KitchenAid INTEGRATED COMPACTOR Bedienungsanleitung

INTEGRATED COMPACTOR

Use & Care Guide

For questions about features, operation/performance, parts, accessories or service, call: 1-800-422-1230 or visit our website at

www.kitchenaid.com

In Canada, for assistance, installation or service, call: 1-800-807-6777 or visit our website at www.KitchenAid.ca

Table of Contents............................................................................................................2

9872215

TABLE OF CONTENTS

COMPACTOR SAFETY..................................................................2

INSTALLATION INSTRUCTIONS..................................................3

Unpacking ....................................................................................3

Location Requirements................................................................4

Electrical Requirements ...............................................................5

Undercounter Installation.............................................................5

COMPACTOR USE.........................................................................7

How Your Compactor Works.......................................................7

Loading.........................................................................................7

WHISPER QUIET™ Plus System.................................................7

Starting Your Compactor.............................................................8

Using Solid (Locked) Cycle..........................................................8

Using the Air Filter or Freshener ..................................................8

Removing a Filled Bag .................................................................8

Installing a New Bag.....................................................................8

COMPACTOR CARE ......................................................................9

Changing the Air Filter or Freshener ............................................9

Cleaning........................................................................................9

TROUBLESHOOTING ..................................................................10

ASSISTANCE OR SERVICE.........................................................11

In the U.S.A. ...............................................................................11

In Canada ...................................................................................11

Accessories ................................................................................11

WARRANTY ..................................................................................12

COMPACTOR SAFETY

You can be killed or seriously injured if you don't

immediately follow instructions.

You can be killed or seriously injured if you don't

follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you

what can happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all

safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or

“WARNING.” These words mean:

INSTALLATION INSTRUCTIONS

Installer: Leave Use and Care Guide with the homeowner.

Homeowner: Keep Use and Care Guide for future reference and

for local electrical inspector’s use, if required.

Unpacking

IMPORTANT:

■Do not grasp console to move compactor.

■Begin in the room where the compactor will be located.

1. Remove compactor from shipping carton. Remove all

protective packaging materials such as tape and shipping

pads. Use a mild detergent and warm water to remove waxy

residue caused by protective shipping material. Dry

thoroughly with a soft cloth. For more information, see

“Cleaning.”

2. Be sure the power cord is attached to the cord clip on the

rear of the compactor.

3. Place the 2 corner posts from the carton on the floor near the

compactor. Open the compactor drawer and remove any

shipping materials or other items from the drawer. Do not

remove the compactor bag. Grasp the handle and raise the

front of drawer until it clears the drawer stops. Grasp sides of

drawer and lift drawer out of compactor. Place the drawer on

the 2 corner posts.

IMPORTANT SAFETY INSTRUCTIONS

WARNING:When using an electrical appliance, basic precautions should always be followed, including the

following:

Read all instructions before using the compactor.

Close supervision is necessary when used by or

near children. Do not allow to be used as a toy, or

to run unattended at any time. Lock Key Switch

when not in use and store key out of reach of

children.

Do not touch moving parts.

Do not operate with a damaged cord set, plug,

motor, or after damage in any manner. Have the

compactor examined, repaired or adjusted by an

authorized serviceperson.

Use only for intended use as described in this

manual. Do not use other than manufacturer's

recommended attachments.

Do not take apart the compactor. Incorrect

reassembly can cause electric shock when

subsequently used.

Handle a loaded trash bag with care. Sharp objects

can pierce the bag and cause injury. Do not

overload trash bag with heavy material such as

glass.

■ This compactor is intended for household use only.

Do not compact toxic or volatile flammable material

such as oily rags and insect sprays. Do not compact

lighted cigarettes, cigars, or other hot or burning

items. Do not overload the compactor.

■

SAVE THESE INSTRUCTIONS

WARNING

Excessive Weight Hazard

Use two or more people to move and install

compactor.

Failure to do so can result in back or other injury. A. Cord clip

4. Place the other 2 corner posts on the floor to the side of the

compactor. Grasp the sides of the compactor cabinet and put

compactor on its side on top of the corner posts. Remove the

shipping base from the bottom of the compactor.

Location Requirements

Product Dimensions

Cutout Dimensions

Clearance Dimensions

A. Leveling legs

B. Shipping base

34¹⁄₈"

(86.7 cm)

24"

(61 cm)

15"

(38.1 cm)

A. Grounded eletrical outlet must be a minimum

of 3" (7.6 cm) away from surrounding cabinets

or nearby walls as shown. It can be placed

either to the left or the right side of the

compactor.

A. Leave 6" (15.2 cm) of clearance space to the right side of

the compactor in order to remove the compactor bags.

B. Leave 23" (58.4 cm) of clearance in front of the compactor

in order to fully open or remove the compactor drawer.

24" min.

(61 cm)

34¹⁄₄" min.

(87 cm)

18" min.

(45.7 cm)

3" min.

(7.6 cm)

15¹⁄₄" min.

(38.7 cm)

Electrical Requirements

Recommended Grounding Method

This compactor is for use on a single phase, 115-volt, 60 Hz, AC

only 15- or 20-amp fused and properly grounded circuit and is

equipped with a grounding plug as shown below. It is

recommended that a separate circuit serving only this appliance

be provided.

This compactor must be grounded while in use to reduce the risk

of electric shock. The compactor is equipped with a three-

conductor cord and 3 prong grounding-type plug to fit the proper

grounding-type receptacle. The green (or green and yellow)

conductor in the cord is the grounding wire. Do not connect the

green (or green and yellow) wire to a live terminal.

Undercounter Installation

NOTE: Proper installation is your responsibility. Make sure you

have everything necessary for correct installation. It is the

personal responsibility and obligation of the customer to contact

a qualified installer to assure that electrical installation meets all

National and Local codes and ordinances.

Tools needed:

Gather the required tools and parts before starting installation.

IMPORTANT:

■Do not grasp control panel to move compactor.

■Slide compactor onto cardboard or hardboard before moving

compactor across floor to avoid floor covering damage.

■Do not allow the rear frame of the compactor to touch the

floor covering when lifting or moving compactor.

Undercounter Installation

NOTE: Installation hardware is not provided with full cabinet

models.

1. Measure the height of your cabinet opening. The top of the

compactor should be at least ¹₈"(3 mm) from the top of the

cabinet opening.

The rear wheels are preset for a cabinet opening height of

34¹⁄₄" (87 cm) (Position 1).

To adjust for other cabinet opening heights:

■Loosen self-tapping screw just enough to clear stud from

hole in position “1.”

■Move the rear wheel and stud to position “2”or “3”as

needed for your cabinet opening measurement:

Position 2: 34¹⁄₄" to 34⁷⁄₁₆" (87 to 87.5 cm)

Position 3: 34⁷⁄₁₆" to 34⁵⁄₈" (87.5 to 88 cm)

NOTE: To level the unit in position 3, you may need to

add shims under the leveling legs.

■Tighten screw. Repeat for other rear wheel.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Failure to follow these instructions can result in

death, fire, or electrical shock.

Do not use an extension cord.

Do not use an adapter.

Do not remove ground prong.

■Level ■Phillips No. 2 screwdriver

■Tape measure ■Flat-blade screwdriver

■Pliers ■⁵⁄₁₆" Hex-head socket wrench

■Scissors ■Utility knife

A. Wheel bracket assembly

B. Cabinet

C. Locating stud

D. Self-tapping screw (pivot)

2. Use pliers to lower leveling legs away from cabinet. Adjust

legs so there will be a ¹⁄₈" (3 mm) to ¹₄" (6.4 mm) space

between the top of the compactor and the top of the cabinet

opening. Stand the compactor upright.

3. For model with cabinet, remove the plastic plugs from the

compactor cabinet top.

4. Move the compactor close to its final position.

5. Plug into a grounded 3 prong outlet.

6. Determine if you want the compactor frame or drawer front

flush with the cabinet front.

Using the two #8-18 x ⁵₁₆" screws, install the retaining

brackets to cabinet top as needed:

■If the compactor frame is to be flush with the cabinet

front, place retaining bracket screws through “1.”

■If the compactor drawer front is to be flush with the

cabinet front, place retaining bracket screws through “3.”

■If the compactor is to be midway between “1”and “3,”

place the retaining bracket screws through “2.”

7. Slowly lift the front slightly and roll compactor into the cabinet

opening.

Using the two #8-18 x ¹₂" screws, fasten the retaining

brackets to the countertop with the mounting screws.

If brackets cannot be attached to the underside of

countertop, attach mounting clips to brackets. Fasten

compactor to cabinet front with mounting screws through

mounting clips.

Countertop mounting

Cabinet-front mounting

8. Grasp sides of compactor drawer and place bottom of

drawer into tracks. Lift at the handle so drawer will go over

drawer stops. Close drawer. Check to see if drawer opens

freely. If the toe plate rubs against floor, see “Adjusting the

Toe Plate”for further instructions.

Adjusting the Toe Plate

If the toe plate rubs the floor covering, the toe plate clearance

may be changed as follows:

1. Mark on each side of the toe plate the amount of toe plate

that rubs the floor covering.

2. Remove the drawer from the unit. (See Step 3 in the

“Unpacking”section.)

3. Use a ruler and a pencil or chalk to draw a line between the

marks on each side of toe plate.

4. Use scissors or utility knife to cut toe plate along line.

5. Replace drawer. If toe plate still rubs floor covering, repeat

Steps 1-4.

Installing a Custom Panel

Dimensions

Use these dimension drawings to create a custom panel for use

without a trim kit. The panel should be a minimum of ¹⁄₂" (13 mm)

thick.

Installation

1. Align the bottom of the custom panel with the bottom of the

drawer front.

NOTE: The bottom of the custom panel should not extend

below the bottomof the drawer front.

2. Secure the panel from the back using four #8 x 1" wood

screws as shown.

A. Countertop

B. Retaining bracket

A. Countertop

B. Retaining bracket

C. Mounting screw

A. Mounting clip

B. Cabinet

C. Retaining bracket

D. Mounting screw

15"

(38.1 cm)

29 ³⁄₈"

(74.6 cm)

3. Attach a 15" x ¹⁄₂" quarter-round filler along the top of the

drawer front using glue or screws.

COMPACTOR USE

How Your Compactor Works

The compacting ram is the part of the compactor which

compresses the trash. The compacting ram does not go to the

bottom of the drawer. You will not see compacting of trash the

first few times you load the compactor.

NOTE: The compactor drawer should be more than ¹⁄₂ full before

the compactor can begin to compress the load.

You may hear a noise when glass breaks. Strong glass bottles

may not break at all. The trash in a full compactor bag will be

about ¹⁄₄ the size of its original bulk.

Load bulky trash, bottles, and cans in the center of the drawer.

Bottles or cans not placed in the center may become caught

between the ram and the drawer. The Drawer Monitor Switch

then senses a “misload”and causes the ram to return to the “up”

position without compacting.

IMPORTANT: Do not push items down into compactor with

hands or feet.

NOTE: You will not see compacting of trash the first few times

you load the compactor. The compactor drawer should be about

¹⁄₂ full before the compactor can begin to compress the load.

1. Open the drawer. Lift and pull the handle or press the toe bar

to open the drawer.

NOTE: Pressing the toe bar opens the container only 3" to 6"

(7.6 cm to 15.2 cm), depending on the load.

2. Place trash in compactor.

■Wrap or cover wet or messy trash.

■Do not compact items that may develop offensive odors

such as raw meat, fish, grapefruit rinds, disposable

diapers, or personal hygiene items.

