Kodak Model AFT Bedienungsanleitung

KODAK EKTAGRAPHIC III Slide Projector, Model AFT

The KODAK EKTAGRAPHIC III Slide Projector, Model AFT, is a modified version

of the standard Model A projector. A timer-with-fade feature was added

specifically for use in cinema pre-show applications. It was available to a limited

number of companies involved with theater pre-show advertising systems. It was

not for sale through normal audio-visual channels for general use.

Kodak is providing this information as there have been a few instances of AFTs

finding their way onto the internet for sale.

The cinema pre-show application included a slide projector working many

hours/day in less than pristine environments. This means that AFTs are more apt

to be candidates for maintenance.

Unlike other slide projectors sold for general use, the AFT did not ship with the

following items:

.No user manual

.No slide tray

.No lamp

.No cabled remote

.No lens

It did ship with two documents as follows:

1) Laminated sheet “How to Use” (see document following)

2)“Important Maintenance Tips” (see document following)

KODAK EKTAGRAPHIC III

AFT Projector

PRODUCT DESCRIPTION

Congratulations on the purchase of your KODAK EKTAGRAPHIC III AFT Projector.

Please review this product sheet and the important maintenance instructions enclosed.

The KODAK EKTAGRAPHIC III AFT Projector is a standard KODAK EKTAGRAPHIC III

A Projector with fade and timer controls added. This projector was specifically designed

for cinema applications and therefore does not include a slide tray, lamp, lens, user manual, or

remote control.

FADE and VIEW controls

There are three controls for the special features of the AFT Projector. They are located under

the projector handle.

1. Automatic AFT mode (ON / OFF)

When this switch is ON ( I ), slides will advance automatically using the VIEW and

FADE times selected.

2. VIEW adjustment screw

Allows you to select the amount of time the slide is displayed on the screen, from

5 to 15 seconds.

3. FADE adjustment screw

Allows selection of the time it takes to fade up and down between slides, from 0.5

to 4 seconds.

NOTE: The operation will sequence as follows: fade up, change slide, fade down.

Selection of 0.5 second, for example, will fade up 0.5 seconds, change slide

1 second and fade down 0.5 seconds for a total of 2 seconds per slide change.

Important Safety Instructions

IMPORTANT:

Your KODAK EKTAGRAPHIC III AFT Projector is supplied with a 3-wire grounding

power cord to comply with UL122 and CSA222 Safety Electronics Standards.

We urge you to provide a permanent, properly installed 3-wire receptacle as the source

of power for this projector. Your projector is designed to operate with 110 to 125 volts,

60 Hz current only. Incorrect voltage could cause the projector to malfunction. Inputs in

excess of

125 volts will adversely affect lamp life.

When using your projector, always follow these basic safety precautions:

1. Read and understand all instructions before using this equipment.

2. Operate this projector with 110-125 volt 60 Hz current only. Incorrect voltage can

cause projector malfunction.

3. Close supervision is necessary when any appliance is used by or near children,

or others who may not understand the need for these precautions. Do not leave

the projector unattended during use.

4. Be careful not to touch hot parts. For lamp replacement, allow the module to

cool before touching the lamp and the surrounding area. Do not place the lamp

module on heat-sensitive surfaces.

5. Do not operate your projector if the power cord is damaged or if the projector

has been dropped or damaged.

6. Position the cord so that it is not tripped over. pulled, or placed in contact with

hot surfaces.

7. If an extension cord is necessary, use a cord with a current rating at least equal

to that of the projector. Cords rated for less amperage than the projector may

overheat.

8. Always unplug the projector from the electrical outlet before cleaning and

servicing and when not in use.

9. Allow the projector to cool before storing.

10. Do not immerse this equipment in water or other liquids.

11. Do not disassemble this projector. Use a qualified service technician when

service or repair is required. Incorrect reassemble can cause electric shock the

next time the projector is used.

12. Use only safety electrical low-voltage (SELV) devices.

13. The use of an accessory attachment not recommended by the manufacturer

may increase the risk of damage.

14. Keep the airflow vents unobstructed.

Troubleshooting Guide

PROBLEM CAUSE CORRECTION

Projector does not operate

No illumination on screen with

slide in projector gate

Slide not in proper focus on

screen

Uneven edge-to-edge focus

Autofocus motor runs

continuously

Slide fails to drop into projection

position

Uneven illumination on screen

Projector won’t cycle to next slide

Program does not start with the

correct slide

No power to projector

Power switch on Off or Fan

Lamp burned out

Lamp not sealed in socket

Slide itself not sharp

First slide in tray not properly

focused

Slide in different type of mount

from others

Projection lens installed improperly

Slide itself is not sharp

Curved-field lens used with glass,

plastic, or non-embossed mounts

Curved field lens used for rear

projection

Multi-aperture slides or matte-

surface write-on slides in tray

Tray base plate not properly

indexed

Tray not properly positioned on

projector

Slide mount warped or frayed at

corners

Projector not level or tilted too high

Projection lamp not fully seated

Condenser lens not installed or not

positioned properly in mount

Slide mount not seated properly in

projector gate

Tray not properly positioned

Slide or foreign object stuck in gate

Tray number is not aligned with the

raised index mark.

Plug power cord into suitable

electrical outlet. Set power switch

to LAMP.

Set switch to LAMP.

Install new lamp or lamp module.

Check lamp.

Examine slide for proper focus.

Focus center of first slide manually.

Focus manually.

Be sure the lens gear teeth on the

lens barrel line up with the notch on

the projector.

Examine slide.

Try a flat-field lens.

Use a flat-field lens.

Turn off autofocus.

Rotate the tray base plate until it

locks into position.

Reposition tray on projector.

Straighten mount or remount slide.

Set projector on a stand equal with

center of screen.

Check lamp.

Check condenser lens.

Check slide position and slide-

mount condition.

Reposition tray.

Remove foreign object from gate.

Reposition tray.

Warranty

Kodak warrants this KODAK EKTAGRAPHIC Slide Projector to function properly for four

years from the date of purchase.

If this KODAK EKTAGRAPHIC Slide Projector does not function properly within the

warranty period, upon submission of dated proof of purchase, Kodak will repair it without

charge, except for worn-out projector lamps. If Kodak is unable to repair the projector,

the option of replacement or refund of the purchase price will be available.

See an audiovisual products dealer for the KODAK EKTAGRAPHIC III AFT Slide

projector’s warranty coverage.

Limitations

This warranty does not cover circumstances beyond Kodak’s control, projector lamps, or

problems caused by failure to follow the care and operating instructions in the manual.

Any modification to the original design of this projector nullifies this warranty.

Warranty service will not be provided without dated proof of purchase.

Kodak makes on other express warranty for this product. Repair or replacement

is Kodak’s only obligation. Kodak will not be responsible for any consequential or

incidental damages resulting from the sale or use of this projector, regardless of

the cause of such damages.

Your Rights Under State Law

Some states do not allow the exclusion or limitation of incidental or consequential

damages, so the above limitation or exclusion may not apply to you. This warranty gives

you specific legal rights, and you may also have other rights that vary from state to

state.

How To Obtain Service Assistance

To obtain service or assistance in using your KODAK EKTAGRAPHIC Slide Projector,

see an audiovisual products dealer in your area. If one is not available, call the Kodak

Information Center at 1-800-242-2424, Monday through Friday, 8 a.m. to 7 p.m. Eastern

time. In Canada, call 1-800-465-6325, Monday through Friday, 8:30 a.m. to 5 p.m.

Eastern time. Or call Kodak in your country.

Part No. 2H2270 New 2/98. Minor revision 7/99

Printed in U.S.A.

Kodak and Ektagraphic are trademarks.

www.kodak.com/go/projectors

Maintenance

Maintenance is recommend at least every 1200 hours of operation. Dirt and dust can have an adverse

effect on lubricants used in the projector and may cause malfunctions. Projectors that are operated in

dusty environments should have maintenance more frequently.

Recommended cleaning materials:

·Lens cleaner ·Clean, soft cloth

·Glass cleaner (no solvent based cleaners ·Lens tissues

·Soft bristle brushes ·Can of compressed air

·Cotton swabs

How to clean your projector

Follow these maintenance instructions for safe, efficient cleaning of your projector. Be sure your projector

is unplugged and cool before performing any maintenance on it.

1. Clean the projector housing with a clean, soft cloth and glass cleaner.

2. Inspect the gate for cleanliness. If the gate area is dirty use a brush and compressed air to clean it.

3. If the gate rails are dirty or have a white powder coating, slides may not fall properly. Spray a cotton

swab with glass cleaner and gently scrub the rails to remove the powder buildup. Use a dry cotton

swab to remove excess cleaner.

CAUTION: When cleaning gate rails do not bend the pressure pad.

4. Loss of illumination can be caused by a dirty mirror, condenser lens, or projection lens. Remove the

lamp module. Clean the mirror using lens cleaner or clear water, and a soft lint-free cloth or lens

tissue. Do not wipe the mirror with a dry cloth.

