Kitsound HIVE X Bedienungsanleitung

JB. 5910-a / Made in China. © KitSound is a trademark of Kondor Limited, 2017. Christchurch, Dorset, BH23 4FL, UK

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such

marks by Kondor Ltd. is under license. Other trademarks and trade names are those of their respective owners.

All trademarks are acknowledged as the property of their respective owners. Unless otherwise stated their use does not

imply that the trademark owner is aliated with KitSound or endorses the products herein.

Please recycle this packaging responsibly.

kitsound.co.uk

USER MANUAL

HIVE X

BLUETOOTH®

SPEAKER

2 3

Please read this manual carefully before use.

Box contents

• KS Hive X Bluetooth Speaker

• 3.5mm Aux cable

• Micro USB charge cable

• User manual

Functions

1. TWS button

2. MFB (Multi-function button)

3. Volume–/Previous track

4. Volume+/Next track

5. Power button

6. LED indicator

7. Battery LED

8. Microphone

9. NFC

10. Aux-in port

11. Micro USB charging port

12. USB output

KS Hive X is IPX6 waterproof

The speaker is rated IPX6. This means it protects from water jets at any direction, but is not

impervious to large amounts of water. Please do not directly immerse in water.

• To ensure that the KS Hive X speaker is waterproof, please remove all cable connections and tightly

close the cap; exposing the KS Hive X speaker to liquids without doing so may result in permanent

damage to the speaker

• Do not expose the KS Hive X speaker to water while charging; this is very dangerous as doing so

may result in personal injury and permanent damage to the speaker or power source

• IPX6 waterproof is dened as the protected against high-pressure jet spray from all directions and

temporary ooding

Instructions for use

Charging the battery

Give the speaker a full charge before its rst use.

1. Connect the USB charging cable to the Micro USB charging port (11) and plug into power

2. The Battery LED (7) will be solid red whilst charging which will take up to 6 hours

3. Once fully charged the Battery LED (7) will turn o

Note: Allow up to 8 hours for the rst charge. You can charge and play your speaker at the same time,

but it needs extra charging time.

1 32 4 5 9

4 5

Battery protection mode

If you haven’t used the speaker for 90 days, the speaker will switch to battery protection mode automatically.

To keep the rechargeable battery in good condition, please discharge and recharge speaker every

3 months, even if you use it or not.

Note: For best sound quality when the battery is below 30%, it is best to charge the Hive X.

LED lights indication

Pairing mode Flash blue quickly for new device pairing

Flash blue slowly for auto reconnection to last paired device

Paired in Bluetooth®mode Solid blue

Paired but not playing audio Flash blue every 2 seconds

Aux-in mode Solid red

TWS pairing Flash blue and red quickly

Enter TWS mode Flash blue and red every 2 seconds

TWS paired with device Slow ashing purple

TWS paired with device and

playing audio

Solid purple

Battery below 30% Flash red every 3 seconds

Charging battery Red LED on

Charging nish (around 95%) Red LED o

Pairing the Hive X to your device

1. Long press Power button (5) to turn the speaker on and it will automatically enter pairing mode

2. Turn your iOS, Android, or Windows device’s Bluetooth ON and search for new devices

3. Select ‘KS Hive X’. If asked for a passcode, enter ‘0000’, and the device will pair

4. Once connected the LED indicator (6) will be a solid blue if playing audio or slowly ashing blue

if not playing audio

Re-pairing or pairing new devices

1. Turn Bluetooth connectivity o on any previously paired devices

2. Long press the MFB (2) to re-enter pairing mode

3. Follow the ‘Pairing the Hive X to your device’ instructions

Note: If a previously paired device is not present within the Bluetooth connectivity range then

the speaker will re-enter pairing mode.

6 7

Auxiliary

1. Plug the Aux cable into the speaker’s Aux-in port (10) and your device

2. The LED indicator (6) will become a solid red colour

Once connected to the Hive X either wired or by Bluetooth, please follow the below instructions:

Function Bluetooth mode Auxiliary mode

Volume+ Short press Volume+ (4) on Hive X

or use your device

Short press or hold Volume+(4)

on Hive X or use your device

Volume– Short press Volume– (3) on Hive X

or use your device

Short press or hold Volume– (3)

on Hive X or use your device

Next Track Hold Volume+ (4) button for

2 seconds

N/A

Previous Track Hold Volume– (3) button for

2 seconds

N/A

Play/Pause Track Short press MFB (2) Short press MFB (2)

Answer Call Short press MFB (2) N/A

End Call Short press MFB (2) N/A

Reject Call Double press MFB (2) N/A

Redial Double press MFB (2) N/A

Pair with NFC

1. On your device make sure both the NFC and Bluetooth functions are switched on

2. With the Hive X powered on and not connected to another device, place your device over the

NFC (9) icon and your device will automatically pair to the speaker

3. A prompt might appear saying ‘Pair to KS Hive X’

4. Select ‘Pair’ and the Hive X will then be paired to your device

5. A double beep will sound to conrm pairing and the LED indicator (6) will ash every 2 seconds

Playing music on your speaker

Bluetooth

When connected via Bluetooth, play music on your device and the sound will play through the speaker.

Some devices may require you to select the audio output.

8 9

TWS for stereo sound

1. With both speakers turned on and in pairing mode, short press TWS button (1) on one speaker

(Master) and the LED indicator (6) will quickly ash red and blue

2. The Master speaker will automatically nd the other speaker

3. Once connected the LED indicator (6) will slowly ash purple on both speakers

4. Turn your iOS, Android, or Windows device’s Bluetooth ON and search for new devices

5. Select ‘KS Hive X’. If asked for a passcode, enter ‘0000’, and the device will pair

6. Once connected, the LED indicator (6) will be a solid purple if playing audio or slowly

ashing purple if not playing audio

Note: To cancel the TWS on both, long press TWS button (1) and they will disconnect and re-enter

pairing mode.

USB output

You can charge your device via the USB output (12), the output voltage and current is 5 V / 1 A.

• Please do not use the USB output (12) when the battery of KS Hive X is below 30% (when the Battery

LED (7) is ashing red every 3 seconds)

• It’s not available to use when powered o

Please note: Your device will have an internal amplier and if it is playing digital les like MP3s it will also

have an integrated DAC (Digital Audio Converter). If you turn the volume up to 100%, your device will be

sending a distorted signal. To avoid this, and to get the best quality from the speaker, we recommend

that you do not run your device any higher than 95% volume. Some devices output higher than others,

so you may need to reduce the volume if you experience distortion.

Care for your Hive X

Please DON’T:

• Submerge the Hive X speaker in water or spray water for over 3 minutes

• Drop the Hive X as this will invalidate your warranty.

• Open up the Hive X. There are no user serviceable parts inside

• Expose the Hive X to extreme temperatures or rapid changes of hot to cold or vice versa

Please DO:

• Clean the Hive X with a soft dry cloth and no detergents

Troubleshooting

We hope you’ve now got all the information you need to get started, but if you’re having problems

with anything, please feel free to contact us at: suppor[email protected].uk

Hereby, Kondor Ltd declares that the radio equipment type,

KSHIVEXBK Hive X Wireless Speaker, is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following

internet address: http://kondor.co.uk/product-documents.’

The use and operation of this speaker is beyond our control. Warranty of the KS Hive X is limited to defects caused by faulty manufacture

or defects in materials only. No warranty whatsoever is given or implied for damage caused by the user under any circumstances.

This does not aect your statutory rights.

Please do not attempt to open this product. There are no user serviceable parts inside, in particular if your product has an embedded,

non-replaceable battery, do not attempt to access or remove the battery as this may cause personal injury and will damage the product.

Making any attempt to open the product or carry out repair voids any and all warranties.

We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product

improvement and development.

Specications

Works with Bluetooth®V4.2

Bluetooth connectivity distance up to 15 m

S/N 80 dB

Frequency response 60 Hz – 20 kHz

Drivers 2 x 57 mm

Output RMS 2 x 10 W

Battery rechargeable Li-ion, 3300 mAh, 5 V

Play time up to 20 hours

USB charge output 5 V @ 1 A

Charging time up to 6 hours

IP ratings IPX6

Dimensions (mm) H83 x W210 x D70

Weight 0.85 kg

Inhaltsverzeichnis

Andere Kitsound Sprecher Handbücher

Kitsound

Kitsound SOUL Bedienungsanleitung

Kitsound

Kitsound CUBE Bedienungsanleitung

Kitsound

Kitsound FLAIR Bedienungsanleitung

Kitsound

Kitsound Chorus Bedienungsanleitung

Kitsound

Kitsound SOUL 2 Bedienungsanleitung

Kitsound

Kitsound BOXI MINI Bedienungsanleitung

Kitsound

Kitsound BOOMBAR 2 Bedienungsanleitung

Kitsound

Kitsound DANCEFLOOR Bedienungsanleitung

Kitsound

Kitsound Sonar Bedienungsanleitung

Kitsound

Kitsound CADET Bedienungsanleitung

Kitsound

Kitsound HAWAII 1.0 Bedienungsanleitung

Kitsound

Kitsound POCKETBOOM XB Bedienungsanleitung

Kitsound

Kitsound DIGGIT XL Bedienungsanleitung

Kitsound

Kitsound REUNION Bedienungsanleitung

Kitsound

Kitsound KS SLAM XL Bedienungsanleitung

Kitsound

Kitsound HIVE Bedienungsanleitung

Kitsound

Kitsound UPSTAGE Bedienungsanleitung

Kitsound

Kitsound IGNITE Bedienungsanleitung

Kitsound

Kitsound GLOW Bedienungsanleitung

Kitsound

Kitsound POCKETBOOM Bedienungsanleitung

Kitsound

Kitsound MINI MOVER 20 Bedienungsanleitung

Kitsound

Kitsound KS DIGGIT Bedienungsanleitung

Kitsound

Kitsound Hive 2 Bedienungsanleitung

Kitsound

Kitsound BOOGIE BUDDY Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung