4 Keysight 81610A/11A/12A/13A/14A Return Loss Module,
Edition 6
Notices
This document contains proprietary information that is
protected by copyright. All rights are reserved.
No part of this document may reproduced in (including
electronic storage and retrieval or translation into a foreign
language) without prior agreement and written consent from
Keysight Technologies Deutschland GmbH as governed by
United States and international copywright laws.
©Copyright 2000, 2015 by:
Keysight Technologies Deutschland GmbH
Herrenberger Str. 130
71034 Böblingen
Germany
Subject Matter
The material in this document is subject to change without
notice.
Keysight Technologies makes no warranty of any kind with
regard to this printed material, including, but not limited to, the
implied warranties of merchantability and fitness for a
particular purpose.
Keysight Technologies shall not be liable for errors contained
herein or for incidental or consequential damages in connection
with the furnishing, performance, or use of this material.
Printing History
New editions are complete revisions of the guide reflecting
alterations in the functionality of the instrument. Updates are
occasionally made to the guide between editions. The date on
the title page changes when an updated guide is published. To
find out the current revision of the guide, or to purchase an
updated guide, contact your Keysight Technologies
representative.
Control Serial Number: First Edition applies directly to all
instruments.
Warranty
This Keysight Technologies instrument product is warranted
against defects in material and workmanship for a period of one
year from date of shipment. During the warranty period,
Keysight will, at its option, either repair or replace products that
prove to be defective.
For warranty service or repair, this product must be returned to
a service facility designated by Keysight. Buyer shall prepay
shipping charges to Keysight and Keysight shall pay shipping
charges to return the product to Buyer. However, Buyer shall
pay all shipping charges, duties, and taxes for products returned
to Keysight from another country.
Keysight warrants that its software and firmware designated by
Keysight for use with an instrument will execute its
programming instructions when properly installed on that
instrument. Keysight does not warrant that the operation of the
instrument, software, or firmware will be uninterrupted or error
free.
Limitation of Warranty
The foregoing warranty shall not apply to defects resulting from
improper or inadequate maintenance by Buyer, Buyer-supplied
software or interfacing, unauthorized modification or misuse,
operation outside of the environmental specifications for the
product, or improper site preparation or maintenance.
No other warranty is expressed or implied. Keysight
Technologies specifically disclaims the implied warranties of
Merchantability and Fitness for a Particular Purpose.
Exclusive Remedies
The remedies provided herein are Buyer’s sole and exclusive
remedies. Keysight Technologies shall not be liable for any
direct, indirect, special, incidental, or consequential damages
whether based on contract, tort, or any other legal theory.
Assistance
Product maintenance agreements and other customer assistance
agreements are available for Keysight Technologies products.
For any assistance contact your nearest Keysight Technologies
Sales and Service Office.
Certification
Keysight Technologies certifies that this product met its
published specifications at the time of shipment from the
factory.
Keysight Technologies further certifies that its calibration
measurements are traceable to the United States National
Institute of Standards and Technology, NIST (formerly the
United States National Bureau of Standards, NBS) to the extent
allowed by the Institutes’s calibration facility, and to the
calibration facilities of other International Standards
Organization members.
ISO 9001 Certification
Produced to ISO 9001 international quality system standard as
part of our objective of continually increasing customer
satisfaction through improved process control.
Edition 6:
81610-90A15
February 2015
Edition 1:
81610-90014 E0900
September 2000
Edition 2:
81610-90014 E1000
October 2000
Edition 3:
81610-90014 E0201
February 2001
Edition 4:
81610-90014 E0401
April 2001
Edition 5:
81610-90A15
February 2002