5. Clean the condenser lens with lens cleaner or water and a lint-free cloth or lens tissue.

6. Clean the projection lens with lens cleaner or clear water. Do not clean the lens with a dry cloth.

7. Keep the air exhaust grille clean. Use compressed air and a brush to remove dirt. Inspect this area

often! If it appears dirty, your projector may require professional cleaning* and should be taken to an

Authorized Kodak Repair Shop.

*Cleaning is not covered under the Manufacturers Warranty.

Step 2

KODAK EKTAGRAPHIC III AFT Projector

Step 3

Step

Step 4

Step 6 Step 7

New 2/98. Minor revision 7/99

Part No. 2H2412 Kodak and Ektagraphic are trade arks. Printed in U.S.A.

Operation

The KODAK EKTAGRAPHIC III AFT Projector is

equipped with controls to adjust the FADE and VIEW

cycles. They are located under the projector handle. It is

shipped with factory default settings of:

·AUTOMATIC AFT mode - ON ( I

·VIEW time - 10 seconds

·FADE Up and Down - 0.5 second each (total

1 second

To use:

1. Install a loaded slide tray.

2. Turn the slide projector ON by selecting low or high lamp position on the control panel.

3. The projector will automatically advance slides, fading between slide changes, and will continue until

the projector is turned off.

To adjust VIEW control:

Using a small, flat-blade screwdriver, turn the VIEW screw clockwise or counterclockwise to increase or

decrease the amount of time you want the image projected (5 to 15 seconds .

To adjust FADE control:

Using a small, flat-blade screwdriver, turn the FADE screw clockwise to fade up and down (0.5 to

4 seconds . Total fade time is two times your selection.

NOTE: You may make these adjustments with the projector lamp either ON or OFF.

To turn off AFT mode:

Using a flat-blade screwdriver, move the Automatic AFT mode to the OFF ( O position. The projector can

now be used as a standard EKTAGRAPHIC III A Projector. Should you need a user manual for this model,

you can obtain one by calling the Kodak Information Center in the U.S. at 1-800-242-2424, or in Canada at

1-800-465-6325.

Tips

·Keep the operating environment clean; dust and dirt can negatively impact operation.

·To help maximize projector performance, clean the projector regularly following the maintenance

instructions included here.

·Keep extra lamps on hand.

·Have an extra lamp module on hand for quick lamp change. It only takes a few seconds to change a

lamp module, but it could take a while for a lamp to cool enough to change the lamp itself!

·For cooler operating temperature and longer lamp life, use an FHS lamp designed for use with

KODAK EKTAGRAPHIC Slide Projectors. If you wish to purchase this lamp, ask your local dealer to

order CAT No. 147 7678.

·Note your local dealer and service organization telephone numbers here for quick reference.

Local Kodak Dealer: _____________________________________________________________

_____________________________________________________________________________

www.kodak.co /go/projectors

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kodak Projektor Handbücher

Kodak

Kodak LUMA 350 Bedienungsanleitung

Kodak

Kodak BC4401 - Carousel 4400 Projector Einrichtungshandbuch

Kodak

Kodak Ektalite 2000 Bedienungsanleitung

Kodak

Kodak 960 Benutzerhandbuch

Kodak

Kodak DP1050 ULTRA Bedienungsanleitung

Kodak

Kodak EKTAGRAPHIC III Bedienungsanleitung

Kodak

Kodak Carousel 850H Bedienungsanleitung

Kodak

Kodak KP1300X Bedienungsanleitung

Kodak

Kodak Ektalite 1000 Bedienungsanleitung

Kodak

Kodak EKTAPRO 9020 CINE Bedienungsanleitung

Kodak

Kodak Carousel600 Referenzhandbuch

Kodak

Kodak KP1500A Bedienungsanleitung

Kodak

Kodak LUMA 350 Bedienungsanleitung

Kodak

Kodak Ektalite 500 Bedienungsanleitung

Kodak

Kodak V600 Bedienungsanleitung

Kodak

Kodak EKTAGRAPHIC 220 Bedienungsanleitung

Kodak

Kodak Slide Projector Bedienungsanleitung

Kodak

Kodak DP1050 ULTRA Installations- und Betriebshandbuch

Kodak

Kodak Carousel 850H Betriebsanleitung

Kodak

Kodak FS-10-N Fehlerbehebungshandbuch

Kodak

Kodak EKTAGRAPHIC Bedienungsanleitung

Kodak

Kodak V600 Bedienungsanleitung

Kodak

Kodak DP1100 - Digital Projector Bedienungsanleitung

Kodak

Kodak pagent 250s Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung