KanexPro HDBASE70POE Bedienungsanleitung

HDBASE70POE

4K HDBaseT Lite 70M – HDMI Extender w/Power over Ethernet

Version: HDBASE70POE_2014V1.3

KANEXPRO HDBASE70POE

Preface

Read this user manual carefully before using this product. Pictures displayed in this

manual are for reference only. Different models and specifications are subject to the

actual product.

This manual is only for operational instruction, not for any maintenance usage. The

functions described in this version are updated till Dec 2017. Any changes of functions

and parameters since then will be informed separately. Please refer to the dealers for

the latest details.

Trademarks

Product model and logo are trademarks. Any other trademarks mentioned in this

manual are acknowledged as the properties of the trademark owner. No part of this

publication may be copied or reproduced without the prior written consent.

FCC Statement

This equipment can generate, use, and radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. It has been tested and found to comply with the limits of a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a commercial

installation.

Operation of this equipment in a residential area is likely to cause interference, in which

case the user at their own expense will be required to take whatever measures may be

necessary to correct the interference

Any changes or modifications not expressly approved by the manufacture would void

the user’s authority to operate the equipment.

HDMI/IR/RS232 Twisted Pair PoC Extender

SAFETY PRECAUTIONS

To ensure the best from the product, please read all instructions carefully before using

the device. Save this manual for further reference.

Unpack the equipment carefully and save the original box and packing material for

potential future shipment.

Follow basic safety precautions to reduce the risk of fire, electrical shock and injury

to persons.

Do not dismantle the housing or modify the module. It may result in electrical shock

or burn.

Using supplies or parts not meeting the products’ specifications may cause

damage, deterioration or malfunction.

Refer all servicing to qualified service personnel.

To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not

install this product near water.

Do not place any heavy items on the extension cable in case of extrusion.

Do not remove the housing of the device as opening or removing housing may

expose you to dangerous voltage or other hazards.

Install the device in a place with fine ventilation to avoid damage caused by

overheating.

Keep the module away from liquids.

Spillage into the housing may result in fire, electrical shock, or equipment damage.

If an object or liquid falls or spills on to the housing, unplug the module immediately.

Do not twist/pull by force the ends of the optical cable. It can cause malfunction.

Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power

cord to the device before cleaning.

Unplug the power cord when left unused for an extended period.

Information on disposal for scrapped devices: Do not burn or mix with general

household waste; please treat the devices as normal electrical waste.

KANEXPRO HDBASE70POE

Table of Contents

1. Introduction .................................................................................................................1

1.1 Introduction to HDBASE70POE.........................................................................1

1.2 Features ............................................................................................................1

1.3 Package Contents .............................................................................................2

2. Introduction of Product Appearance............................................................................3

2.1 Appearance of HDMI Twisted Pair PoC Transmitter ..........................................3

2.2 Appearance of HDMI Twisted Pair PoC Receiver..............................................4

3. System Connection.....................................................................................................5

3.1 Usage Precautions ............................................................................................5

3.2 System Diagram ................................................................................................5

3.3 Connection Procedure.......................................................................................5

3.4 Application .........................................................................................................6

3.5 Twisted Pair Cable Connection..........................................................................6

3.6 Collocation Products..........................................................................................6

4. Specification ...............................................................................................................8

5. Panel Drawing ............................................................................................................9

6. Troubleshooting & Maintenance ...............................................................................10

7. After-sales Service....................................................................................................11

8. Warranty…………………………………………………………………………………….12

KANEXPRO HDBASE70POE

1. Introduction

1.1 Introduction to HDMI Twisted Pair PoC Extender

The KanexPro HDBASE70POE is a 4K compliant Transmitter-Receiver set

made to extend UltraHD 4K, digital audio, wide-band IR and power over

Ethernet (PoE) over a cost effective cat6a cable. It also supports computer

resolutions up to 1920x1200, HD1080P/60 with Deep Color. This HDCP

compliant extender routes distances up to 200 feet using HDBaseT™ Lite

technology.

As an added benefit to the systems integrator - the extender provides remote

power from either side Tx or Rx over the twisted pair connection, eliminating

the need for a separate power supply at the remote unit. Ideal for use in digital

signage applications, healthcare AV, control rooms, educational facilities,

airports, commanding centers and home theater.

1.2 Features

Two-way remote power: Tx to Rx or Rx to Tx using PoE (Power over Ethernet)

Route uncompressed HDMI signals over Single CAT6a

Extend up to 200 feet

Supports 4K UHD resolutions

Supports HDMI 1.4, 3D, and full HD 1080p/60

HDCP & EDID compliant

CEC Pass-through

Bi-directional IR & RS-232 for control

Supports all frequencies IR pass through, 5V & 12V, Crestron and Xantech IR

control signal compatible

Front panel LED’s for signal & power

Supports high bandwidth up to 10.2 Gbps

Compatible with HDMMX modular matrix switchers

One locking power supply included

Aluminum case enclosure with separate mounting ears

Backed by KanexPro 3-Year Parts and Labor Warranty

Note: Please use a CAT5e cable with low impedance (Shielded twisted pair will be

KANEXPRO HDBASE70POE

better and should be well grounded) for good transmission effect.

1.3 Package Contents

1 x HDMI Twisted Pair PoC Transmitter

1 x HDMI Twisted Pair PoC Receiver

4 x Mounting brackets (Separated from HDMI Twisted Pair PoC Extender)

8 x Plastic cushions

2 x RS232 cables

8 x Screws

2 x Power adapters (DC 24V)

1 x User manual

Notes:Please confirm if the product and the accessories are all included, if not,

please contact with the dealers.

KANEXPRO HDBASE70POE

2. Introduction of Product Appearance

2.1 Appearance of HDMI Twisted Pair PoC Transmitter

Figure 2-1 Appearances of HDMI Twisted Pair PoC Transmitter

1) ON: Working status indicator of this device. When the device works fine, this

green LED will keep blinking. And it will get off when the device stops work.

2) LINK: Twisted Pair Link status indicator, green LED. It will keep on when

connection is successful.

3) IN: When connected with devices support HDCP and work normally this LED will

keep on. If devices not support HDCP, this green LED will blink.

4) POWER LED: LED indicator of power. When connect with power, red LED will

keep on.

5) HDBT OUT: Connect to the HDBT IN port of HDMI Twisted Pair PoC Receiver

with a CAT5e cable.

6) HDMI IN: Connect to HDMI source.

7) IR IN: Connect with IR receiver, the IR signal received from this port can only

send out in HDMI Twisted Pair PoC Receiver.

8) IR OUT: Connect with IR sender, the sending IR signal are received from HDMI

Twisted Pair PoC Receiver.

9) RS232: RS232 connector.

10) DC 24V: Connect with power supply (Not necessary if HDMI Twisted Pair PoC

Receiver connects with power).

Note: Pictures shown on this manual are for reference only, different model and

specifications are subject to real product.

KANEXPRO HDBASE70POE

2.2 Appearance of HDMI Twisted Pair PoC Receiver

Figure 2-2 Appearances of HDMI Twisted Pair PoC Receiver

1) ON: Working status indicator of this device. When the device works fine, this

green LED will keep blinking. And it will get off when the device stops work.

2) LINK: Twisted Pair Link status indicator, green LED. It will keep on when

connection is successful.

3) OUT: When connected with devices support HDCP and work normally this LED

will keep on. If devices not support HDCP, this green LED will blink.

4) POWER LED: When connect with power, red LED will keep on.

5) HDBT IN: Connect to the HDBT OUT port of HDMI Twisted Pair PoC Transmitter

with a CAT5e cable.

6) HDMI IN: Connect to HDMI display device.

7) IR IN: Connect with IR receiver, the IR signal received from this port can only

send out in HDMI Twisted Pair PoC Transmitter.

8) IR OUT: Connect with IR emitter, the sending IR signal are received from HDMI

Twisted Pair PoC Transmitter.

9) RS232: RS232 connector.

10) DC 24V: Connect with power supply (Not necessary if HDMI Twisted Pair PoC

Transmitter connects with power).

Note: Pictures shown on this manual are for reference only, different model and

specifications are subject to real product.

KANEXPRO HDBASE70POE

3. System Connection

3.1 Usage Precautions

1) System should be installed in a clean environment and has a prop temperature and

humidity.

2) All the power switches, plugs, sockets and power cords should be insulated and

safety.

3) All devices should be connected before power on.

3.2 System Diagram

Figure 3-1 System Connection Diagram

3.3 Connection Procedure

Step1.Connect HDMI source (such as Blue-ray DVD) to HDMI IN port of transmitter

HDMI Twisted Pair PoC Transmitter with HDMI cable.

Step2.Connect HDBT OUT port of HDMI Twisted Pair PoC Transmitter and HDBT IN

port of HDMI Twisted Pair PoC Receiver, with single CAT5e/CAT6 cable.

Step3.Connect HDMI displayer (such as HDTV) to HDMI OUT port of HDMI Twisted

Pair PoC Receiver with HDMI cable.

Step4.Both HDMI Twisted Pair PoC Transmitter and HDMI Twisted Pair PoC Receiver

have IR IN and OUT. When one end is used as an IR receiver, the signal sent

from the end can only be transmitted via the other end.

For example: When “IR IN” of HDMI Twisted Pair PoC Transmitter connects

with an IR receiver, the IR transmitter must connect to IR OUT of HDMI Twisted

Pair PoC Receiver.

Step5.Connect the RS232 port of the devices to be controlled and the receiver or the

transmitter.

Step6.Connect with DC24V power adaptor(s) (One is enough if any end of HDMI

Twisted Pair PoC Transmitter and HDMI Twisted Pair PoC Receiver is

DVD

HDMI HDMI

CAT5e

INPUT Rs232

control panel

Projector

IR Remote

Receiver

Transmitter

KANEXPRO HDBASE70POE

connected with adapter as its PoC function).

3.4 Application

HDMI Twisted Pair PoC Extender has a good application in various occasions, such as

computer realm, monitoring, big screen displaying, meeting room, education and bank

& securities institution etc.

3.5 Twisted Pair Cable Connection

The twisted pair used in this extender MUST be a straight-through cable.

Notice: Cable connectors

MUST be metal one, the

shielded layer of cable

MUST be connected to the

connector’s metal shell, to

make a better

transmission.

3.6 Collocation Products

HDMI Twisted Pair PoC Extender usually work together with other devices to extend

the transmission distance of HDMI/IR/RS232 signal. Here are the most common

collocation products.

TIA/EIA T568A

TIA/EIA T568B

Cable color

green white

orange white

green

orange

orange white

green white

blue

blue white

orange

green

brown white

brown

1st

Ground

4--5

1st

Ground

4--5

2nd

Ground

3--6

2nd

Ground

1--2

3rd

Group

1--2

3rd

Group

3--6

4th

Group

7--8

4th

Group

7--8

Andere Handbücher für HDBASE70POE

Inhaltsverzeichnis

Andere KanexPro Extender Handbücher

KanexPro

KanexPro EXT-18GHDMIWL Bedienungsanleitung

KanexPro

KanexPro EXT-HDBT150M Bedienungsanleitung

KanexPro

KanexPro HDBase100M Bedienungsanleitung

KanexPro

KanexPro VGAEXTX2 Bedienungsanleitung

KanexPro

KanexPro HDEXT50M Bedienungsanleitung

KanexPro

KanexPro EXT-USB2100M Bedienungsanleitung

KanexPro

KanexPro EXT-100SL18G Bedienungsanleitung

KanexPro

KanexPro WP-EDUKIT4K Bedienungsanleitung

KanexPro

KanexPro EXT-50M18G Bedienungsanleitung

KanexPro

KanexPro EXT-70SL18G Bedienungsanleitung

KanexPro

KanexPro EXT-HDBASE70E Bedienungsanleitung

KanexPro

KanexPro WP-2X1HDUSBC Bedienungsanleitung

KanexPro

KanexPro EXT-HDMIKVM70M Bedienungsanleitung

KanexPro

KanexPro HDEXT50M Bedienungsanleitung

KanexPro

KanexPro EXT-HDBASE70E Bedienungsanleitung

KanexPro

KanexPro MPTP-T70S-H2 Bedienungsanleitung

KanexPro

KanexPro EXT-NETAVTX Bedienungsanleitung

KanexPro

KanexPro EXT-HD60M Bedienungsanleitung

KanexPro

KanexPro EXT-HDBTKVM100 Bedienungsanleitung

KanexPro

KanexPro HDBASE70POE Bedienungsanleitung

KanexPro

KanexPro VGAEXTX1 Bedienungsanleitung

KanexPro

KanexPro HDBASE100ME Bedienungsanleitung

KanexPro

KanexPro EXT-4KFIBERPRO Bedienungsanleitung

KanexPro

KanexPro EXT-HDBT70M Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung