Key Digital KD-PS22UTx Bedienungsanleitung

4K 18G 328ft (100m) HDMI over HDBaseT Extender,

2x1 Switcher with 2 HDMI Inputs, 2 Mirrored Outputs

(HDBaseT, HDMI), USB 2.0, LAN, Audio De-Embed,

IR, RS-232, IP Control, PoH, CEC Manager

™

(Tx Only)

The Experts in Digital Video Technology and Solutions™

Operating Instructions

KD-PS22UTx

KEY DIGITAL

APP READY

Table of Contents

Quick Setup Guide ............................................................... 2

Application Example .............................................................. 3

Connections, Buttons, and LEDs...................................................... 7

TCP/IP Commands .............................................................. 14

Speciﬁcations .................................................................. 16

Important Product Warnings & Safety Instructions: ....................................... 17

Contacting Key Digital ............................................................ 17

Warranty Information............................................................. 17

Always follow the instructions provided in this Operating Manual.

Please visit www.keydigital.com for the latest product documentation and software

downloads. Product features and speciﬁcations are subject to change without notice.

Introduction

KD-PS22UTx is an HDBaseT transmitter + presentation switcher + soft-codec enabling interface with

two HDMI inputs, as well as two USB-A connections, and one USB-B connection. The KD-PS22UTx also

includes a local pass-through output for an additional display. KD-PS22UTx is ideal for professional

video installations in conference rooms, classrooms, lecture halls, auditoriums, as well as audio return

/ ARC applications. KD-PS22UTx is natively received by KD-X100MRx black box HDBaseT Rx or by

KD-UPS52U Presentation Switcher. The KD-PS22UTx and both Rx options have audio de-embedding

for ease of integration with audio systems. Additional Key Digital Presentation Switchers also support

integration with KD-PS22UTx. KD-PS22UTx features push-button or TCP/IP switching selection of

the desired source and is KD-App Ready. KD-PS22UTx is HDCP 2.2 compliant and supports 4K/UHD

24/25/30/60 (4:4:4) resolutions with up to 18Gbps bandwidth. 4K/UHD signals are extended up to

100m / 328ft and 1080p up to 150m / 492ft via single CAT5e/6 cable. In addition to AV signals,

KD-PS22UTx extends USB 2.0, IR, RS-232, and LAN for controlling remotely located equipment.

Default IP Address: 192.168.1.239, Port 23

Key Features

›Presentation Switching: 2 HDMI Source selection by push button or IP control.

›Rx Options: Native integration with KD-X100MRx black box HDBaseT Rx or KD-UPS52U Presentation

Switchers.

›Soft-Codec Enabling System: USB Host + Device ports on wall plate and chosen Rx / Presentation

Switch create connectivity hub for professional USB cameras and microphones, audio DSP, keyboard,

mouse, or touchscreen display with connected computer

›KDPlug & Present: Add KD-CX800 to build programming-free automation system for room display

on / off, screen control, auto switching, KD-CAMUSB PTZ camera, KD-AMP220 amp with mic mix,

and common video source control

›Ultra HD/4K: Supports up to 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to

18Gbps bandwidth)

›Visually Lossless Compression: 18G enabling technology applied to all video formats exceeding

10.2Gbps to accommodate HDBaseT transmission channel

›10G Pass-thru: Mode enables uncompressed 10.2Gbps signal extension

›Auto-Sensing: Automatic selection of newly detected source and switching from newly disconnected

source when enabled

›KD-App Ready: Network scan & detect populates pre-built GUI including connected display/projector

controls via CEC Manager™

›HDCP Licensing: Fully licensed and compatible with HDCP 2.2

›HDR10 and Dolby Vision: More life-like images through a greater range of luminance levels

›Power Over HDBaseT: Unit powered by Rx/Presentation Switch unit

›Signal Extension: For resolution and cable quality

»4K/UHD (18G): Up to 100m / 328ft

»1080p: Up to 150m / 492ft (Long Range Mode)

›Long Range Mode: Extends 1080p signals up to 152m (500 ft.) using CAT5e/6

(UHD/4K not supported)

›Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit

›Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication to

source & display, EDID Control handshake, and Hot Plug Detection Voltage

›EDID Management: Internal library with 15 internal EDID handshakes including 4K with HDR in

addition to native EDID data copied from the Rx display/device

›IR Bi-Directional control: Tx supports IR input via the included IR sensor and output via the

included IR emitter

›RS-232: Bi-Directional control to/from Tx and Rx/Presentation Switch unit

›Unit Control Mode: Provides TCP/IP control and status of/from Tx unit

›Surround Sound Audio: Supports Dolby®TrueHD, Dolby®Digital Plus, Dolby Atmos®, and DTS-HD

Master Audio™multi-channel audio formats

›Control System Support: Key Digital®App Ready. Key Digital Management Software™Pro

(KDMS™Pro) ready, Compass Control®Pro ready. Fully controllable by all IR, RS-232, and TCP/IP

supported control systems via open API.

Included Accessories

»IR sensor (qty 1); IR emitter (qty 1)

»KD-PS50W48VC 50W power supply (48V/1.04A) (Qty1)

»L-Bracket (qty 2); Ear Mount Screw (qty 4)

»6-pin phoenix terminal (qty 1); 3-pin phoenix terminal (qty 1)

»6 ft USB Micro cable (qty 1); 6 ft USB A to B data cable (qty 1)

Quick Setup Guide

Rx UNITS SOLD SEPARATELY. Go to Presentation Solutions section for compatible Rx models.

CONNECT:

You MUST use the Power Supply provided with your unit or you VOID the Key Digital®

Warranty and risk damage to your unit and associated equipment.

Begin with the KD-PS22UTx, KD-UPS52U (sold separately), KD-X100MRX (sold separately), USB

camera (sold separately), all input/output devices, and audio system powered off

1. Connect HDMI sources to the input ports of KD-PS22UTx unit

2. (Optional) Connect HDMI, Display Port, USB-C, VGA sources to presentation switcher (sold

separately). Port connectivity varies by presentation switcher model.

3. Connect HDMI displays / projectors to the HDMI output port of the RX unit / presentation switcher

4. Connect USB devices into desired USB A ports or USB host computer to desired USB B ports at

KD-PS22UTx, HDBaseT Rx, or presentation switcher.

»Note: When using KD-UPS52U presentation switcher the connection location of the USB devices

and host is determined by the USB mode selection switch. Please refer to KD-UPS52U Quick Setup

Guide for more information.

5. Connect CAT5e/6 cabling to Tx and Rx unit / presentation switch. Use 568-B standard termination

on both ends, avoiding couplers, and excess CAT cable length

6. To send the selected audio source into audio systems, connect from the analog or digital audio de-

embed outputs of the KD-PS22UTx / Rx unit / presentation switcher

7. Connect control system or PC to LAN port of the KD-PS22UTx, Presentation Switch or Rx unit for

network connectivity

8. Connect IR/RS-232 wiring from control system into IR/RS-232 pass-thru ports of KD-PS22UTx and

IR/RS-232 ports of the Presentation Switcher / Rx unit.

9. Screw-in power supply to the KD-PS22UTx, KD-UPS52U or KD-X100MRx unit. Only 1 power

connection is needed. Then, connect power to outlets.

10. Power on HDMI sources and displays, audio systems, connected computers, USB devices and hosts

Application Example

Integration with KD-UPS52U:

USB

AppleTVLaptop 1 Laptop 2 Signage

(USB-C)

PC (DisplayPort)

KD-X100MRx

KD-PS22UTx

Presentation Switcher KD-PS42 with KD-AMP220

DSP/Mixer

Cable/Satellite

USB-C

HDMI

USB

HDMI

WiFi Router

Up to 328 ft (100m)

RS-232

WiFi

Audio

KD-AMP220

Input Control Vol

Mic Mute

Line BassL/R PCM

Treble

KD-AMP220

KEY DIGITAL

APP READY

TCP/IP

HDBT

TCP/IP

KD-UPS52U

KD-CAMUSB

DisplayPort

USB

CONFIGURE:

All software conﬁguration for the system is done via Key Digital Management Software™Pro

(KDMS™Pro) that can be downloaded here: KDMS™Pro Download

1. Connect to KD-PS22UTx from your PC using the USB micro port

on the face of the unit

2. Open KDMS

™

Pro software are perform a USB Device scan (ﬁg. 1):

3. Choose the device from the Devices window (ﬁg. 2a)

4. Set the desired Device Name in the KD-PS22UTx Information window (ﬁg. 2b)

5. In the Network Settings section of the Properties window, enter the desired IP settings (ﬁg. 2c)

»a. IP Address (default is 192.168.1.239)

»b. Subnet Mask (default is 255.255.255.0)

»c. Gateway (default is 192.168.1.1)

»d. Port (default is 23)

»i. Note: If using KD-App, please do not change the port number.

6. Save (ﬁg. 2d)

7. If using KD-App or KDMS for control, set the desired Input/Output names by entering the Input/

Output Settings section of the properties window, and selecting the Change Input/Output Name

button (ﬁg. 3a), selecting the desired input/output and entering the name (ﬁg. 3b)

8. Set the EDID rotary to position “A” for 4K video with 2ch audio. Choose setting “4”

for 1080p video with 2ch audio. Refer to the Connections, Buttons, and LEDs

section for more options and information.

9. Additional settings may be adjusted in the KDMS software. Full access to all

settings/commands is achieved via terminal session using Tera Term or PuTTy

software.

10. Your unit is now ready to control from the KDMS Control Panel, KD-App, or by professional

control system.

CONTROL:

Option 1: Control via Push Button

›Input Select

»a. Alternates between Inputs 1 and 2

»b. Auto Switching is enabled via Control rotary

Option 2: Control via KD-App, Key Digital Management Software™

›KD-PS22UTx is controllable by:

»Key Digital’s user-friendly iOS App (downloadable in the App Store)

»Key Digital Management Software™(downloadable here).

›Conﬁguration Steps:

»Connect and conﬁgure KD-PS22UTx as described in this Quick Setup Guide.

»Download and open KD-App and/or KDMS™

»Ensure the iOS device and/or PC computer are on the same network with KD-PS22UTx

»Perform a network scan in the KD-App/KDMS™

»Select and control the selected KD-PS22UTx

Option 3: Control via professional control system

KD-PS22UTx allows control over TCP/IP interface for bi-directional communication. You may connect to

the LAN port of the KD-PS22UTx, KD-X100MRx, or KD-UPS52U to deliver network connectivity to the Key

Digital devices.

Default IP Address: 192.168.1.239, Port 23

›For TCP/IP control, the default static IP address is 192.168.1.239, with port 23

›RS-232 connection is used for control pass-thru to connected devices, not for unit control of the

KD-PS22UTx

›For the past 10 years, most Key Digital switches have supported a standard audio+video switching

command. KD-PS22UTx is also controllable by this command, so if you have previously integrated

Key Digital switches by third-party control systems you may have success using the same driver/

module.

»Switching – Video + Audio together (two commands supported)

»SPO01SIyy - yy = input number (01-02)

»SPOSIyy - yy = input number (01-02)

Connections, Buttons, and LEDs

›HDMI Inputs: Using an HDMI cable, connect your HDMI sources.

»Supports up to UHD/4K @ 50/60 fps [4:4:4], 18Gbps

»See Supported Standard 4K Video Formats table below

»Supports HDR10 and Dolby Vision

»Compliant with HDCP 2.2 and previous

»Supports lossless compressed audio formats including

Dolby®TrueHD, Dolby®Digital Plus, DTS-

HD Master Audio™, and Dolby®Atmos

»Does not support CEC pass through from display connected to Rx unit / presentation switch

»Active light to the left of each port illuminates when there is an active HDMI signal passing through.

Supported standard 4K Video Formats:

Resolution Bandwidth

1 4K@24/25/30 [4:4:4] 8bit < 10.2Gbps

2 4K@24/25/30 [4:2:2] 8/10/12bit < 10.2Gbps

3 4K@50/60 [4:2:0] 8bit < 10.2Gbps

4 4K@24/25/30 [4:4:4] 10/12bit < 18Gbps

5 4K@50/60 [4:2:2] 8/10/12bit < 18Gbps

6 4K@50/60 [4:2:0] 10/12bit < 18Gbps

7 4K@50/60 [4:4:4] 8bit < 18Gbps

›HDMI Pass-through: Provides a local output for the selected input. Allows for one additional display

to be connected near the sources

»Active light to the left illuminates when there is HPD from display

›Power, Link, Video LEDs: Indicate system connectivity status

»Power (red) illuminates solid with proper powering from Rx unit / presentation switch

»Link (blue) illuminates solid from healthy HDBaseT connectivity with Rx unit / presentation switch

»Video (green) illuminates solid with active HDMI signal

»Live (yellow) steady blinking indicates active CPU

›USB Device Ports

»Supports USB2.0 and previous

»2 USB Device ports are included, and can be used simultaneously

»Used for connecting USB endpoints (ie web cam, keyboard, mouse)

»Not used for connecting USB hosts (ie computer)

»Supports connectivity to USB hubs but may not exceed 15 endpoint devices

»Provides 5V 500mA power

»Use USB toggle switch to determine if KD-PS22UTx will be used to connect a USB host (USB-B port)

or USB device (USB-A port). Both host and device are not simultaneously possible.

Inhaltsverzeichnis

Andere Key Digital Extender Handbücher

Key Digital

Key Digital KD-CAT5XHDMI Bedienungsanleitung

Key Digital

Key Digital KD-X600ProK Bedienungsanleitung

Key Digital

Key Digital FATCAT Series Bedienungsanleitung

Key Digital

Key Digital KD-X444LP Bedienungsanleitung

Key Digital

Key Digital KD-X222PO Bedienungsanleitung

Key Digital

Key Digital KD-CAT5XCAT5 Bedienungsanleitung

Key Digital

Key Digital KD-HDMIXCAT5 Bedienungsanleitung

Key Digital

Key Digital KD-X422POA Bedienungsanleitung

Key Digital

Key Digital KD-XUSB2 Bedienungsanleitung

Key Digital

Key Digital KD-X222 Bedienungsanleitung

Key Digital

Key Digital KD-HDFIX22 Bedienungsanleitung

Key Digital

Key Digital Phantom KD-HDDA1X1 Bedienungsanleitung

Key Digital

Key Digital KD-X444SP Bedienungsanleitung

Key Digital

Key Digital KD-CATHD300Lite Bedienungsanleitung

Key Digital

Key Digital KD-CAT5XHDMI Bedienungsanleitung

Key Digital

Key Digital KD-FIX418 Bedienungsanleitung

Key Digital

Key Digital KD-4KWHCEX Bedienungsanleitung

Key Digital

Key Digital KD-HDB150 Bedienungsanleitung

Key Digital

Key Digital KD-X444LP Bedienungsanleitung

Key Digital

Key Digital KD-X444L Bedienungsanleitung

Key Digital

Key Digital PRO Connect PCBKDCATHD Tx Bedienungsanleitung

Key Digital

Key Digital Phantom KD-HD1X1ProK Bedienungsanleitung

Key Digital

Key Digital KD-HDB150 Bedienungsanleitung

Key Digital

Key Digital Black Bull KD-CATDRV Tx Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung