Kirisun PT6500 Bedienungsanleitung

PT6500 User’s Manual

Page 1 of 30

PT6500 User’s Manual

CONTENTS

■Unpacking and checking

◆Supplied accessories

■Preparation

◆Charging the battery

◆Installing/Removing the battery pack

◆Installing the antenna

■Getting acquainted

■Basic Operation

■Programmable Button functions

■VOX

■Copy mode

■Whole setting

◆Time-out Timer（TOT）

◆Battery Saving

◆Low battery warning

◆Voice Annunciation of Channel Number

◆CTCSS/ DCS

■User’s resolution

◆Busy Channel Lockout（BCL）

◆Receiving squelch mode

◆DTMF signaling

◆2TONE signaling

◆Transmit start/over signaling (PTT ID)

■Problems and troubleshooting

■Major Specifications

■Status setting

PT6500 User’s Manual

Page 2 of 30

FCC Warning:

PT6500-02 is a a occupational equipment. And it operate with a duty factor not exceeding 50%.

The EUT cannot worn on the body.

The us version of this transmitter operates solely on us frequencies. The user is not able to

select on non-us frequencies.

PT6500 User’s Manual

Page 3 of 30

█Unpacking and checking

Unpack the transceiver carefully. We recommend that you identify the items listed in the following table

before discarding the packing material. If any items are missing or have been damaged during

shipment, please contact the dealer immediately.

Supplied accessories

Item Quantity

Antenna 1

Battery 1

Charger 1

Power adapter 1

Hand strap 1

User’s Manual 1

█Preparation

◆Charging the battery

Connect the power adapter with the battery charger. Plug the adapter into an AC wall outlet

and the indicator turns green.

ower a

atter

PT6500 User’s Manual

Page 4 of 30

Place the battery or transceiver into the charger slot, and make sure the transceiver has

been turned off.

Make sure the battery is well connected with charger, then the indicator turns red or flashes,

then the charger gets in the state of charging automatically.

When battery is fully charged the indicator turns green.

The performance will be at the best condition if you remove the battery when the green

indicator is on. Then remove the power adaptor from the wall outlet.

The charger will enter the protection mode when the yellow indicator flashes, which means

the temperature or the circuit is abnormal. Do not charge the battery at this moment, just

remove the battery and turn off the power of the charger.

Notes:

* The battery is not fully charged in the factory. Before the initial use, please charge the new

battery.

* The KB-36A Ni-MH battery/KB-36C Li-ion battery of this company is adaptable with this

machine.

* When you charge the battery the first time or after long time storage (2 months), several

times of charging is needed. Make sure the battery is charged at least once every three

months.

* Do not charge the battery again if it is charged fully or not in the low-pressure warning

mode, otherwise, its life will be shortened or it will be damaged. Remove the battery from

the charger after charging.

* When you use the KB-36A battery, and the transceiver is in the low-pressure warning

PT6500 User’s Manual

Page 5 of 30

mode, recharge the battery before use. Do not power on by force, otherwise, its life will be

shortened or it will be damaged.

* There is a protection circuit in KB-36C battery, so the power will be cut off at too low

battery.

◆Installing/Removing the battery pack

To install the battery pack:

Match the 3 bulges of the battery pack with the corresponding holes at the rear Button of

the transceiver.

To install the battery pack:

Then firmly press the battery pack downwards to lock it in place until a click is heard.

To remove the battery pack:

Use your thumb to press the belt clip, and one side of your index finger to press the release

button; and then pull the battery away from the transceiver.

PT6500 User’s Manual

Page 6 of 30

Notes:

* Do not cause short-circuit or throw the battery to the fire.

* Do not disassemble the battery by your self.

◆Installing the antenna

Screw the antenna into the connector at the top of the transceiver by holding the Button of

the antenna and turn it clockwise until secure.

Getting acquainted

PT6500 User’s Manual

Page 7 of 30

The functions of the components are as follows:

A. LED Indicator

Lights red while transmitting;

Lights green while receiving a signal.

B. Power/Volume Switch

Turn clockwise till a click is heard to switch on the radio.

Turn counterclockwise till a click is heard to switch off the radio.

Rotate to adjust the volume after turning on the radio.

C. Channel Selector

Rotate to select the channel 1-128.

D. Antenna

E. Top Button (programmable button)

It is recommended to be set as the emergency warning Button.

F. Side button 1 (programmable button)

G. PTT（PUSH-TO-TALK）:

To make a call, press and hold the PTT button, then speak into the microphone with

normal voice.

H. Side button 2 (programmable button)

I. Button

Return and delete button in the menu.

J. Button

Select Button.

K. Button

Select Button.

L. Button

Enter and Confirm Button.

M. Numeric keypad

Explanation for the screen

PT6500 User’s Manual

Page 8 of 30

5Basic Operation

1. Switch On

Switch on the radio by turning the Power/Volume switch clockwise

till a click is heard, then the radio will be in the state of stand by

and you will hear a beep if the dealer has set it.

2. Adjust Volume

Press the button preset as canceling squelch to listen to the background noise and rotate

the Power/Volume switch to adjust volume.

Icon Description

Signal intensity

SVC

Compandor

Disturbance Frequency

Busy channel lockout

Scanning

Key lockout

Signal reminder is programmed

Battery volume, flashes when the

battery power goes too low

PT6500 User’s Manual

Page 9 of 30

3. Select a Channel

Rotate the channel selector to select channels. You will hear voice from the speaker while

receiving proper signals.

As shown in the above right figure:

Zone 1 is the zone of current channel (8 zones from 0 to 7).

H is the transmit power of the channel, H stands for high power, M for middle power while

L for low power.

CHANNEL 1 is the current channel (128 zones from 1 to 128).

4. Make a Call

To make a call, press PTT, and speak in normal voice and please keep your mouth 3~4

cm away from the microphone.

PT6500 User’s Manual

Page 10 of 30

5. Receive a Call

Release the PTT button to receive a call.

Your dealer can set CTCSS, DCS, 2 Tone signaling on you radio channels by PC software.

If you select a channel that has been preset with the tone signaling, you will not hear any

other calls except those from your own system.

6. Operation on menu: press “ ”button to enter the menu or confirm any contents;

press “ ” button to return to the previous menu or cancel the set. When entered the

menu, select the sub-menu with the “channel selector”, “ “or “ ”.

The

is as

follows

菜单

Utilities

(应用选项)

Phone

(电话)

Rptr/Talkarnd

（脱网）

Speak mode

（喇叭模式）

Zone Edit

（区编辑）

Call

（联系列表）

Ch Edit

(信道编辑)

Scan

(扫描)Back Light

(背景灯)Squelch Levevl

(静噪等级)

Key tone

(按键音)Scrambler

(扰频)

Power Level

(功率水平)

Companding

(压缩扩展)

Save

(省电)

Rx FRQ

(接收频率)Tx FRQ

(传输频率)Rx Ctcss

(接收亚音)Tx Ctcss

(传输亚音)

开/关开/关0～9级高、中、低

开/关开/关开/关关闭省电或

1:1、1:2、1:4

传输亚音频率

设置

接收亚音频率

设置

传输频率设置

接收频率设置

对讲机号码名单

选择区域

选择静噪模式

Andere Handbücher für PT6500

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kirisun Transceiver Handbücher

Kirisun

Kirisun PT3208 Kurzanleitung

Kirisun

Kirisun PT56803 Bedienungsanleitung

Kirisun

Kirisun PT8000 Bedienungsanleitung

Kirisun

Kirisun PT2208 Bedienungsanleitung

Kirisun

Kirisun PT4200 Bedienungsanleitung

Kirisun

Kirisun PT360002 Bedienungsanleitung

Kirisun

Kirisun PT6800 Bedienungsanleitung

Kirisun

Kirisun PT578 Bedienungsanleitung

Kirisun

Kirisun PT6200 Bedienungsanleitung

Kirisun

Kirisun PT800003 Bedienungsanleitung

Kirisun

Kirisun PT8200 Bedienungsanleitung

Kirisun

Kirisun PT800001 Bedienungsanleitung

Kirisun

Kirisun PT6500 Bedienungsanleitung

Kirisun

Kirisun PT6700 Bedienungsanleitung

Kirisun

Kirisun PT2508 Bedienungsanleitung

Kirisun

Kirisun PT3600 Bedienungsanleitung

Kirisun

Kirisun PT5200 Bedienungsanleitung

Kirisun

Kirisun PT3600 Bedienungsanleitung

Kirisun

Kirisun PT8200 Bedienungsanleitung

Kirisun

Kirisun PT568 Bedienungsanleitung

Kirisun

Kirisun PT3600 Bedienungsanleitung

Kirisun

Kirisun PT7200 Bedienungs- und Wartungshandbuch

Kirisun

Kirisun PT 3800(1) Bedienungsanleitung

Kirisun

Kirisun PT260 Bedienungsanleitung

Beliebte Transceiver Handbücher anderer Marken

Yaesu

Yaesu FT-7B Bedienungsanleitung

Kenwood

Kenwood ProTalk TK-3201 Bedienungsanleitung

Texas Instruments

Texas Instruments TLK10232 Bedienungsanleitung

Mizuho

Mizuho MX-2 Produkthandbuch

Kenwood

Kenwood TK-3180 Bedienungs- und Wartungshandbuch

Blitz

Blitz MJ-398U Bedienungsanleitung

Utilicom

Utilicom LongRanger 2050 Bedienungsanleitung

Standart

Standart HX290UKA Bedienungsanleitung

Altronix

Altronix Pace1PTM Bedienungsanleitung

ELECRAFT

ELECRAFT KX2 Bedienungsanleitung

Zodiac

Zodiac K3 Bedienungsanleitung

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Bedienungsanleitung

Kenwood

Kenwood TK-2217 Bedienungsanleitung

Siemens

Siemens PSO 4000 Bedienungsanleitung

Kenwood

Kenwood TS-590SG Bedienungsanleitung

Midland

Midland G8E-BT Handbuch

ComNav

ComNav Mariner X2 Bedienungsanleitung

Uniden

Uniden UH820 Series Bedienungsanleitung