Kanomax 6812 Bedienungsanleitung
TM
Model 6812™
VOLUME FLOW
ANEMOMETER
User Manual
TM
www. .com information@itm.com1.800.561.8187
TM
INTRODUCTION
Congratulations on your purchase of a 6812 Digital Anemometer with Volume
Calculation! You now own one of the most accurate, reliable, and highly
regarded airflow measurement instruments available today.
Kanomax’ s model 6812 digital anemometer is a versatile instrument for
measuring air velocity in various applications such as HVAC, aerospace
development, industrial process airflow, and fluids research.
Air Volume flow is automatically calculated in units of either cubic feet per
minute (ft3/min) or cubic meters per hour (m3/hr).
The rugged yet precise probes can be used for airstreams that have a wide range
of humidity, temperature and contaminants without compromising accuracy.
Features include choice of probe diameters, custom cable lengths, service
temperatures up to 212˚F (100˚C) at the probe, high reliability, and long life.
www. .com information@itm.com1.800.561.8187
TM
Warranty
This product is fully warranted against defective materials and/or
workmanship for a period of one year after purchase, provided it was not
improperly used. For your protection, please use this product as soon as
possible. If returned, it must be securely wrapped, sent prepaid and insured
Please include a note with name, address, telephone number and description
of the problem. Although we provide assistance on Kanomax products both
personally and through our literature, it is still the total responsibility of the
customer to determine the suitability of the product for use in their
application.
This manual is provided by Kanomax without any kind of warranty.
Precautions have been taken in accurately preparing this manual; however,
we neither assume responsibility for any omissions or errors that may
appear nor assume liability for any damages that result from the use of the
products in accordance with the information contained in the manual.
www. .com information@itm.com1.800.561.8187
TM
IMPORTANT SAFETY INFORMATION
Classifications
Danger: To Prevent Serious Injury or Death
Warnings in this classification indicate danger that may result in serious injury or death if
not observed.
Caution: To Prevent Damage to the Product
Warnings in this classification indicate risks of damage to the product that may void the
product warranty and/or calibration.
Description of Symbols
ESD Caution: To Prevent Damage to the Product
Warnings in this classification indicate risks of damage to the product that may void the
product warranty and/or calibration. Internal components are static sensitive and are not
user serviceable. Opening the cases by a non-authorized service center and/or in a non-
ESD safe environment may cause damage not covered by the manufacturer’s warranty.
Important: Mandatory Action Required
The specific action is given near this symbol.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not
occur in a particular situation.
www. .com information@itm.com1.800.561.8187
TM
IMPORTANT SAFETY INFORMATION (continued)
EU – Declaration of Conformity
Kanomax declares that the product for this manual complies with the essential
requirements and other relevant provisions of Directive 1999/5/EC. A copy of
the Declaration of conformity is available on request.
RoHS Statement
Concerning EU-Directive 2011/65/EU (RoHS 2), to the best of our knowledge,
based on supplier provided information, all Kanomax brand products, are not
intentionally manufactured or formulated with the following substances: Lead,
mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB),
polybrominated diphenyl ethers (PBDE). Minimal levels established in the 2005
RoHS Directive still apply under Article 4(2), Annex II: 0.1% by weight in
homogenous materials for lead, mercury, hexavalent chromium, polybrominated
biphenyls and polybrominated diphenyl ethers; 0.01% by weight in homogenous
materials for cadmium. Please be advised that we do not analyze for these
substances.
WEEE – Waste Electrical and Electronic Equipment - 2002/96/EC
Kanomax asks that all our products to be recycled at the end of their current use,
to comply with local waste requirements. Kanomax supports local Waste
Electrical and Electronic Equipment (WEEE) directives where they are in
operation. That means that WEEE may not be disposed as unsorted municipal
waste but is to be collected separately. Kanomax consumer products are
therefore labeled with a crossed-out “wheelie-bin” symbol which you can see
above. Further, all our products bear any other appropriate symbols for their
respective region. WEEE may contain hazardous substances which may
negatively affect the environment and human health when disposed of through
normal channels. Kanomax is committed to reduce the negative environmental
and human health effects of WEEE.
www. .com information@itm.com1.800.561.8187
TM
DANGER
Never touch the vane assembly blades and/or thermal sensors.
The vane assembly blades may contain sharp edges which may cause minor
cuts. The assembly contains precision bearings which are sensitive and the
blades are finely adjusted to specific pitches. Touching this assembly or its parts
may cause damage which can affect its operation and the calibration.
NOTE: If the vane assembly head or probe head requires cleaning we
recommend a fine mist of isopropyl alcohol and a fine long-haired brush or send
the unit in or servicing.
Do not disassemble or heat the batteries, or put them into a fire.
The may cause burns and the batteries may burst. Please dispose of used
batteries in the proper manner per local ordinances.
CAUTION
When measuring, ensure that the direction arrow is facing the
direction of airflow.
The arrow indicates the direction of airflow for the data provided on the calibration
certificate. It is meant to allow for uniform and consistent readings as per the provided
data. The probe will operate in the opposite direction but the data may be different.
Do not use or leave the instrument in a high temperature, high humidity,
high speed airflows or dusty environments for prolonged periods.
The instrument may not function properly out of the specified operating conditions and/or
have a greatly reduced operating life span.
Do not subject the instrument or the probe to strong impacts.
Dropping the instrument or the probe may cause damage or malfunction to the instrument
and may change the calibration data. We recommend sending it in immediately to be
checked.
www. .com information@itm.com1.800.561.8187
TM
CAUTION (continued)
Never disassemble, modify or repair the product.
Failure to observe the above may cause damage to the instrument or the probe. It may
also void the manufacturer’s warranty and calibration certificate.
Do not pick up or carry the instrument by the cable.
It may cause a malfunction or damage to the wiring of the cable.
Remove the batteries from the instrument when storing for long
periods of time. When inserting the batteries, be sure to insert them with the
polarity facing the correct direction.
Failure to do so may cause battery leakage and subsequent damage to the
instrument. The manufacturer does not recommend any specific brand of
batteries but a high-quality name brand alkaline battery seems to last the longest.
Do not wipe the instrument with a volatile solvent.
Use neutral solvents and simple cleaners to clean the instrument with a soft cloth.
Regularly check the head of the probe for contamination.
Impurities (such as dust) on the blades and/or thermal sensor may affect the
accuracy of the instrument.
NOTE: If the vane assembly head or probe head requires cleaning we
recommend a fine mist of isopropyl alcohol and a fine long-haired brush or send
the unit in or servicing.
When storing or shipping the instrument, the manufacturer recommends
disconnecting the cable(s) and returning it to the original carrying case.
www. .com information@itm.com1.800.561.8187
TM
SECTION 1 - SPECIFICATIONS
Ranges:
Probe AP275: 50 to 7800 ft/min (feet per minute)
0.2 to 40.00 m/sec (meters per second)
Air Probe AP100: 300 to 6890 ft/min (1.5 to 35.00 m/sec)
Calculated Air Volume Flow:
0.0 to 9999 ft3/min (cubic feet per minute)
0.0 to 9999 m3/hr (cubic meters per hour)
Accuracy: AP275: ±1.0% of reading ±1 digit
AP100: ±0.50 % full scale ±0.75% of reading ±1 digit
Resolution: 1 ft/min or 0.01 m/sec
0.1 ft3/min or 0.1 m3/hr
Operating Temperature:
Instrument: 32˚ to 125˚F (0˚ to 50˚C)
Probes: -4˚ to 212˚F (-20˚ to 100˚C)
Power Supply: 3 AA alkaline batteries
Battery Life: Approx. 150 hours, without backlight
Battery check: Automatic low battery display
Display: 0.5” LCD, 4 digits, with LED backlight
www. .com information@itm.com1.800.561.8187
TM
Options Available:
Protective Boot and Splash-Proof Seal for the Instrument
USB Communications
RS232 Communications
Analog 0-5 Volt Output
Additional Probes, AP275 or AP100
Extra extension and/or flexible rods
Custom cable lengths
Included:
(1) 6812 Instrument
(1) Vane-type probe head, choice of AP100 or AP275
(3) Rigid extension rods with handle grip
(1) Flexible extension rod
(1) Probe connection cable, 5 ft.
(3) Size AA 1.5V alkaline batteries (installed in instrument)
(1) Hard-shell carrying case with foam liner
(1) 6812 operation manual
Dimensions
INSTRUMENT
www. .com information@itm.com1.800.561.8187
TM
AP275 PROBE
AP100 PROBE
www. .com information@itm.com1.800.561.8187
Inhaltsverzeichnis
Andere Kanomax Messgerät Handbücher
Kanomax
Kanomax 3900 Bedienungsanleitung
Kanomax
Kanomax 3800 Bedienungsanleitung
Kanomax
Kanomax 3444 Bedienungsanleitung
Kanomax
Kanomax Fast CPC 3650 Bedienungsanleitung
Kanomax
Kanomax TABmaster 6720 Bedienungsanleitung
Kanomax
Kanomax S200 Series Bedienungsanleitung
Kanomax
Kanomax ANEMOMASTER A031 Bedienungsanleitung
Kanomax
Kanomax 3443 Bedienungsanleitung
Kanomax
Kanomax Anemomaster 6162 Bedienungsanleitung
Kanomax
Kanomax 6824 Bedienungsanleitung
Kanomax
Kanomax 3889 Bedienungsanleitung
Kanomax
Kanomax Climomaster S-6531-0E Bedienungsanleitung
Kanomax
Kanomax ANEMOMASTER A031 Bedienungsanleitung
Kanomax
Kanomax TABmaster Mini Bedienungsanleitung
Kanomax
Kanomax OMX-TDM Bedienungsanleitung
Kanomax
Kanomax Climomaster 6501 Series Bedienungsanleitung
Kanomax
Kanomax 2211 Bedienungsanleitung
Kanomax
Kanomax OMX-ADM Bedienungsanleitung
Kanomax
Kanomax 4200 Bedienungsanleitung
Kanomax
Kanomax 3300 Bedienungsanleitung
