Keysight Technologies N9330B Bedienungsanleitung

Keysight

N9330B Handheld

Cable & Antenna Tester

User’s Guide

Notice: This document contains references to

Agilent. Please note that Agilent’s Test and

Measurement business has become Keysight

Technologies. For more information, go to

www.keysight.com.

Notices

2009-2014

No part of this manual may be

reproduced in any form or by any

means (including electronic storage

and retrieval or translation into a

foreign language) without prior

agreement and written consent from

Keysight Technologies, Inc. as

governed by United States and

international copyright laws.

Trademark Acknowledgments

Manual Part Number

N9330-90011

Edition

Edition 2, July 2014

Printed in China

Published by:

Keysight Technologies

No 116 Tianfu 4th street

Chiengdu, 610041 China

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED “AS IS,”

AND IS SUBJECT TO BEING

CHANGED, WITHOUT NOTICE, IN

FUTURE EDITIONS. FURTHER, TO

THE MAXIMUM EXTENT PERMITTED

BY APPLICABLE LAW, KEYSIGHT

DISCLAIMS ALL WARRANTIES,

EITHER EXPRESS OR IMPLIED WITH

REGARD TO THIS MANUAL AND

ANY INFORMATION CONTAINED

HEREIN, INCLUDING BUT NOT

LIMITED TO THE IMPLIED

WARRANTIES OF

MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE.

KEYSIGHT SHALL NOT BE LIABLE

FOR ERRORS OR FOR INCIDENTAL

OR CONSEQUENTIAL DAMAGES IN

CONNECTION WITH THE

FURNISHING, USE, OR

PERFORMANCE OF THIS

DOCUMENT OR ANY INFORMATION

CONTAINED HEREIN. SHOULD

KEYSIGHT AND THE USER HAVE A

SEPARATE WRITTEN AGREEMENT

WITH WARRANTY TERMS

COVERING THE MATERIAL IN THIS

DOCUMENT THAT CONFLICT WITH

THESE TERMS, THE WARRANTY

TERMS IN THE SEPARATE

AGREEMENT WILL CONTROL.

Technology Licenses

The hardware and/or software

described in this document are

furnished under a license and may be

used or copied only in accordance

with the terms of such license.

U.S. Government Rights

The Software is “commercial

computer software,” as defined

by Federal Acquisition Regulation

(“FAR”) 2.101. Pursuant to FAR

12.212 and 27.405-3 and

Department of Defense FAR

Supplement (“DFARS”) 227.7202,

the U.S. government acquires

commercial computer software

under the same terms by which

the software is customarily

provided to the public.

Accordingly, Keysight provides

the Software to U.S. government

customers under its standard

commercial license, which is

embodied in its End User License

Agreement (EULA), a copy of

which can be found at

http://www.keysight.com/find/sweula

The license set forth in the EULA

represents the exclusive authority

by which the U.S. government

may use, modify, distribute, or

disclose the Software. The EULA

and the license set forth therein,

does not require or permit,

among other things, that

Keysight: (1) Furnish technical

information related to

commercial computer software

or commercial computer

software documentation that is

not customarily provided to the

public; or (2) Relinquish to, or

otherwise provide, the

government rights in excess of

these rights customarily provided

to the public to use, modify,

reproduce, release, perform,

display, or disclose commercial

computer software or

commercial computer software

documentation. No additional

government requirements

beyond those set forth in the

EULA shall apply, except to the

extent that those terms, rights, or

licenses are explicitly required

from all providers of commercial

computer software pursuant to

the FAR and the DFARS and are

set forth specifically in writing

elsewhere in the EULA. Keysight

shall be under no obligation to

update, revise or otherwise

modify the Software. With

respect to any technical data as

defined by FAR 2.101, pursuant

to FAR 12.211 and 27.404.2 and

DFARS 227.7102, the U.S.

government acquires no greater

than Limited Rights as defined in

FAR 27.401 or DFAR 227.7103-5

(c), as applicable in any technical

data.

Safety Notices

A CAUTION notice denotes a hazard. It

calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or adhered

to, could result in damage to the

product or loss of important data. Do

not proceed beyond a CAUTION

notice until the indicated conditions

are fully understood and met.

A WARNING notice denotes a hazard.

It calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or adhered

to, could result in personal injury or

death. Do not proceed beyond a

WARNING notice until the indicated

conditions are fully understood and

met.

1 Overview

Introduction 2

Basic measurement functionality 2

Front Panel Overview 4

Top Panel Overview 5

Instrument Markings 6

2 Getting Started

Checking the Shipment 8

Safety Considerations 9

Electrical Requirements 11

Electrostatic Discharge (ESD) Precautions 11

Power Requirements 12

Working with Batteries 14

Installing a Battery 14

Viewing Battery Status 14

Your first 10 minutes with the N9330B 16

Power on the N9330B 16

Making the first measurement 17

South Korea Class A EMC Declaration 22

3 Making Measurements

Selecting a Measurement Mode 24

Calibrate the N9330B before making measurements 25

Calibration Mode 25

Types of Calibrators 26

Measuring Return Loss/SWR/Cable Loss 29

Perform a basic return loss measurement 29

Adjusting the measurement resolution 30

Using Marker/Limit 30

Measuring Distance to Fault (DTF) 31

Perform a DTF measurement 31

Adjusting the measurement resolution 32

Using Marker/Limit 32

Contents

Measured distance 33

Making an Average Power Measurement 34

Making a Basic Average Power Measurement 35

Figure 3-1. Connection with base station 36

4 Using Functions

Using Markers and Pass/Fail Limit Lines 40

Using markers 40

Using Pass/Fail Limit Lines 41

Processing Traces 43

Trace Operation 43

Trace overlap 44

Saving and Recalling a file 45

Save a trace data 45

Save an instrument setup 46

Copy a screen 46

Editing a file name 47

Recall a trace data 47

Recall an instrument setup 48

Viewing system statistics 49

Check system status 49

Running a self test 49

Some Helpful Hints 50

Preset the tester 50

Adjust amplitude scale 51

Using single sweep 51

Enabling interference immunity 51

Quick access to freq/dist setups 52

Connector Care 52

System Setups 58

Setting screen resolution 58

Setting power manager 58

Choosing a unit 58

Setting date and time 59

Firmware upgrade 59

Key light setting 59

Setting the brightness of key light 60

Light Setting 60

5KeyReference

AMPTD 62

Top 62

CAL 64

Bypass Electronic Calibrator 64

Distance 66

Start 66

Stop 66

DTF Config 67

Cable Loss 68

Velocity Factor 68

Cable 69

Window 69

Enter and ESC/CLR 70

Enter 70

ESC/CLR 70

Frequency 71

Start 71

Stop 71

Signal Standard 71

Limit 72

Limit 1 72

Limit 2 72

Limit Beep 73

Marker 74

Marker 1...6 74

Marker All off 75

Meas/View 76

Resolution 76

Single 76

IIM (Interference Immunity) 76

Trace Overlap 77

Mode 78

Power Meter 78

System 84

Cal Mode 84

Power Manager 84

Units 84

Language 84

Clock 84

Status 85

Self Test 85

E Calib Test 85

Intelligent 85

License Option 86

Key Light 86

Key Light Edit 86

Light Set 86

6 Instrument Messages

Error Message List 88

Warning List 89

7 Menu Map

FREQ/DIST 92

AMPTD 93

MEAS/VIEW 94

SYS 95

LIMIT 96

Marker 97

Documentation Conventions:

1. A pair of curly brackets { } indicates a softkey, for example

{Start} refers to the Start softkey.

2. A pair of square brackets [ ] indicates a hardkey, 

for example, [ENTER] refers to the ENTER hardkey.

3. “DUT” refers to a device under test.

Overview

1Overview

Overview

Introduction

Keysight has designed the N9330B handheld cable and

antenna tester (25 MHz to 4 GHz) to simplify the job of

installing and maintaining cable and antenna systems. In

addition to measuring SWR, Return Loss and Cable

Loss, the N9330B also performs Distance-to-Fault (DTF)

measurements that assist in determining cable defect

locations, It is also useful in identifying maintenance

necessary to maintain peak performance of your cable

and antenna systems.

