Kenwood NEXEDGE NX-200 Bedienungsanleitung

09 08 07 06 05 04 03 02 01 00

NX-200/ NX-300

VHF DIGITAL TRANSCEIVER/

UHF DIGITAL TRANSCEIVER

INSTRUCTION MANUAL

ÉMETTEUR-RÉCEPTEUR NUMÉRIQUE VHF/

ÉMETTEUR-RÉCEPTEUR NUMÉRIQUE

UHF

MODE D’EMPLOI

TRANSCEPTOR DIGITAL VHF/

TRANSCEPTOR DIGITAL UHF

MANUAL DE INSTRUCCIONES

MIC

ABC

JKL

TUV

PQRS

DEF

MNO

WXYZ

GHI

NX-200-300_00_Cover.indd F-1NX-200-300_00_Cover.indd F-1 9/20/2007 9:29:18 AM9/20/2007 9:29:18 AM

VHF DIGITAL TRANSCEIVER/

UHF DIGITAL TRANSCEIVER

NX-200/ NX-300

INSTRUCTIoN MANUAL

ENGLISH

Thank You

We are grateful you have chosen Kenwood for your land

mobile radio applications. We believe this easy-to-use

transceiver will provide dependable communications to keep

personnel operating at peak efciency.

Kenwood transceivers incorporate the latest in advanced

technology. As a result, we feel strongly that you will be

pleased with the quality and features of this product

NXDNTM

NXDNTM is a protocol name for the new digital communication

system using 4-level FSK technology which has been co-

developed by Kenwood and Icom.

Models Covered bY This Manual

The models listed below are covered by this manual:

NX-200: VHF Digital Transceiver

NX-300: UHF Digital Transceiver

noTiCes To The user

◆Government law prohibits the operation of unlicensed radio

transmitters within the territories under government control.

◆ Illegal operation is punishable by ne and/or imprisonment.

◆ Refer service to qualied technicians only.

SAFETY: It is important that the operator is aware of and

understands hazards common to the operation of any

transceiver.

The AMBE+2TM voice coding Technology embodied in this product

is protected by intellectual property rights including patent rights,

copyrights and trade secrets of Digital Voice Systems, Inc. This

voice coding Technology is licensed solely for use within this

Communications Equipment. The user of this Technology is

explicitly prohibited from attempting to extract, remove, decompile,

reverse engineer, or disassemble the Object Code, or in any other

way convert the Object Code into a human-readable form. U.S.

Patent Nos. #5,870,405, #5,826,222, #5,754,974, #5,701,390,

#5,715,365, #5,649,050, #5,630,011, #5,581,656, #5,517,511,

#5,491,772, #5,247,579, #5,226,084 and #5,195,166.

One or more of the following statements may be applicable:

FCC WARNING

This equipment generates or uses radio frequency energy.

Changes or modifications to this equipment may cause harmful

interference unless the modifications are expressly approved in the

instruction manual. The user could lose the authority to operate this

equipment if an unauthorized change or modification is made.

INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY

THE FCC

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can generate radio

frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that the

interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of

the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment to an outlet on a circuit different from

that to which the receiver is connected.

•Consult the dealer for technical assistance.

The RBRC Recycle seal found on Kenwood

lithium-ion (Li-ion) battery packs indicates

Kenwood’s voluntary participation in an industry

program to collect and recycle Li-ion batteries

after their operating life has expired. The RBRC

program is an alternative to disposing Li-ion

batteries with your regular refuse or in municipal

waste streams, which is illegal in some areas.

For information on Li-ion battery recycling in your area, call (toll

free) 1-800-8-BATTERY (1-800-822-8837).

Kenwood’s involvement in this program is part of our commitment

to preserve our environment and conserve our natural resources.

Precautions

• Do not charge the transceiver and battery pack when they are wet.

• Ensure that there are no metallic items located between the

transceiver and the battery pack.

• Do not use options not specified by Kenwood.

• If the die-cast chassis or other transceiver part is damaged, do not

touch the damaged parts.

• If a headset or headphone is connected to the transceiver, reduce

the transceiver volume. Pay attention to the volume level when

turning the squelch off.

• Do not place the microphone cable around your neck while near

machinery that may catch the cable.

• Do not place the transceiver on unstable surfaces.

• Ensure that the end of the antenna does not touch your eyes.

• When the transceiver is used for transmission for many hours, the

radiator and chassis will become hot. Do not touch these locations

when replacing the battery pack.

• Do not immerse the transceiver in water.

• When water gets into the microphone opening or the speaker

grill, the voice level may become incoherent or distorted. Lightly

shake the transceiver to remove the water from the speaker and/or

microphone before operating the transceiver.

• Always switch the transceiver power off before installing optional

accessories.

iii

• Do not remove the black sheet from the reverse side of the

transceiver (refer to the illustration below). Removal of this

sheet decreases the waterproof efficiency of the transceiver and

may cause malfunctions if water seeps into the transceiver.

• The orange packing material on the reverse side of the

transceiver is important with respect to the waterproof efficiency

of the transceiver. Do not place stickers or other materials

on or around the packing material shown in the figure, or on

the reverse side of the battery pack. Doing so will impair the

waterproof efficiency of the transceiver and may cause it to

break down. Additionally, in order to prevent damage to the

packing material, do not allow it to come in contact with foreign

materials.

Turn the transceiver power off in the following locations:

• Near explosives or blasting sites.

• In aircrafts. (Any use of the transceiver must follow the

instructions and regulations provided by the airline crew.)

• Where restrictions or warnings are posted regarding the use of

radio devices, including but not limited to medical facilities.

• Near persons wearing pacemakers.

Turn the transceiver power off in the following locations,

unless the model is specifically qualified for such use

(Intrinsically Safe such as approved by Factory Mutual, CSA):

• In explosive atmospheres (inflammable gas, dust particles,

metallic powders, grain powders, etc.).

• While taking on fuel or while parked at gasoline service stations.

• Do not disassemble or modify the transceiver for any reason.

• Do not place the transceiver on or near airbag equipment while

the vehicle is running. When the airbag inflates, the transceiver

may be ejected and strike the driver or passengers.

• Do not transmit while touching the antenna terminal or if

any metallic parts are exposed from the antenna covering.

Transmitting at such a time may result in a high-frequency burn.

• If an abnormal odor or smoke is detected coming from the

transceiver, switch the transceiver power off immediately,

remove the battery pack from the transceiver, and contact your

Kenwood dealer.

• Use of the transceiver while you are driving may be against

traffic laws. Please check and observe the vehicle regulations

in your area.

• Do not expose the transceiver to extremely hot or cold

conditions.

• Do not carry the battery pack (or battery case) with metal

objects, as they may short the battery terminals.

CONTENTS

UNPACKING AND CHECKING EQUIPMENT ..............................1

Supplied AcceSSorieS ...............................................................1

PREPARATION ............................................................................2

BAttery pAck precAutionS .......................................................2

inStAlling/ removing the (optionAl) BAttery pAck....................7

inStAlling the (optionAl) AntennA ............................................8

inStAlling the Belt clip............................................................8

inStAlling the cAp over the univerSAl connector ...................9

inStAlling the (optionAl) SpeAker/ microphone or heAdSet ......9

GETTING ACQUAINTED ...........................................................10

diSplAy...................................................................................13

PROGRAMMABLE FUNCTIONS................................................15

BASIC OPERATIONS .................................................................18

Switching power on/ oFF ....................................................18

AdjuSting the volume.............................................................19

Selecting AZone And chAnnel/group id ................................19

trAnSmitting...........................................................................20

receiving................................................................................21

MENU MODE ..............................................................................23

menu AcceSS..........................................................................23

menu conFigurAtion ...............................................................24

chArActer entry ...................................................................26

SCAN...........................................................................................27

temporAry chAnnel lockout ..................................................27

priority ScAn.........................................................................28

ScAn revert ..........................................................................28

ScAn delete/Add....................................................................29

priority-chAnnel Select ........................................................29

FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION ......30

SelcAll (Selective cAlling)....................................................30

StAtuS meSSAge .....................................................................31

Short meSSAgeS.....................................................................33

long meSSAgeS ......................................................................33

gpS report ..........................................................................33

DTMF (DUAL TONE MULTI FREQUENCY) CALLS..................34

mAking AdtmF cAll..............................................................34

AutodiAl .................................................................................35

Stun code..............................................................................35

TRUNKING CALLS (ANALOG)...................................................36

mAking Atelephone cAll........................................................36

receiving Atelephone cAll ....................................................36

EMERGENCY CALLS.................................................................37

SCRAMBLER ..............................................................................38

Secure (encrypted) trAnSmiSSion ..........................................38

SIGNALING.................................................................................39

Quiet tAlk (Qt)/ digitAl Quiet tAlk (dQt) ............................39

rAdio AcceSS numBer (rAn)..................................................40

optionAl SignAling .................................................................40

viBrAtor.................................................................................40