■Load bottles or cans on their sides in the center of the

drawer. Do not load bottles in an upright position.

3. Close the drawer.

WHISPER QUIET™ Plus System

The WHISPER QUIET™Plus system helps to maintain a quiet

home environment during compactor operation.

NOTE: The contents of the trash may affect the noise level of

your compactor. See “Compactor Use.”

A. Custom panel

B. 15"x

¹⁄₂

" Quarter-round

C. #8 x 1" Wood screws

D. Toe guard

E. Washer

F. To e g u ar d s cr e w

Starting Your Compactor

1. Open container. Load trash.

2. Leave Key-Knob in ON position.

3. Set Solid Cycle switch to OFF.

4. Close container.

5. Lift foot pedal UP to START cycle.

Using Solid (Locked) Cycle

The Solid (Locked) Cycle extends the use of the bag by putting

constant pressure on the trash to keep it from springing back.

Regular use of solid cycle can increase bag capacity up to

25 percent.

During Solid Cycle, the ram will stay in the down position for

extra compacting. The drawer is locked and cannot be opened

when the ram is down.

For best results, use the Solid Cycle for at least 30 minutes at a

time.

1. Open container. Load trash.

2. Set compactor Solid Cycle switch to ON.

3. Close container.

4. Lift the foot pedal UP to START cycle.

5. Container remains LOCKED untill you RESET by lifting the

foot pedal UP.

Using the Air Filter or Freshener

1. Set the Air Filter switch to ON. The fan creates air movement

in the compactor for odor removal.

NOTE: The charcoal Air Flter works only when the Key-Knob

is in the ON position.

IMPORTANT: The air freshener will work with or without the

fan.

2. Set the Air Filter switch to OFF to turn off the fan.

Removing a Filled Bag

When the trash is compacted to the top of the drawer, remove

the bag. If the bag is too heavy, compact less trash before

emptying it in the future.

IMPORTANT: Do not push items down into compactor with

hands or feet.

1. Pull the drawer completely open.

2. Remove top of bag from bag retainer buttons. Pull up all four

bag cuffs. Close bag with twist tie provided.

3. Push Side-Lock Latch down and tilt drawer side open.

4. Lift out bag.

Installing a New Bag

Do not use any kind of bag other than those designed especially

for use in your compactor. Order replacement compactor bags

through your local dealer or by calling the toll-free number on the

cover or in the “Assistance or Service”section.

IMPORTANT:

Before installing a new bag, be sure:

■The drawer side is securely locked.

■The container is clean and free of debris.

1. Place folded bag into the drawer. Open bag and pull top

edges over the drawer top.

2. Lock bag in place by pulling the four prepunched holes over

the bag retainer buttons. Holes will expand over the buttons

without damaging the bag.

3. Press inside of bag against the drawer bottom, sides and

corners for a smooth fit.

COMPACTOR CARE

Your new compactor is designed to give you many years of

dependable service. However, there are a few things you are

expected to do in order to properly maintain your compactor.

This section will tell you how to clean and care for your

compactor.

Changing the Air Filter or Freshener

It is recommended that you use either the charcoal air filter or the

air freshener in the filter compartment. The solid air freshener

system is an alternative to the air filter and is designed to control

odors that might develop in the trash.

To order the correct replacement charcoal filters or air fresheners,

call the toll-free number listed on the cover or in the “Assistance

or Service”section.

1. Insert fingertips in the air filter cover and pull until the side

tabs release. Then, lift the cover to release the bottom tabs.

2. Remove the air filter by pulling the top edge of the filter. The

filter should pull out easily. Throw away used filter.

Remove the air freshener by simply lifting out of the filter

compartment. Throw away used freshener..

3. To replace air filter, push the replacement filter into place.

To replace the air freshener, place the replacement in the filter

compartment.

4. Insert the bottom tabs of the air filter cover and push in until

the side tabs snap into place.

Cleaning

Before cleaning the compactor, turn the Key-Knob (or Key-

Switch) to the OFF & LOCK position and remove it.

NOTE: Any services other than those outlined in this section

should be performed by a designated service representative.

Cleaning Exterior Surfaces

1. Wash exterior surfaces (including stainless steel) with a clean

sponge or soft cloth and a mild detergent in warm water. Do

not use abrasive or harsh cleaners. Rinse and dry thoroughly

with a soft cloth.

2. Wipe up spills right away. Some foods can damage the finish

if left on the compactor surface.

Cleaning Inside the Drawer

NOTE: You may want to wear protective gloves since there may

be bits of glass in the drawer.

1. Remove the bag. See the “Removing a Filled Bag.”

2. Press down on the lever-action lock (or Side-Lock latch).

3. Hold the lever-action lock down and tilt the side of the drawer

out until the lock clears the drawer front.

NOTE: If desired, the drawer side can be removed by tilting it

up, then lifting it out.

4. Wash the interior of the drawer with a clean sponge or soft

cloth and a mild detergent in warm water. Rinse and dry

thoroughly with a soft cloth.

5. If the drawer side was removed, slide it back into the tilted

position.

6. Press the lever-action lock (or Side-Lock Latch) down while

pushing the drawer side to the upright position.

7. Latch the drawer side by pushing up the lever-action lock (or

Side-Lock Latch).

Cleaning Inside the Cabinet

NOTE: You may want to wear protective gloves since there may

be bits of glass in the cabinet.

1. Pull the drawer out until it stops.

NOTE: Look to see how the drawer rollers move in the tracks.

It will be easier to replace the drawer after you have finished

cleaning.

2. Lift the front of the drawer to clear the stops.

3. Grasp the drawer on the sides and pull it out the rest of the

way. Set the drawer down gently.

4. Vacuum the inside of the cabinet. Liquid spills or wet trash

should be cleaned up by hand, or by using a vacuum

designed to pick up liquids.

5. Wash the inside of the cabinet with a clean sponge or soft

cloth and a mild detergent in warm water. Rinse and dry

thoroughly with a soft cloth.

6. To replace the drawer, grasp it by the sides and insert the

rollers onto the tracks.

7. Lift the front of the drawer and push it in fully past the stops.

Cleaning the Ram

NOTE: You may want to wear protective gloves since there may

be bits of glass on the ram cover.

1. Wipe glass particles off of the ram cover with a cloth or paper

towels.

2. Remove foods with a clean sponge or soft cloth and a mild

detergent in warm water. Rinse and dry thoroughly with a soft

cloth.

Cleaning Before a Vacation

If you will be away for more than a couple of days, remove the

compactor bag. Remove the Key-Knob (or Key-Switch) and store

it out of children’s reach.

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Trash is not compacting

■Is the drawer less than half-full? Drawer must be more than

half full before trash is compacted.

Your compactor won’t operate

■Is the power supply cord unplugged? Plug into a grounded

3 prong outlet.

■Has a household fuse blown, or has a circuit breaker

tripped? Replace the fuse or reset the circuit breaker. If the

problem continues, call an electrician.

■Is the drawer completely closed? Close the drawer firmly

and start the compactor again.

■Is the Key-Knob turned all the way to START? Turn the

Key-Knob (Key-Switch) fully to START and release (on some

models). See “Starting Your Compactor.”

■Did you press ON before pressing START? Press ON

before pressing START (on some models). See “Starting the

Compactor.”

The drawer won’t open

■Is the ram all the way up? Drawer will open only when ram is

fully raised.

To raise the ram on models with a Key-Knob (or Key-

Switch): Turn the Key-Knob (Key-Switch) to START and

release. See “Starting Your Compactor.”

To raise the ram on models with push button controls:

Press OFF, and then press ON. See “Starting Your

Compactor.”

■Is the Solid Cycle engaged? Drawer remains LOCKED until

you reset by lifting the foot pedal up.

There is not enough compaction or force

■Do you use the compacting cycle frequently enough?

Compacting works best when only a few items are loaded.

Bottles don’t break

■How often do you notice this? Bottles will not break every

time. The thickness of the bottle’s glass and the content of

the trash load below it may keep the bottle from breaking.

Andere Handbücher für INTEGRATED COMPACTOR

Inhaltsverzeichnis

Andere KitchenAid Müllentsorgung Handbücher

KitchenAid

KitchenAid KCDI075V0 Bedienungsanleitung

KitchenAid

KitchenAid KBDS100T - NA Batch Feed 1 HP MultiGrind Bedienungsanleitung

KitchenAid

KitchenAid KCCC151EBL1 Bedienungsanleitung

KitchenAid

KitchenAid KCDB250S1 Bedienungsanleitung

KitchenAid

KitchenAid KCDS100T - 1 HP Continuous Feed Waste... Bedienungsanleitung

KitchenAid

KitchenAid KCDS250X Gebrauchsanweisung

KitchenAid

KitchenAid KCDB250S0 Bedienungsanleitung

KitchenAid

KitchenAid INTEGRATED COMPACTOR Bedienungsanleitung

KitchenAid

KitchenAid KCDC200 Bedienungsanleitung

KitchenAid

KitchenAid ELECTRA KCDE200 Bedienungsanleitung

KitchenAid

KitchenAid Garbage Disposal Bedienungsanleitung

KitchenAid

KitchenAid Imperial KCDI250 Bedienungsanleitung

KitchenAid

KitchenAid KCDS100T0 Bedienungsanleitung

KitchenAid

KitchenAid KBDS100T - NA Batch Feed 1 HP MultiGrind Service-Handbuch

KitchenAid

KitchenAid 4151847 WHITE Bedienungsanleitung

KitchenAid

KitchenAid KaDette KCDB150 Bedienungsanleitung

KitchenAid

KitchenAid KCDB250G2 Bedienungsanleitung

KitchenAid

KitchenAid KCDS100T - 1 HP Continuous Feed Waste... Handbuch

KitchenAid

KitchenAid KBDS100T0 Bedienungsanleitung

KitchenAid

KitchenAid KWD-2C0 Bedienungsanleitung

KitchenAid

KitchenAid KCDB250G - Food Waste Disposer Bedienungsanleitung

KitchenAid

KitchenAid KCDI075VA Gebrauchs- und Wartungshandbuch

KitchenAid

KitchenAid KBDS250X - 1 HP Superba Batch Feed Disposer Installationshandbuch

KitchenAid

KitchenAid KBDS100T - NA Batch Feed 1 HP MultiGrind Bedienungsanleitung

Beliebte Müllentsorgung Handbücher anderer Marken

Insinger

Insinger I-6 Bedienungsanleitung

Franke

Franke CE-50 Betriebsanleitung

Leafield Environmental

Leafield Environmental Envirobank 140 Merkblatt

Meiko

Meiko TopCut B Bedienungsanleitung

Gladiator

Gladiator Garage Compactor Bedienungsanleitung

Maytag

Maytag DFC1500 Installationshandbuch

Weber mt

Weber mt CR 7 Betriebsanleitung

THERMEx

THERMEx WASTEMINATOR II Bedienungsanleitung

Weber mt

Weber mt CR 7-II Hd Betriebsanleitung

ROBINHOOD

ROBINHOOD SE390 Bedienungsanleitung

Whirlpool

Whirlpool GC2000PE2 Bedienungsanleitung

Scheppach

Scheppach HP3000S Montageanleitung

Haigh

Haigh Quattro Vanguard Original Bedienungsanleitung

Maxmatic

Maxmatic 5000 Technisches Datenblatt

InSinkErator

InSinkErator Model SS-100 Bedienungsanleitung

Toro

Toro FP-2200 Bedienungsanleitung

Elephants Foot

Elephants Foot eDiverter Bedienungsanleitung

Zanussi

Zanussi DU 4400 Bedienungsanleitung