KAM Liteobar 126 Bedienungsanleitung

Liteobar 126

Colour changing RGB LED panel lighting effect

126 x 10mm RGB LEDs

42 x red, 42 x green, 42 x blue LEDs

Full DMX512 operation / 11 DMX channels

Auto mode / Sound-to-Light operation via built-in mic

Master/Slave modes / LED display

Tough metal chassis / adjustable metal hanging bracket

Twin safety chain loop / mains fused IEC in and out

Dimensions: 580 x 158 x 105mm (WxHxD)

Weight: 3.2Kg

M A N U A L V E R S I O N 1 . 0

21 / 04 / 11

For the latest instruction manual updates and information on the entire Kam range visit:

www.kam.co.uk

Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ

Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: [email protected] • Web: www.lambaplc.com

If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal.

Due to continuous product development, specifications and appearance are subject to change.

Thank you for purchasing this KAM product, we are sure that it will serve you for many years to come.

To optimise the performance of this product, please read these operating instructions carefully to familiarise yourself with the

basic operations of this unit. After you have read the instructions, please retain them for future reference.

This unit has been tested at the factory before being shipped to you.

To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture. To prevent a fire hazard, do not

expose the unit to any naked flame sources. Unplug this apparatus during lightning storms or if it is unlikely to be used for long

periods of time.

When installing the unit, please ensure you leave enough space around the unit for ventilation. Slots and openings in the unit are

provided for ventilation to ensure reliable operation of the product and to protect it from overheating. To prevent fire hazard, the

openings should never be blocked or covered.

Always handle the power cable by the plug. Never pull out the plug by pulling on the cable. Never touch the power cable when

your hands are wet as this could cause an electric shock. Do not tie a knot in the cable. The power cable should be placed such

that it is not likely to be stepped on. A damaged power cable can cause a fire or give you an electrical shock. Check

the power cord periodicaly, if you ever find that it is damaged, replace it before using the unit again. Contact your retailer for a

replacement.

The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area

where this unit is to be used meets the required written on the unit.

The lightning flash symbol inside a triangle is intended to alert the user to the presence high voltage within the unit’s

enclosure that may be of sufficient power to constitute a risk of electrical shock to persons.

Caution: to prevent the risk of electric shock, do not attempt to open the unit. No user-serviceable parts inside. Refer all

servicing to qualified service personnel.

The exclamation mark inside a triangle is intended to alert the user to the presence of important operating and

maintenance instructions in the literature accompanying the appliance.

Any modification carried out on the unit may invalidate the unit‟s warranty.

If applicable, only use the stand, tripod or bracket specified or sold with the apparatus.

Select the installation location of your unit carefully. Avoid placing it in direct sunlight or locations subject to vibration and

excessive dust. Do not use the unit where there are extremes in temperature (below 41ºF / 5ºC or exceeding 95ºF / 35ºC).

Unpacking and safety: Please unpack your new product carefully, your new product should reach you in perfect condition. Please

check that no damage has occurred during transit. If any damage is found, do not operate your unit. Please contact the retailer

you purchased it from immediately. If there is any damage to the mains cable do not use the device. Always disconnect the unit

from the mains supply when carrying out any servicing or cleaning of the unit.

The serial number for this equipment should be located on the rear or underside of the unit. Please make a note of this number as

you will need it for your warranty, it is a good idea to keep a copy of the serial number for your own records.

Rear view

1. Power link output 2. DMX Male Socket 3. DMX Female Socket 4. Audio Sensitivity 5. Mic

6. LCD display 7. Touch switch “MENU” 8. Touch switch “UP” 9. Touch switch “DOWN” 10. Power input

Installation methods

This unit can be fixed to a flat floor surface, wall or ceiling. If you choose to mount the unit please use the appropriate

equipment to ensure the unit is completely secured to the wall/ceiling to avoid any problems.

Flat surface installation

Hanging installation

Function

The unit has 3 main functions.

1. Auto mode 2. Sound mode 3. DMX mode

Insert the mains lead into the IEC socket on the rear panel. When the unit is switched on it will return to the original

setting. The display will first show „reset‟ and after 2 seconds, the unit will return to the working mode which it was last

set to.

Auto mode

Hold the “MENU” button until the mode has changed to the Auto mode.

Press the “MENU” button again to choose the separate functions within auto mode. Then by pressing the “UP” or

“DOWN” buttons you can change the value of the mode.

Mode specification

Prg XX (01-08): when the display shows Prg XX you can choose the program. There are 8 programs to choose

from. Use the up and down buttons to select the desired mode.

A u t m o d e

Prg XX

A u t m o d e

Spd XX

A u t m o d e

Stb XX

A u t m o d e

Fad XX

Spd XX (01-10): when the display shows Spd XX you can set the speed of the program. There are 10 speeds to

choose from. 01 is the fastest speed and 10 is the slowest speed. Use the up and down buttons to

select the desired speed.

Stb XX (01-10): when the display shows Stb XX use the up and down buttons to select the desired speed of the

Strobe. 00 value is no strobe.

Fad XX (01-10): when the display shows Fad XX use the up/down buttons to select desired speed of the

fade.There are 10 fade steps for you to choose from. 01 is the fastest fade and 10 is the slowest

fade.

Note: If you set up the strobe and fade together, the strobe will have priority. If the Stb or Fad is not set to 0 the fixture

will run the strobe mode not fade mode.

Audio mode

Hold the “MENU” button until the display changes to the Audio mode,

Press the “MENU” button again to choose the separate functions within audio mode. Then by pressing the “UP” or

“DOWN” buttons you can change the value of the mode.

Prg XX (01-08): when the display shows Prg XX you can choose the program. There are 8 programs to choose

from. Use the up and down buttons to select the desired mode.

Spd XX (01-10): when the display shows Spd XX you can set the speed of the program. There are 10 speeds to

choose from. 01 is the fastest speed and 10 is the slowest speed. Use the up and down buttons to

select the desired speed.

Stb XX (01-10): when the display shows Stb XX use the up and down buttons to select the desired speed of the

Strobe. 00 value is no strobe.

Fad XX (01-10): when the display shows Fad XX use the up and down buttons to select the desired speed of the

fade. There are 10 fade steps for you to choose from. 01 is the fastest fade and 10 is the slowest

fade.

Note: If you set up the strobe and fade together, the strobe will have priority. If the Stb or Fad is not set to 0 the fixture

will run the strobe mode not fade mode.

You can adjust the sound sensitivity of the unit by adjusting the control knob on the rear panel.

1. Master / Slave Mode without DMX controller

Only one unit must be set as the master unit.

By using the instructions above, set the master unit to the desired setting. For example, auto mode.

Slave units

Hold the “MENU” button until the mode has changed to the DMX mode. By pressing the “UP” or “DOWN” buttons

select the DMX value address of 001. This puts the unit into slave mode. All slave units must be set to 001.

Starting with the master unit, connect a 3 pin DMX cable to the DMX out socket of the master unit and then

connect the other end of the DMX lead to the input of the slave unit. Continue to link all slave units together as

shown below.

A u d m o d e

Prg XX

A u d m o d e

Spd XX

A u d m o d e

Stb XX

A u d m o d e

Fad XX

DMX control

DMX function chart

CH1

CH2

CH3

CH4

CH5

CH6

CH7

CH8

CH9

CH10

CH11

0 - 40

Black Out

41 - 80

Dimmer1

Flash

Red1

Green1

Blue1

Red2

Green2

Blue2

Red3

Green3

Blue3

81 - 120

Dimmer2

Flash

All

Red

All

Green

All

Blue

121 - 160

Color Flash

Flash

Color

161 - 200

Color Change

Speed

200 - 240

Color Flow

Speed

241 - 255

Dream Flow

Speed

Fade

DMX linking:

Each unit uses 11 DMX channels.

If control of all units is to be the same, each unit must have the same DMX address value.

Hold the “MENU” button until the mode has changed to the DMX mode. By pressing the “UP” or “DOWN” buttons

select the DMX value address. For example, if all units are set to DMX address 001 they will all display the same.

If individual control of each unit is required via a DMX controller, each unit must have its own DMX address and each

address must be at least 11 channels apart. For example, hold the “MENU” button until the mode has changed to the

DMX mode. By pressing the “UP” or “DOWN” buttons select the DMX value address. Set the first unit to 001 and

then the second unit to 012 and so on, each unit must be 11 channels apart. No unit channels must cross over.

Now control of each individual unit is available via the DMX controller.

DMX connector pin

Male & Female DMX connector pin: Pin1 = Gnd Pin2 = DMX- Pin3 = DMX+

Technical specification

No. of LEDs

126 x 10mm RGB LEDs

No. of each LEDs

42 x Red, 42 x Green, 42 x Blue

DMX operation

Full DMX512 operation

No. of DMX channels

11 DMX channels

Auto mode

Sound-to-Light

Sound-to-Light operation via built-in mic

Mic sensitivity

Variable mic sensitivity

Master/Slave mode

Master/Slave modes

LED display

Chassis

Tough metal chassis

Bracket

Adjustable metal hanging bracket

Safety chain

Twin safety chain loop

Mains

Mains fused IEC in and out

Dimensions (WxHxD) (mm)

580 x 158 x 105mm (WxHxD)

Weight (Kg)

3.2Kg

Inhaltsverzeichnis

Andere KAM DJ-Equipment Handbücher

KAM

KAM Mini Par 12 USB Bedienungsanleitung

KAM

KAM InfinityBeam Bedienungsanleitung

KAM

KAM Gobolaser 550RB Bedienungsanleitung

KAM

KAM LED Hexaflower 1 DMX Bedienungsanleitung

KAM

KAM DMX Star Cluster 3D Bedienungsanleitung

KAM

KAM Powercan70W Bedienungsanleitung

KAM

KAM Par Kit WFS Bedienungsanleitung

KAM

KAM LED PARTYBAR Bedienungsanleitung

KAM

KAM KCD3000 USB Bedienungsanleitung

KAM

KAM LED Superflower 1 DMX Bedienungsanleitung

KAM

KAM LED Quadtrix Bedienungsanleitung

KAM

KAM LED Quadbar 1 DMX Bedienungsanleitung

KAM

KAM LED Concept V2 Bedienungsanleitung

KAM

KAM LED Moonglow Bedienungsanleitung

KAM

KAM LED White192 Panel Bedienungsanleitung

KAM

KAM LED PAR 56 Bedienungsanleitung

KAM

KAM Derby FX-Bar Bedienungsanleitung

KAM

KAM Energy SD1 Bedienungsanleitung

KAM

KAM XY Laser Bedienungsanleitung

KAM

KAM LED Spiro 1 Bedienungsanleitung

KAM

KAM K-Strip12 Bedienungsanleitung

KAM

KAM dmx3 Bedienungsanleitung

KAM

KAM KSM Vegas LED Bedienungsanleitung

KAM

KAM FloodBank1 Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

Chauvet

Chauvet ovation B-2805FC Bedienungsanleitung