VOICE OPERATED TRANSMISSION (VOX) ............................41

voX gAin level .....................................................................41

voX operAtion ......................................................................42

CLOCK ........................................................................................43

clock AdjuStment ..................................................................43

BACKGROUND OPERATIONS ..................................................44

time-out timer (tot).............................................................44

BAttery SAver........................................................................44

key lock ................................................................................45

low BAttery wArning ............................................................45

SignAl Strength indicAtor .....................................................45

compAnder .............................................................................46

BuSy chAnnel lockout (Bcl).................................................46

control chAnnel hunt...........................................................46

ptt id...................................................................................47

VGS-1 OPTIONAL VOICE GUIDE & STORAGE UNIT..............48

voice recorder .....................................................................48

voice guide............................................................................49

UNPACKING AND CHECKING EQUIPMENT

Note: The following unpacking instructions are for use by your

Kenwood dealer, an authorized Kenwood service facility, or the

factory.

Carefully unpack the transceiver. We recommend that you

identify the items listed in the following table before discarding

the packing material. If any items are missing or have

been damaged during shipment, file a claim with the carrier

immediately.

Supplied AcceSSorieS

Item Part Number Quantity

Belt clip J29-0730-XX 1

• Screws for belt clip N30-3008-XX 2

Universal connector cap B09-0712-XX 1

•

Dressing screw (preassembled)

N08-0564-XX 1

• Packing (preassembled)

G53-1769-XX

Instruction manual B62-2014-XX 1

Belt clip + screws Universal

connector cap

Andere Handbücher für NEXEDGE NX-200

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kenwood Transceiver Handbücher

Kenwood

Kenwood TS-700A Bedienungsanleitung

Kenwood

Kenwood TH-41A Bedienungsanleitung

Kenwood

Kenwood TS-930S Bedienungsanleitung

Kenwood

Kenwood TK-7360 Bedienungsanleitung

Kenwood

Kenwood ProTalk TK-3401D Bedienungsanleitung

Kenwood

Kenwood TM-211A Bedienungsanleitung

Kenwood

Kenwood NEXEDGE NX-200 Bedienungsanleitung

Kenwood

Kenwood TH-G71E Bedienungsanleitung

Kenwood

Kenwood TM-3530A Bedienungsanleitung

Kenwood

Kenwood NX-5700 Bedienungsanleitung

Kenwood

Kenwood TS-50S Bedienungsanleitung

Kenwood

Kenwood TS-570D, TS-570S Bedienungsanleitung

Kenwood

Kenwood TR-751A Bedienungsanleitung

Kenwood

Kenwood TM-2570 Bedienungsanleitung

Kenwood

Kenwood TK-980 Bedienungsanleitung

Kenwood

Kenwood TK-290 Bedienungsanleitung

Kenwood

Kenwood TK-3170 Bedienungsanleitung

Kenwood

Kenwood TK-760G series Bedienungsanleitung

Kenwood

Kenwood TK-7302 Bedienungsanleitung

Kenwood

Kenwood TK-5720 Bedienungsanleitung

Kenwood

Kenwood TK-3202 Bedienungsanleitung

Kenwood

Kenwood TK-880 series Bedienungsanleitung

Kenwood

Kenwood TK-7160 Bedienungsanleitung

Kenwood

Kenwood TM-201A Bedienungsanleitung

Beliebte Transceiver Handbücher anderer Marken

Yaesu

Yaesu FT-7B Bedienungsanleitung

Mizuho

Mizuho MX-2 Produkthandbuch

Blitz

Blitz MJ-398U Bedienungsanleitung

Utilicom

Utilicom LongRanger 2050 Bedienungsanleitung

Standart

Standart HX290UKA Bedienungsanleitung

Altronix

Altronix Pace1PTM Bedienungsanleitung

Kirisun

Kirisun PT2208 Bedienungsanleitung

ELECRAFT

ELECRAFT KX2 Bedienungsanleitung

Zodiac

Zodiac K3 Bedienungsanleitung

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Bedienungsanleitung

Siemens

Siemens PSO 4000 Bedienungsanleitung

Midland

Midland G8E-BT Handbuch

ComNav

ComNav Mariner X2 Bedienungsanleitung

Uniden

Uniden UH820 Series Bedienungsanleitung

Standard Horizon

Standard Horizon HX320E Bedienungsanleitung

Em-Trak

Em-Trak A100 Bedienungsanleitung

HPE

HPE Aruba QSFP28 Bedienungsanleitung

RADTEL

RADTEL RT-490 Bedienungsanleitung