Kodak I3000 Series Bedienungsanleitung

A-61789/ISIS January 2016 1

Using the ISIS Driver

Contents Starting the SVT Diagnostics/Scan Validation Tool............................2

Scan Validation Tool dialog box......................................................... 5

Configuring Image settings................................................................ 6

Main tab........................................................................................ 8

Layout tab....................................................................................11

Scan Area dialog box................................................................. 12

Image Processing tab................................................................. 14

Auto Color Detect tab.................................................................16

Dropout tab................................................................................. 18

Adjustments tab.......................................................................... 19

Background tab.......................................................................... 21

Image Edge Fill tab ....................................................................22

Blank Page Detection tab........................................................... 23

About tab.................................................................................... 24

Configuring Scanner settings...........................................................25

Scanner tab................................................................................ 26

Multifeed Detection tab............................................................... 29

Imprinter tab............................................................................... 31

Log tab ....................................................................................... 33

The Kodak i3000 Series Scanners provide the ability to process

scanned images to improve their quality by using image processing

features. This guide provides information for the Kodak i3200, i3250,

i3300, 3400 and i3450 Scanners. Any differences between the scanner

models will be noted.

Image processing refers to features of the scanner that allow you to

automatically adjust each image that may improve the resulting images

(i.e., correcting any skew in the fed document, cutting the edges of the

image off to remove unneeded borders or cleaning up extraneous

“noise” on the image).

The ISIS Driver is software that communicates with the scanner. This

driver is created and maintained by EMC Captiva and is provided with

the scanner by Kodak Alaris. This driver can be used to interface with

many scanning applications that support ISIS drivers.

The information in this guide provides descriptions of the features on

the tabs of the ISIS Driver windows. The same features should be

available on the user interface of the scanning application you are

using.

2A-61789/ISIS January 2016

Starting the SVT

Diagnostics/Scan

Validation Tool

1. Select Start>Programs>Kodak>Document Imaging>SVT

Diagnostics.

2. Select ISIS for the Driver Type, the Kodak Scanner i3000 as the

Driver, and click OK. The Scan Validation Tool dialog box will be

displayed.

NOTE: For a description of the icons on the Scan Validation Tool

dialog box, see the next section entitled, “Scan Validation

Tool dialog box”.

3. Click the Setup icon . The Setup dialog box will be displayed.

A-61789/ISIS January 2016 3

4. Click ISIS to display the Preset Configurations window.

The Preset Configurations window saves custom configuration settings.

Each preset is saved locally as an ISIS Driver Preset file with a name

and optional description. Presets can be loaded or deleted from the

Preset Name list, or imported as an IDP file from another location.

There is no limit to the number of presets that can be created.

The Image and Scanner buttons in the Properties field display tabs

associated with configuring the image and scanner settings. See the

sections entitled, “Image options” and “Scanner options” later in this

guide for detailed information.

Icons: Preset Configurations

Save Preset — saves your scanner settings for the specified preset

name.

Delete Preset — deletes the specified preset name and all

associated settings.

Import Preset — imports an ISIS Driver Preset (IDP) file.

Help — displays on-line help for the window that is currently

displayed.

4A-61789/ISIS January 2016

Preset Name — displays the available presets.

Description — allows you to add a description of the selected preset.

Properties:

•Image: displays the tabs and options associated with configuring the

image settings.

•Scanner: displays the tabs and options associated with configuring

scanner settings.

OK — closes the window after saving your changes.

Cancel — closes the window without saving any changes.

A-61789/ISIS January 2016 5

Scan Validation Tool

dialog box The Scan Validation Tool (SVT) is a diagnostic application provided by

Kodak Alaris. The SVT user interface allows access to all the features

of the scanner and is a good way to verify that the scanner is working

properly. The Scan Validation Tool allows you to verify scanner

functionality using the ISIS driver.

Toolbar buttons

Setup — displays the user interface for the selected driver.

Start Scanning — scans the documents in the input tray.

Scan One Page — scans only one page.

Stop Scanning — ends the scan session.

Change/Open Driver — closes the currently opened driver and

displays the Driver Choice window.

Destination — allows you to select a directory to store scanned

images and their file names. This option is only available when

Save Images to Files is selected.

Delete — deletes the files in the destination folder with the file

name prefix you entered.

License Key — displays the License Key window.

No Image Display mode — closes the Image Viewer window

(no images will be displayed).

One Image Display mode — displays one image at a time.

Two Image Display mode — displays two images at a time.

Four Image Display mode — displays four images at a time.

Eight Image Display mode — displays eight images at a time.

About — displays the About window.

6A-61789/ISIS January 2016

Configuring Image

settings The main ISIS Driver window provides a set of several tabs for

configuring images. You can select each of these tabs and make any

choices necessary to meet your scanning needs.

NOTE: The Image Mode, Camera, Mode and Toggle Patch selections

are available with all of the Image tabs (i.e., Main, Layout,

Image Processing, etc.).

Image mode — select one of the following options:

•Normal — typically, for a document, one image is created for the

front side and another image is created for the back side. Select this

option if you want the front and back side to be individual images.

•Merged — select this option if you want one image that contains both

the front side and back side of the document. Image Merge options

are:

-Front on Top;Front on Bottom;Front on Left or Front on Right.

Camera —the selections in the Camera box list the available sides

(front and back) of an image where you can define individual image

processing values. Options include: Front Image #1, Front Image #2,

Back Image #1 and Back Image #2.

The Kodak Scanner drivers allow you to control the camera settings

independently. Some settings apply only to black and white images,

others apply to color/grayscale images.

A-61789/ISIS January 2016 7

Mode — select one of the following modes:

•Black and White: if you want your electronic image to represent all

elements of your document in black and white.

•Grayscale: if you want your electronic image to have a range of

varying shades of gray from black to white.

•Color: if you want your electronic image to be in color.

• Auto Detect Grayscale: sets auto color detect for grayscale. See

the section entitled, “Auto Color Detect tab” for more information.

•Auto Detect Color: sets auto color detect for color. See the section

entitled, “Auto Color Detect tab” for more information.

Toggle Patch — indicates you want to tell the scanner, via a toggle

patch document, if the document is color/grayscale or black and white.

•Off: no patches will be used.

•Same Side: only the side which recognizes the patch sheet will

toggle.

•Both Sides: a patch will be recognized on either the front or the back

side.

Buttons — the buttons on the bottom of the window apply to all tabs:

•Copy ⎯this function is only available when scanning two-sided

documents. The Copy button provides a convenient way to set up the

color, grayscale or black and white image settings on one side and

transfer them to the other. For example, if you highlight and set up

Front Image #1, you can use the Copy button to duplicate those

settings for Back Image #1.

•OK ⎯saves the values set on all tabs.

•Cancel ⎯closes the window without saving any changes.

•Help — displays on-line help about the options available on the

selected window.

•Default ⎯resets the values on all tabs to the factory defaults.

8A-61789/ISIS January 2016

Main tab The Main tab provides the following options.

Dots per inch (dpi) or resolution ⎯indicates the scanning resolution,

which largely determines the quality of the scanned image. The greater

the resolution, the better the reproduction. However, scanning at a

higher resolution also increases scanning time and file size.

Select a resolution value from the drop-down list. The default is 200 dpi.

Available resolutions are: 100, 150, 200, 240, 250, 300, 400, 500, 600

and 1200 dpi.

Cropping ⎯allows you to capture a portion of the document being

scanned. All cropping options can be used with color/grayscale and

black and white images. Front and Back cropping are independent,

however,for dual stream scanning, color/grayscale and black and white

cropping must be the same per side. Only one cropping option can be

assigned per image.

•Automatic: dynamically adjusts the cropping window for different

document sizes based on the edges of the image.

•Aggressive: eliminates any residual black border on any image

edges. In order to achieve this, there is a possibility that a small

amount of image data from the edge of the document may be lost.

•Fixed to Transport: (used for batches of same-sized documents)

allows you to define the area to be imaged. Fixed to Transport

cropping is used in conjunction with paper size and page layout and

assumes you are center-feeding your documents. If you are not using

center feeding, you must select the Layout tab to define your scan

area. See the section entitled, “Layout tab” later in this guide.

A-61789/ISIS January 2016 9

•Relative to Document: (zone processing): (used for batches of

same-sized documents) — zone processing is a floating fixed crop

window (the zone) located relative to the upper left corner of a

document. It allows you to select an area on the document to be

delivered in either color/grayscale or black and white format (a

separate window for both black and white and color/grayscale may

be defined). Different parameters may be selected for both the front

and back of the image.

This option may be used in conjunction with Automatic cropping

where a separate color/grayscale or black and white area to be

saved is desired. It is useful in applications where a photograph,

signature, embossment or seal appears in a consistent area for an

application (you may want that small area in color/grayscale and the

rest in black and white). To define a zone, select the Layout tab.

•Photo: the scanner will locate the photograph on the document and

return an image that contains just the photograph. If the scanner

finds more than one photograph on a document, one image is still

returned. If no photo is found, the entire document is returned. The

entire document is used to locate the photograph.

•Photo w/ROI (Region of Interest): this option is the same as Photo

(above) except that only a portion of the document (which is specified

on the Scan Area dialog box) will be used to locate the photograph.

Binarization — these options work on grayscale images and outputs a

black and white electronic image. Their strength lies in the ability to

separate the foreground information from the background information

even when the background color or shading varies, and the foreground

information varies in color quality and darkness. Different types of

documents may be scanned using the same image processing

parameters and results in excellent scanned images.

•iThresholding: allows the scanner to dynamically evaluate each

document to determine the optimal threshold value to produce the

highest quality image. This allows scanning of mixed document sets

with varying quality (i.e., faint text, shaded backgrounds, color

backgrounds) to be scanned using a single setting thus reducing the

need for document sorting. When using iThresholding, only Contrast

can be adjusted.

•Fixed Processing (FP): used for black and white and other high

contrast documents. If Fixed Processing is selected, only Brightness

can be adjusted.

•Adaptive Thresholding (ATP): separates the foreground

information in an image (i.e., text, graphics, lines, etc.) from the

background information (i.e., white or non-white paper background).

When using Adaptive Thresholding, Brightness and Contrast can be

adjusted. Use this option when scanning similar type documents.

Andere Handbücher für i3000 Series

Inhaltsverzeichnis

Andere Kodak Scanner Handbücher

Kodak

Kodak Guidelines 3000 series Betriebsanleitung

Kodak

Kodak Sidekick 1400U Bedienungsanleitung

Kodak

Kodak 5500 - EASYSHARE All-in-One Color Inkjet Handbuch

Kodak

Kodak SV 710 - EASYSHARE Digital Picture Frame Service-Handbuch

Kodak

Kodak HR 500 PLUS Bedienungsanleitung

Kodak

Kodak i1300 Series Montageanleitung

Kodak

Kodak Scanmate i1120 Bedienungsanleitung

Kodak

Kodak Scanmate i920 Bedienungsanleitung

Kodak

Kodak Scan Station 100 Plus Bedienungsanleitung

Kodak

Kodak Scan station Pro 550 Bedienungsanleitung

Kodak

Kodak i30 Bedienungsanleitung

Kodak

Kodak i4000 Plus Series Bedienungsanleitung

Kodak

Kodak Truper Series Bedienungsanleitung

Kodak

Kodak I810 - Scanner Firmware - PC Technisches Handbuch

Kodak

Kodak i4200 Bedienungsanleitung

Kodak

Kodak PS810 Bedienungsanleitung

Kodak

Kodak i30 Betriebsanleitung

Kodak

Kodak i6015 Bedienungsanleitung

Kodak

Kodak Scan Station 700 Produktinformationsblatt

Kodak

Kodak I1440 - Document Scanner Bedienungsanleitung

Kodak

Kodak A-61003 Produktinformationsblatt

Kodak

Kodak i5000 Series Bedienungsanleitung

Kodak

Kodak I6060 - Check Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung

Innova

Innova 5210 Bedienungsanleitung

Visioneer

Visioneer CardReader 100 Kurzanleitung

Rohde & Schwarz

Rohde & Schwarz TSME6 Bedienungsanleitung

Kodak i3000 Series Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken