Kipor IG2000 Bedienungsanleitung
Preface
This manual covers the construction, function and servicing procedure of KIPOR
IG2000/IG2000p/IG2000s/CG2000/CG2000s generators.
Careful observance of these instructions will result in better, safer service work.
All information, illustrations, directions and specifications included in this publication are
based on the latest product information available at the time of approval for printing. KIPOR
POWER CO., LTD, reserves the right to make changes without incurring any obligation. No
part of this publication may be reproduced without written permission.
CONTENTS
1. SPECIFICATIONS
1.1 SPECIFICATIONS
1.2 CHARACTERISTICS
1.3 PERFORMANCE CURVES
1.4 DIMENSIONAL DRAWINGS
1.5 WIRING DIAGRAM
2. SERVICE INFORMATIONS
2.1 THE IMPORTANTANCE OF PROPER SERVICE
2.2 IMPORTANT SAFETY PRECAUTIONS
2.3 SERVICE RULES
2.4 SERIES NUMBER LOCATION
2.5 MAINTENANCE STANDARDS
2.6 TORQUE VALUES
2.7 TROUBLESHOOTING
3. MAITENANCE/REGULATE
3.1 MAITENENCE SCHEDULE
3.2 ENGINE OIL
3.3 OILALARM
3.4 AIR CLEANER
3.5 SPARK PLUG
3.6 VALVE CLEARANCE
3.7 FUEL SWITCH/FUEL FILTER
3.8 FUEL TUBE/FUEL PUMP/DIAPHRAGM
3.9 SPARK ARRESTER
4. MUFFLER
5. AIR FILTER, CARBURETOR
5.1 AIR FILTER
5.2 CARBURETOR
5.3 INSPECTION
6. CONTROL PANEL
6.1 CONTROL PANEL
6.2 INSPECTION
7. LAMP CHIMNEY/SIDE COVERS/FUEL TANK/GUIDE PLATE/INVERTER UNIT
7.1 LAMP CHIMNEY
7.2 SIDE COVER
7.3 FUEL TANK
7.4 FAN SHIELD/ENGINE FIXED PLATE
7.5 GUIDE PLATE
7.6 INSPECTION
8. RECOIL STARTER/FAN SHIELD/IGNITION COIL
8.1 DISASSEMBLY, ASSEMBLY
8.2 RECOIL STARTER
8.3 INSPECTION
9. GENERATOR, TRIGGER
9.1 GENERATOR
9.2 CHECK
9.3 REGULATE
10. CYLINDER COVER/ROCKER ARM-
10.1 DISASSEMBLY, ASSEMBLY
10.2 INSPECTION
11. CRANKCASE COVER/CAM TIMING DRIVING CHAIN WHEEL
11.1 DISASSEMBLY
11.2 CRANKCASE COVER
11.3 ROLLER CHAIN
11.4 CHAIN PALLET AND PRESSURE PLATE
11.5 CRANKCASE COVER
11.6 INSPECTION
12. CRANKSHAFT/PISTON
12.1 DISASSEMBLY/ASSEMBLY
12.2 PISTON
12.3 INSPECTION
1. SPECIFICATIONS
1.1 SPECIFICATIONS
Dimensions and weights
Model IG2000/IG2000p/CG2000 IG2000s/CG2000s
Overall Length 520mm 665mm
Overall Width 300mm 300mm
Overall Height 425mm 425mm
Net Weight 22Kg 24Kg
Engine
Model KG158
Type 4-stroke,OVC, single cylinder, Gasoline engine
Displacement 105.6ml
Bore x stroke 58 x 40mm
Maximum horsepower(KVA) 2.2/4500
Compression ratio 8.5:1
Cooling system Forced air-cooled
Ignition system T.C.I
Ignition timing 27°B.T.D.C
Spark plug A7RTC
Carburetor Float type, Horizontal, butterfly valve type
Air cleaner Semi-dry type
Governor Electronic control type
Lubrication system Forced splash
Oil capacity 0.4L
Starting system Recoil starter
Stopping system Primary circuit ground
Fuel used Automotive unleaded gasoline
Generator
Model KD20/KD20A/KM20/KM20A
Generator type Multi pole rotation type
Generator structure Self-ventilation drip-proof type
Excitation Self-excitation (Magnet type)
Voltage regulation system PWM(Plush width modulation)
Phase Three phase
Rotating direction Clockwise (Viewed from the generator)
Frequency regulation AC-DC-AC conversion (Inverter type)
1
1.2 CHARACTERISTICS
Model IG2000/IG2000s/IG2000p/CG2000/CG2000s
Maximum output AC 2.0KVA
Rated output AC 1.6KVA
Rated output DC 100W
Rated frequency 50Hz 60HZ 60HZ
Rated voltage AC 230V 120V 240V
Rated voltage DC 12V
Rated current AC 7.0A 13.3A 6.7A
Rated current DC 8.3A
Power factor 1.0cosφ
Voltage variation rate Momentary
Average
Averagetime
10%max.
1.5%max.
3 sec. max.
Voltage stability ±1%
Frequency variation rate Momentary
Average
Averagetime
1%max.
1%max.
1 sec. max.
Frequency stability ±0.1%
Insulation resistance 10MΩmin.
AC circuit protector 9.3A(230V) 17.9A(120V) 9.0A(240V)
DC circuit protector 10A
Fuel tank capacity 3.5L
Fuel consumption (at rated load) 500g/KW.h
Operating hours (at rated load) 3.2h
Noise level (Zero load to full load) 58-65dB(A)/7m
2
1.3 PERFORMANCE CURVES
The curves show performance of the generator under average condition.
Performance may vary to some degree depending on ambient temperature and humidity.
The output voltage will be higher than usual when the generator is still cold, immediately after the engine
starts.
●AC External characteristic curves
●DC External characteristic curves
3
1.4 DIMENSIONAL DRAWING Unit: mm
a. IG2000\IG2000p/CG2000
b. IG2000s/CG2000s
4
1.5 WIRING DIAGRAM
a. IG2000/IG2000s
b: IG2000p
c. CG2000/CG2000s
5
Andere Handbücher für IG2000
2
Dieses Handbuch passt für folgende Modelle
4
Inhaltsverzeichnis
Andere Kipor Tragbarer Generator Handbücher
Kipor
Kipor IG3000 Installationshandbuch
Kipor
Kipor IG6000 Bedienungsanleitung
Kipor
Kipor KDE16EA Bedienungsanleitung
Kipor
Kipor IG2000 Bedienungsanleitung
Kipor
Kipor IG6000 Bedienungsanleitung
Kipor
Kipor IG6000 Bedienungsanleitung
Kipor
Kipor IG2000 Installationsanleitung
Kipor
Kipor IG3000 Bedienungsanleitung
Kipor
Kipor KGE12E Bedienungsanleitung
Kipor
Kipor K DE12000TA3 Bedienungsanleitung
Kipor
Kipor IG1000 Bedienungsanleitung
Kipor
Kipor IG3000 Bedienungsanleitung
Kipor
Kipor IG1000 Installationsanleitung
Kipor
Kipor IG3000 Bedienungsanleitung
Kipor
Kipor IG3000 Bedienungsanleitung
Kipor
Kipor IG1000 Bedienungsanleitung
Kipor
Kipor KGE2400X Bedienungsanleitung
Kipor
Kipor Camping-Mate KGE1300Tc Bedienungsanleitung
Kipor
Kipor Sinemaster IG200 Bedienungsanleitung
Kipor
Kipor IG1000 Bedienungsanleitung