Basic measurement functionality

Basic measurement functionality of the N9330B

includes:

•SWR

• Return loss

•Cableloss

• DTF (SWR and return loss)

• Power Meter (option PWM)

Overview

Introduction

Optimized Usabilities

The Keysight N9330B has the following features:

• 6.5-inch TFT colorful LCD screen (640×480 pixels)

enables you to read the scans easily and clearly

outdoors.

• Rechargeable lithium-ion battery supports a

minimum of four hours continuous operation when

fully charged.

• Print-screen button for quick screen capture and easy

file saving onto the memory stick.

• Auto file naming makes editing file names fast and

easy.

• The light sensor adjusts the display brightness

according to the environment to save power.

• USB interface for easy and fast file saving to PC or

memory stick.

• User definable power saving mode.

• Back-lit keys make you find the right keys in darkness

easily.

• Arc-shaped handles and a rugged rubber casing

ensure a comfortable and firm hold.

Overview

Front Panel Overview

N9330B

Handheld Cable & Antenna Tester

25 M H z - 4.0 GHz

ENT ER

1ABC 2DEF 3GHI

4JKL 5MNO 6PQR

7STU 8VWX 9YZ_

0SAVE

MODE FREQ/

DIST AMPTD MEAS/

VIEW SYS HOLD/

RUN LIM IT M ARKER

CAL ESC/CLR

AUTO-

SCALE RECALL

PRT SCR

15 13

Caption Brief Description

1 Standby switch Turns the tester On or Off

2 Function hardkeys Including hardkeys: Mode, FREQ/DIST,

AMPTD, MEAS/VIEW, SYS, Hold/Run, Limit

and Marker

3 Preset hardkey Returns the tester to a known state

4 Enter hardkey Confirms a selection or configuration

5 CAL hardkey Enters a calibration procedure

6 ESC/CLR hardkey Escapes from a procedure or clears

characters or numbers

7 Save and Recall keys For file operation

8 Auto scale hardkey Sets the amplitude borders automatically

9 Print screen hardkey For quick screen capture

10 Knob Selects an option or edits a number

11 Brightness hardkey Adjusts the screen brightness

12 Buzzer Beeps differently on different actions

13 Light sensor Adjusts brightness automatically

14 Softkeys Indicates current menu functions

15 Screen Displays measured traces and status

16 Strap handle For hand carry

Inhaltsverzeichnis

Andere Keysight Technologies Prüfgeräte Handbücher

Keysight Technologies

Keysight Technologies InfiniiVision 1000 X-Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies U3020AS16 Handbuch

Keysight Technologies

Keysight Technologies 85058V Handbuch

Keysight Technologies

Keysight Technologies U3045AM04 Handbuch

Keysight Technologies

Keysight Technologies U9361C Bedienungsanleitung

Keysight Technologies

Keysight Technologies IOT8700 Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies InfiniVision 6000L Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies N2142A Bedienungsanleitung

Keysight Technologies

Keysight Technologies E7515A Bedienungsanleitung

Keysight Technologies

Keysight Technologies N4917CPCA Bedienungsanleitung

Keysight Technologies

Keysight Technologies Infiniium 90000A Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies P9241A Benutzerhandbuch

Keysight Technologies

Keysight Technologies 16454A Bedienungsanleitung

Keysight Technologies

Keysight Technologies U3020AS62 Handbuch

Keysight Technologies

Keysight Technologies UXR Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies InfiniiVision 1000 X Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies U3020AD01 Handbuch

Keysight Technologies

Keysight Technologies N5222-60124 Installations- und Betriebshandbuch

Keysight Technologies

Keysight Technologies 16048G Bedienungsanleitung

Keysight Technologies

Keysight Technologies 16034E Bedienungsanleitung

Keysight Technologies

Keysight Technologies E5405A-Pro Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies 85038A 7-16 Handbuch

Keysight Technologies

Keysight Technologies 85054B Handbuch

Keysight Technologies

Keysight Technologies X Series Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung