the display information and pattern.

8ENGLISH

Manual search

“M” appears, then

press the button

repeatedly.

When an FM stereo broadcast is

hard to receive

]

<Tuner>

]

]

<Mono>

Reception improves, but stereo effect

will be lost.

To restore the stereo effect, repeat the same

procedure to select <Stereo>.

Automatic presetting (FM)—

SSM (Strong-station Sequential Memory)

You can preset up to 18 stations for FM.

While listening to a station...

]

<Tuner>

]

<SSM>

]

<SSM 01 – 06 / SSM 07 – 12 /

SSM 13 – 18>

“SSM” appears and local stations with

the strongest signals are searched and

stored automatically.

To preset another 6 stations, repeat the above

procedure by selecting one of the other 6 SSM

setting ranges.

If an HD Radio tuner box is connected ( 22),

you can also search and store 6 stations for AM

by following the above operations.

[Hold]

Listening to the radio

]

“FM” or “AM”

lights up when receiving an FM stereo broadcast

with sufficient signal strength.

9ENGLISH

Manual presetting (FM/AM)

You can preset up to 18 stations for FM and 6

stations for AM.

Ex.: Storing FM station of 92.50 MHz into preset

number “4.”

]

“92.50MHz”

]

Shows the “Preset Mode” screen.

]

Selects preset number “4.”

“04” flashes.

• Pressing and holding the number buttons

(1 – 6) can also store the current station to the

selected number buttons (1 – 6).

Selecting a preset station

• Pressing the number buttons (1 – 6) can also

select the preset stations (1 – 6).

Using the remote controller

∞

: Changes the preset

stations

: Searches for stations

[Hold]

Title assignment

You can assign titles up to 30 station

frequencies (FM and AM) using 8 characters

(maximum) for each title.

• If you try to assign titles to more than 30

station frequencies, “Name Full” appears.

Delete unwanted titles before assignment.

• When HD Radio tuner box is connected

( 22), this feature will be disabled.

]

“FM” or “AM”

]

Shows the title entry screen.

]

Selects a character.

]

Moves to the next (or previous)

character position.

5Repeat steps 3and 4until you have

finished entering the title.

To erase the entire title, press and hold

DISP

after step 2, then press the control dial.

Available characters

A– Z(upper case), a– z(lower case), 0– 9

(numbers), and the following symbols:

!”#

$%&’()

*+,–./:;<

=>?@–'space

[Hold]

10 ENGLISH

Stopping playback and ejecting

the disc

“No Disc” appears.

Remove the disc, then press

SOURCE

to listen to another

playback source.

Prohibiting disc ejection

To cancel the prohibition, repeat the same

procedure.

Selects folder of the MP3/WMA

Selects track

Fast-forwards or

reverses the track

Listening to a disc

]

Turn on the power.

All tracks will be played repeatedly until you change

the source or eject the disc.

[Hold]

Selecting a folder/track on the

list

While listening to a disc....

]

Enter the list menu.

]

Select your desired item.

MP3/WMA: Select your desired folder,

then the desired track by repeating

this step.

• If the MP3/WMA disc contains many tracks,

you can fast search (±10, ±100, ±1000)

through the disc by turning the control dial

quickly.

• To return to the previous menu, press

BACK

Andere Handbücher für KW-XR810

Inhaltsverzeichnis

Andere JVC Autoempfänger Handbücher

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung