Keysight Technologies B1500A Installationsanleitung
Keysight Technologies B1500A
Semiconductor Device Analyzer
Self-paced
Training Manual
Notices
© Keysight Technologies 2005-2014
No part of this manual may be reproduced in
any form or by any means (including elec-
tronic storage and retrieval or translation
into a foreign language) without prior agree-
ment and written consent from Keysight
Technologies as governed by United States
and international copyright laws.
Manual Part Number
B1500-90040
Edition
Edition 1, September 2005
Edition 2, May 2006
Edition 3, January 2007
Edition 4, June 2007
Edition 5, February 2008
Edition 6, October 2008
Edition 7, November 2009
Edition 8, August 2014
Keysight Technologies
1400 Fountaingrove Parkway
Santa Rosa, CA 95403
Warranty
The material contained in this docu-
ment is provided “as is,” and is subject
to being changed, without notice, in
future ed itions. Further, to the maxi-
mum extent permitted by applicable
law, Keysight disclaims all warranties,
either express or implied, with regard
to this manual and any information
contained herein, including but not
limited to the implied warranties of
merchantability and fitness for a par-
ticular purpose. Keysight shall not be
liable for errors or for incidental or
consequential damages in connection
with the furnishing, use, or perfor-
mance of this document or of any infor-
mation contained herein. Should
Keysight and the user have a separate
written agreement with warranty terms
covering the material in this document
that conflict with these terms, the war-
ranty terms in the separate agreement
shall control.
Technology Licenses
The hardware and/or software described in
this document are furnished under a license
and may be used or copied only in accor-
dance with the terms of such license.
Restricted Rights Legend
If software is for use in the performance of a
U.S. Government prime contract or subcon-
tract, Software is delivered and licensed as
“Commercial computer software” as defined
in DFAR 252.227-7014 (June 1995), or as a
“commercial item” as defined in FAR
2.101(a) or as “Restricted computer soft-
ware” as defined in FAR 52.227-19 (June
1987) or any equivalent agency regulation or
contract clause. Use, duplication or disclo-
sure of Software is subject to Keysight Tech-
nologies’ standard commercial license
terms, and non-DOD Departments and
Agencies of the U.S. Government will receive
no greater than Restricted Rights as defined
in FAR 52.227-19(c)(1-2) (June 1987). U.S.
Government users will receive no greater
than Limited Rights as defined in FAR
52.227-14 (June 1987) or DFAR
252.227-7015 (b)(2) (November 1995), as
applicable in any technical data.
In This Manual
This documentis the self-paced training manual to help you to understand what is Keysight
B1500A, what functions the B1500A has, how to use the B1500A, and what applications
the B1500A contributes to.
• Module 1. Introduction
This module explains the product concept and the key features of the B1500A/
EasyEXPERT. You will learn about what is the B1500A.
• Module 2. Basic Measurement
This module explains the basic I-V sweep measurement function and the cabling and
fixturing issues. You will learn how to measure I-V curves in the course exercises.
• Module 3. Low Current Measurement
This module explains the low current measurement technique. You will learn how to
measure the low current in the course exercises.
• Module 4. Capacitance Measurement
This module explains the capacitance measurement function. You will learn how to
measure the capacitance in a course exercise.
• Module 5. SPGU Control and Applications
This module explains the SPGU Control classic test. You will learn how to create the
classic test setup and the applications using SPGU in the course exercises.
Class Exercises
Class exercises use the test setup listed below. The test setup data are only examples and
included in the Demo.xpg file stored in Keysight B1500 Series Product Reference
CD-ROM.
NOTE
Demo.xpg file
Demo.xpg file is required to create the Demo preset group which contains the test setup
data used by the class exercises. And it is stored in the \data folder on Keysight B1500
Series Product Reference CD-ROM.
The Demo preset group should be created before starting the class exercise. To create the
preset group, launch EasyEXPERT and import the file by using the Preset Group Import
dialog box opened by clicking My Favorite Setup > Preset Group > Import Preset Group.
The test setup data are only examples for the class exercises.
Module Exercise Device Test setup/definition/data Page
Module 1 no exercise
Module 2 Id-Vd measurement MOSFET IDVD, Id-Vd 2-7
Id-Vd measurement MOSFET Trace IdVd 2-10
Id-Vd measurement MOSFET Trace IdVd 2-16
SMU series connection 511 kohm IRVR 2-28
SMU parallel connection 1 ohm Parallel 2-32
SMU series resistor 511 kohm IV-res 2-37
Re measurement, kelvin connection Bipolar Tr REKELV 2-50
Module 3 Leak current measurement -Zero-check 3-9
Ultra low current measurement -Zero-check-ASU 3-19
Id-Vg measurement MOSFET IDVG 3-20
Gummel plot Bipolar Tr GUMMEL 3-25
Module 4 C-V sweep measurement MOSFET CV-1MHz 4-6
Module 5 Charge pumping MOSFET Charge Pumping 4T 0.1V
step 5-20
Flash memory MOSFET Demo-S-NorFlash
Endurance 5-29
ALWG output 511 kohm ALWG monitor 5-36
NOTE
.xtd files
The \data folder stores some .xtd files. They are the application test definitions used by
some class exercises. To use the definition file, import the file by using the Test Definition
Import dialog box opened by clicking Library > Import Test Definition. The test definition
data are only examples for the class exercises.
NOTE
.xtr files
The \data folder also stores some .xtr files. They are the sample test results created by
executing the test setup which has the same name as the result data. To display these
sample test results, import the files by using the Test Result Import dialog box opened by
clicking Results > Transport Data > Import.
NOTE
About sample data
The test setup data described in this manual are only examples. If these example data
damage your devices, Keysight is NOT LIABLE for the damage.
Required Devices for Class Exercises
To perform the class exercises, you need the device set (Keysight part number
04156-87001) which contains the following devices.
Description Quantity
N-channel MOSFET 2 ea.
NPN Bipolar Transistor 1 ea.
Red Miniature LED 1 ea.
0.1 F Capacitor 50 V 1 ea.
1.0 Resistor 1/8 W 1 ea.
1.1 kResistor 1/8 W 1 ea.
511 kResistor 1/8 W 1 ea.
NPN bipolar TransistorN-ch MOSFET LED
1 ohm Resistor
Brown
Black
Black
Silver
1.1 kohm Resistor
Brown
Brown
Black
Brown
511 kohm Resistor
Green
Brown
Brown
Orange
0.1 uF Capacitor
Required Accessories for Class Exercises
To perform the class exercises, you need the following accessories. Prepare the accessories
shown below.
Designation Description Model No. Qty.
1Test Fixture a16442A or
16442B
(B1500A-A5F)
a. The 16058A Test Fixture for the 4145A/B may be substituted for the
16442A/B Test Fixture. If you use the 16058A, you also need the 16435A
Interlock Adapter.
1 ea.
28 pin socket module 1 ea.
Connection wire 6 ea.
2Triaxial Cable 16494A 4 ea.
3Interlock Cable 16493J 1 ea.
4Kelvin Triaxial Cable, for Module 2 16493K 1 ea.
5CMU Cable, for Module 4 N1300A 1 ea.
6Atto Sense/Switch Unit, for Module 3 E5288A 1 ea.
ASU control cable, triax cable, for Module 3 16493M 1 ea.
16442A/B Test Fixture (1ea.)
Triaxial Cable (4ea.)
INTLK Cable (1ea.)
Connection Wire (6ea.)
28 pin DIP Socket Module (1ea.)
2
3
1
4
5CMU Cable (1ea.)
6
E5288A ASU (1ea.)
Triaxial Cable (1ea.)
Control Cable (1ea.)
Kelvin Triaxial Cable (1ea.)
To perform the flash memory class exercise in Module 5 and if you use the ASU, you need
the following accessories.
To perform the flash memory class exercise in Module 5 and if you use the selector, you
need the following accessories.
Description Model No. Qty.
ASU (Atto Sense/Switch Unit) with control cable E5288A Total
3sets
Triaxial Cable 16494A or
equivalent Total
7ea.
BNC-SMA Cable 16493P 3 ea.
SMA-SMA Cable, for synchronization of SPGU 16493Q 2 ea.
Description Model No. Qty.
SMU/PG selector with control cable 16440A
(B1500A-A04) 2 sets
Selector adapter with control cable 16445A 1 set
Triaxial Cable 16494A or
equivalent Total
7ea.
BNC-SMA Cable 16493P 3 ea.
SMA-SMA Cable, for synchronization of SPGU 16493Q 2 ea.
Andere Handbücher für B1500A
4
Inhaltsverzeichnis
Andere Keysight Technologies Messgerät Handbücher
Keysight Technologies
Keysight Technologies B1505A Bedienungsanleitung
Keysight Technologies
Keysight Technologies FieldFox N9913A Bedienungsanleitung
Keysight Technologies
Keysight Technologies N4960A Bedienungsanleitung
Keysight Technologies
Keysight Technologies W3301A Bedienungsanleitung
Keysight Technologies
Keysight Technologies IntegraVision PA2200 Series Service-Handbuch
Keysight Technologies
Keysight Technologies Agilent Technologies PXI Express M9202A Benutzerhandbuch
Keysight Technologies
Keysight Technologies E5072A Bedienungsanleitung
Keysight Technologies
Keysight Technologies U9361F Bedienungsanleitung
Keysight Technologies
Keysight Technologies P Series Betriebsanleitung
Keysight Technologies
Keysight Technologies B1505A Bedienungsanleitung
Keysight Technologies
Keysight Technologies i7090 Bedienungsanleitung
Keysight Technologies
Keysight Technologies N5245-60106 Installations- und Betriebshandbuch
Keysight Technologies
Keysight Technologies MXA N9020A-508 Bedienungsanleitung
Keysight Technologies
Keysight Technologies U1701B Bedienungsanleitung
Keysight Technologies
Keysight Technologies E5868A Montageanleitung
Keysight Technologies
Keysight Technologies E4981A Betriebsanleitung
Keysight Technologies
Keysight Technologies M9203A Kurzanleitung
Keysight Technologies
Keysight Technologies BT2152A Service-Handbuch
Keysight Technologies
Keysight Technologies B1500A Bedienungsanleitung
Keysight Technologies
Keysight Technologies UXA N9040B Bedienungsanleitung
