Keysight Technologies UXR Series Bedienungsanleitung

Keysight UXR-Series and

MXR/EXR-Series MultiScope

Hardware

Configuration

Guide

Notices

No part of this manual may be reproduced in

any form or by any means (including

electronic storage and retrieval or

translation into a foreign language) without

prior agreement and written consent from

Keysight Technologies, Inc. as governed by

United States and international copyright

laws.

Manual Part Number

54964-97024

Edition

Fourth edition, April 2021

Available in electronic format only

Published by:

Keysight Technologies, Inc.

1900 Garden of the Gods Road

Colorado Springs, CO 80907 USA

Warranty

The material contained in this document is

provided "as is," and is subject to being

changed, without notice, in future editions.

Further, to the maximum extent permitted

by applicable law, Keysight disclaims all

warranties, either express or implied, with

regard to this manual and any information

contained herein, including but not limited

to the implied warranties of

merchantability and fitness for a particular

purpose. Keysight shall not be liable for

errors or for incidental or consequential

damages in connection with the furnishing,

use, or performance of this document or of

any information contained herein. Should

Keysight and the user have a separate

written agreement with warranty terms

covering the material in this document that

conflict with these terms, the warranty

terms in the separate agreement shall

control.

Technology License

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in

accordance with the terms of such license.

U.S. Government Rights

The Software is "commercial computer

software," as defined by Federal Acquisition

Regulation ("FAR") 2.101. Pursuant to FAR

12.212 and 27.405-3 and Department of

Defense FAR Supplement ("DFARS")

227.7202, the U.S. government acquires

commercial computer software under the

same terms by which the software is

customarily provided to the public.

Accordingly, Keysight provides the Software

to U.S. government customers under its

standard commercial license, which is

embodied in its End User License Agreement

(EULA), a copy of which can be found at

www.keysight.com/find/sweula. The

license set forth in the EULA represents the

exclusive authority by which the U.S.

government may use, modify, distribute, or

disclose the Software. The EULA and the

license set forth therein, does not require or

permit, among other things, that Keysight:

(1) Furnish technical information related to

commercial computer software or

commercial computer software

documentation that is not customarily

provided to the public; or (2) Relinquish to,

or otherwise provide, the government rights

in excess of these rights customarily

provided to the public to use, modify,

reproduce, release, perform, display, or

disclose commercial computer software or

commercial computer software

documentation. No additional government

requirements beyond those set forth in the

EULA shall apply, except to the extent that

those terms, rights, or licenses are explicitly

required from all providers of commercial

computer software pursuant to the FAR and

the DFARS and are set forth specifically in

writing elsewhere in the EULA. Keysight

shall be under no obligation to update,

revise or otherwise modify the Software.

With respect to any technical data as

defined by FAR 2.101, pursuant to FAR

12.211 and 27.404.2 and DFARS 227.7102,

the U.S. government acquires no greater

than Limited Rights as defined in FAR 27.401

or DFAR 227.7103-5 (c), as applicable in any

technical data.

Safety Notices

This product has been designed and tested

in accordance with accepted industry

standards, and has been supplied in a safe

condition. The documentation contains

information and warnings that must be

followed by the user to ensure safe

operation and to maintain the product in a

safe condition.

CAUTION

A CAUTION notice denotes a hazard.

It calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly

performed or adhered to, could

result in personal injury or death.

Do not proceed beyond a WARNING

notice until the indicated

conditions are fully understood and

met.

Keysight UXR-Series and MXR/EXR-Series MultiScope Hardware Configuration Guide 3

MultiScope Hardware Configuration, UXR-Series—At a Glance

In one equipment rack, you can connect multiple Infiniium UXR-Series

oscilloscopes together to create an oscilloscope system with up to 20-channels.

Oscilloscopes

Required

Infiniium UXR-Series oscilloscopes:

• Each oscilloscope adds four or two input channels. You can connect up to five

oscilloscopes in a rack.

• The MultiScope system is synchronized using the Cal Out signal on the second

(follower #1) oscilloscope, power divider, and a synchronization port

(channel 4, for example) on all oscilloscopes.

Expansion

Accessories

As you configure MultiScope systems made up of UXR-Series oscilloscopes,

expansion accessories containing the necessary cables, adapters, and power

dividers are required:

• N2164A UXR-Series Multi-Frame Base Kit (First Two Frames).

• N2165A UXR-Series Multi-Frame Expansion Kit (Add One Frame).

The N2164A and N2165A rack mount expansion accessories are set up so that you

can expand your system one oscilloscope at a time.

NOTE

The Infiniium UXR-Series oscilloscope software supports up to 40 channels in a MultiScope

system. If you are interested in configuring a two-rack, 40-channel UXR-Series MultiScope

system, contact Keysight for more information.

Figure 1 Expansion Accessories Required for Four-Oscilloscope Rack Mount System

UXR-Series

oscilloscope

UXR-Series

oscilloscope

N2164A

2-oscilloscope

kit for rack

UXR-Series

oscilloscope

N2165A

1 oscilloscope

expansion kit

UXR-Series

oscilloscope

N2165A

1 oscilloscope

expansion kit

Rack

2-oscilloscope

rack mount system

3-oscilloscope

rack mount system

4-oscilloscope

rack mount system

4 Keysight UXR-Series and MXR/EXR-Series MultiScope Hardware

For example, to set up a four-oscilloscope system, your configuration would

include one N2164A kit (to go from one oscilloscope to two) and two N2165A kits

(to go from two oscilloscopes to three and then from three oscilloscopes to four).

See Figure 1.

MultiScope

Control Software

To control MultiScope systems and analyze captured data, you can use:

• Infiniium oscilloscope software on the Leader oscilloscope. MultiScope

software is included as a standard feature.

• D9010BSEO Infiniium Offline oscilloscope analysis software on an external host

computer. MultiScope software is included as a standard feature.

This software allows time-synchronized acquisitions for multiple-oscilloscope

systems with very low oscilloscope-to-oscilloscope jitter and drift. This software

can be used to configure, capture, and store real-time voltage signals.

Not Included MultiScope systems also require:

•Equipmentrack.

• Rack mount kits (N2156A) for each oscilloscope in the rack.

• Remote interface connection between the system running the MultiScope

control software (either the Leader oscilloscope or an external host computer)

and each oscilloscope in the system (for controlling the individual oscilloscopes

and moving captured data to the host computer).

Ethernet LAN or instrument USB are the most common interface options used.

Keysight UXR-Series and MXR/EXR-Series MultiScope Hardware Configuration Guide 5

MultiScope Hardware Configuration, MXR/EXR-Series—At a Glance

You can connect two Infiniium MXR/EXR-Series oscilloscopes together to create

an oscilloscope system with up to 16 channels.

Oscilloscopes

Required

Infiniium MXR/EXR-Series oscilloscopes:

• Each oscilloscope adds eight or four input channels. You can connect two

oscilloscopes in a rack.

•TheMultiScopesystemissynchronized using the AUX OUT signal on the second

(follower #1) oscilloscope, power divider, and a synchronization port

(channel 4, for example) on both oscilloscopes.

Expansion

Accessories

For MultiScope systems made up of two MXR/EXR-Series oscilloscopes, this

multi-frame cable kit is available:

• N2124A Multi-Frame Cable Kit for Two MXR/EXR-Series Oscilloscopes.

Not Included MultiScope systems also require:

• Equipment rack(s).

• Rackmount kits for the oscilloscopes (MXR2RACK for MXR-Series or

EXR2RACK for EXR-Series).

• MultiScope control software.

• Remote interface connection between host computer and the each

oscilloscope in the system (for controlling the individual oscilloscopes and

moving captured data to the host computer).

Ethernet LAN and instrument USB are the most common interface options

used.

MultiScope

Control Software

To control MultiScope systems and analyze captured data, you can use:

• Infiniium oscilloscope software on the Leader oscilloscope. MultiScope

software is now included as a standard feature.

• D9010BSEO Infiniium Offline oscilloscope analysis software on a host

computer. MultiScope software is now included as a standard feature.

This software allows time-synchronized acquisitions for multiple-oscilloscope

systems with very low oscilloscope-to-oscilloscope jitter and drift. This software

can be used to configure, capture, and store real-time voltage signals.

6 Keysight UXR-Series and MXR/EXR-Series MultiScope Hardware

In This Guide

This guide describes the equipment required to configure MultiScope systems and

shows you how to set up and connect the equipment:

•Chapter 1, “MultiScope System Requirements,” starting on page 9.

Depending on the UXR-Series oscilloscope bandwidths and number of channels

required, you will use one of the configurations shown in the following table.

Depending on the MXR/EXR-Series oscilloscope bandwidths and number of

channels required, you will use one of the configurations shown in the following

table.

After you have set up and connected the MultiScope system, see:

•Chapter 5, “Next Steps,” starting on page 27.

See Also • The Infiniium UXR-Series oscilloscope software’s online help for information on

using the MultiScope Hosted Instruments software.

# of channels

required (4-ch

oscilloscopes)

# of channels

required (2-ch

oscilloscopes)

Configuration required See:

5-8 3-4 2-oscilloscope configuration Chapter 2, “Two-Oscilloscope System,

UXR-Series,” starting on page 11 (that can be

expanded later).

9-20 5-10 3-to-5-oscilloscope

configuration (1 rack)

Chapter 3, “Three- to Five-Oscilloscope Systems,

UXR-Series,” starting on page 17.

# of channels

required (8-ch

oscilloscopes)

# of channels

required (4-ch

oscilloscopes)

Configuration required See:

9-16 5-8 2-oscilloscope configuration Chapter 4, “Two-Oscilloscope System,

MXR/EXR-Series,” starting on page 23 (that can be

expanded later).

Keysight UXR-Series and MXR/EXR-Series MultiScope Hardware Configuration Guide 7

Contents

MultiScope Hardware Configuration, UXR-Series—At a Glance / 3

MultiScope Hardware Configuration, MXR/EXR-Series—At a Glance / 5

In This Guide / 6

1 MultiScope System Requirements

2 Two-Oscilloscope System, UXR-Series

Expansion Equipment Required / 11

Mounting Oscilloscopes in Rack / 12

Connecting the Equipment / 13

Parts in the N2164A (Two in Rack) Expansion Kit / 13

Connecting the Oscilloscopes / 14

3 Three- to Five-Oscilloscope Systems, UXR-Series

Expansion Equipment Required / 18

Mounting Oscilloscopes in Rack / 19

Connecting the Equipment / 20

Parts in the N2165A (Add One) Expansion Kit / 20

Connecting the Follower #2 Through Follower #4 Oscilloscopes / 21

4 Two-Oscilloscope System, MXR/EXR-Series

MXR/EXR-Series Oscilloscope Requirements / 24

Parts in the N2124A Multi-Frame Cable Kit / 24

Connections / 25

Connections for Synchronization / 25

Connections for Reference Clock Skew Calibration / 26

Next Steps / 26

5 Next Steps

Individually Calibrate the Oscilloscopes in the MultiScope System / 27

UXR-Series MultiScope Calibration Connections / 28

Use MultiScope Control Software / 30

8 Keysight UXR-Series and MXR/EXR-Series MultiScope Hardware Configuration Guide

Infiniium Oscilloscope Software on the Leader Oscilloscope / 30

D9010BSEO Infiniium Offline Oscilloscope Analysis Software / 30

Go To “Using Hosted Infiniium Oscilloscopes” in the Online Help / 31

Index

Keysight UXR-Series and MXR/EXR-Series MultiScope

Hardware Configuration Guide

1 MultiScope System

Requirements

This chapter describes the requirements for MultiScope systems, including

oscilloscopes, environmental, and rack.

Oscilloscopes are sensitive measurement instruments, and some environmental

conditions must be present to ensure that the oscilloscope delivers the best

possible measurement accuracy.

For UXR-Series MultiScope systems, refer to the Infiniium UXR-Series Real-Time

Oscilloscopes User’s Guide for information on power requirements, airflow/cooling

requirements, and rack/cabinet requirements.

For MXR/EXR-Series MultiScope systems, refer to the Infiniium MXR/EXR-Series

Real-Time Oscilloscopes User’s Guide for information on power requirements,

airflow/cooling requirements, and rack/cabinet requirements.

10 Keysight UXR-Series and MXR/EXR-Series MultiScope Hardware Configuration Guide

1MultiScope System Requirements

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Keysight Technologies Prüfgeräte Handbücher

Keysight Technologies

Keysight Technologies N5990A-301 Bedienungsanleitung

Keysight Technologies

Keysight Technologies 16117B Bedienungsanleitung

Keysight Technologies

Keysight Technologies N5224AU-401 Installations- und Betriebshandbuch

Keysight Technologies

Keysight Technologies 85054B Handbuch

Keysight Technologies

Keysight Technologies B1542A Pulsed IV Package Bedienungsanleitung

Keysight Technologies

Keysight Technologies N5511A Bedienungsanleitung

Keysight Technologies

Keysight Technologies N7015A Bedienungsanleitung

Keysight Technologies

Keysight Technologies U3020AS16 Handbuch

Keysight Technologies

Keysight Technologies 81960A Bedienungsanleitung

Keysight Technologies

Keysight Technologies N4891A Bedienungsanleitung

Keysight Technologies

Keysight Technologies Infiniium V Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies ZA0060A Bedienungsanleitung

Keysight Technologies

Keysight Technologies U1610/20A Bedienungsanleitung

Keysight Technologies

Keysight Technologies 85033E Fehlerbehebungshandbuch

Keysight Technologies

Keysight Technologies DP001 A Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies 85051B Handbuch

Keysight Technologies

Keysight Technologies U1818A Service-Handbuch

Keysight Technologies

Keysight Technologies 85055A Handbuch

Keysight Technologies

Keysight Technologies PD1500A Kurzanleitung

Keysight Technologies

Keysight Technologies N9910X-888 Bedienungsanleitung

Keysight Technologies

Keysight Technologies InfiniiVision MSO-X 4022A Handbuch

Keysight Technologies

Keysight Technologies N1091 CA Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies N5991 Bedienungsanleitung

Keysight Technologies

Keysight Technologies PNA-X N524xB Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung