Kodak ScanMate i900 Series Bedienungsanleitung

A-61734 March 2012 1

Scanning Setup Guide for the ISIS Driver

Contents Scan Validation Tool dialog box......................................................... 2

Configuring Image settings................................................................4

Main tab......................................................................................... 6

Layout tab...................................................................................... 8

Scan Area dialog box..................................................................... 9

Image Processing tab.................................................................. 10

Dropout tab.................................................................................. 12

Adjustments tab........................................................................... 13

Image Edge Fill tab...................................................................... 15

Blank Image Detection tab...........................................................16

Configuring Scanner settings...........................................................17

Scanner tab ................................................................................. 18

Multifeed Detection tab................................................................ 19

About tab ..................................................................................... 20

The Kodak ScanMate i900 Series Scanners provide the ability to

process scanned images to improve their quality by using image

processing features.

Image processing refers to features of the scanner that allow you to

automatically adjust each image that may improve the resulting images

(i.e., correcting any skew in the fed document, cutting the edges of the

image off to remove unneeded borders or cleaning up extraneous

“noise” on the image).

The information in this guide provides procedures for using the ISIS

Driver as well as descriptions of the features. The same features should

be available on the user interface of the scanning application you are

using.

2A-61734 March2012

The Scan Validation

Tool dialog box The Scan Validation Tool (SVT) is a diagnostic application provided by

Kodak. The SVT user interface allows access to all the features of the

scanner and is a good way to verify that the scanner is working

properly. The Scan Validation Tool allows you to verify scanner

functionality using the ISIS Driver.

Toolbar buttons

Setup — displays the user interface for the selected driver.

Destination — allows you to select a directory to store scanned

images and their file names. This option is only available when

Save Images to Files is selected.

Start Scanning — scans the documents in the input tray.

Scan One Page — scans only one page.

Stop Scanning — ends the scan session.

License Key — displays the License Key window.

No Image Display mode — closes the Image Viewer window

(no images will be displayed).

One Image Display mode — displays one image at a time.

Two Image Display mode — displays two images at a time.

Four Image Display mode — displays four images at a time.

Eight Image Display mode — displays eight images at a time.

About — displays the version of the Scan Validation Tool.

A-61734 March 2012 3

Save Images to Files — when selected, will save the images to the

specified directory.

Display Every ⎯enter the sampling rate of the images you want to

display while scanning. For example, to see every image, enter a value

of 1. To see every 10th image, enter a value of 10.

Total ⎯displays the total number of images scanned during the

current Scan Validation Tool session.

• To access the ISIS Driver double-click the Setup icon on the Scan

Validation Tool dialog box to access the main Kodak Scanner

window.

Last File ⎯displays the full path and file name for the last stored

image.

4A-61734 March2012

Configuring Image

settings The main ISIS Driver window provides a set of default tabs for

configuring images. You can select each of these tabs and make any

choices necessary to meet your scanning needs.

This section describes the ISIS Driver default interface.

NOTE: The Image Mode selections are available with all of the Image

tabs (i.e., Main, Layout, Image Processing, etc.).

Image Mode — select one of the camera options:

•Camera —the selections in the Camera box list the available sides

(front and back) of an image where you can define individual image

processing values. Options include: Front Image #1, Front Image

#2, Back Image #1 and Back Image #2.

The Kodak Scanner drivers allow you to control the camera settings

independently. Some settings apply only to black and white images,

others apply to color/grayscale images.

•Mode — select one of the following modes:

-Black and White: if you want your electronic image to represent all

elements of your document in black and white.

-Grayscale: if you want your electronic image to have a range of

varying shades of gray from black to white.

-Color: if you want your electronic image to be in color.

A-61734 March 2012 5

Buttons — the buttons on the bottom of the window apply to all tabs:

•Copy ⎯this function is only available when scanning two-sided

documents. The Copy button provides a convenient way to set up the

color, grayscale or black and white image settings on one side and

transfer them to the other. For example, if you highlight and set up

Front Image #1, you can use the Copy button to duplicate those

settings for Back Image #1.

•OK ⎯saves the values set on all tabs.

•Cancel ⎯closes the window without saving any changes.

•Help — displays on-line help about the options available on the

selected window.

•Default ⎯resets the values on all tabs to the factory defaults.

6A-61734 March2012

Main tab The Main tab provides the following options.

Dots per inch (dpi) or resolution ⎯indicates the scanning resolution,

which largely determines the quality of the scanned image. The greater

the resolution, the better the reproduction. However, scanning at a

higher resolution also increases scanning time and file size.

Choose a resolution value from the drop-down list. The default is 200

dpi. Available resolutions are: 100, 150, 200, 240, 300, 400, 600 and

1200 dpi.

Cropping ⎯allows you to capture a portion of the document being

scanned. All cropping options can be used with color/grayscale and

black and white images. Front and Back cropping are independent,

however, for dual stream scanning, color/grayscale and black and white

cropping must be the same per side. Only one cropping option can be

assigned per image. Select one of the following options:

•Automatic: dynamically adjusts the cropping window for different

sizes based on the edges of the image.

•Aggressive: eliminates any residual black border on any image

edges. In order to achieve this, there is a possibility that a small

amount of image data from the edge of the document may be lost.

•Fixed to Transport: (used for batches of same-sized documents)

allows you to define the area to be imaged. Fixed to Transport

cropping is used in conjunction with paper size and page layout and

assumes you are center-feeding your documents. If you are not using

center feeding, you must select the Layout tab to define your scan

area. See the section entitled, “Layout tab” later in this guide for more

information.

A-61734 March 2012 7

•Relative to Document: (zone processing): (used for batches of

same-sized documents) — zone processing is a floating fixed crop

window (the zone) located relative to the upper left corner of a

document. It allows you to select an area on the document to be

delivered in either color/grayscale or black and white format (a

separate window for both black and white and color/grayscale may

be defined). Different parameters may be selected for both the front

and back of the image.

This option may be used in conjunction with Automatic cropping

where a separate color/grayscale or black and white area to be

saved is desired. It is useful in applications where a photograph,

signature, embossment or seal appears in a consistent area for an

application (you may want that small area in color/grayscale and the

rest in black and white). To define a zone, select the Layout tab.

Binarization — these options work on grayscale images and outputs a

black and white electronic image. Their strength lies in the ability to

separate the foreground information from the background information

even when the background color or shading varies, and the foreground

information varies in color quality and darkness. Different types of

documents may be scanned using the same image processing

parameters and results in excellent scanned images.

•iThresholding: allows the scanner to dynamically evaluate each

document to determine the optimal threshold value to produce the

highest quality image. This allows scanning of mixed document sets

with varying quality (i.e., faint text, shaded backgrounds, color

backgrounds) to be scanned using a single setting thus reducing the

need for document sorting. When using iThresholding, only Contrast

can be adjusted.

•Fixed Processing (FP): used for black and white and other high

contrast documents.

•Adaptive Thresholding (ATP): separates the foreground

information in an image (i.e., text, graphics, lines, etc.) from the

background information (i.e., white or non-white paper background).

Threshold — changes the amount of white in the color and grayscale

image. Use the slider to select a value from 0 to 255. The default is 90.

Contrast ⎯adjusts the difference between black and white, thereby

making an image sharper or softer.

The difference between black and white is small with a low contrast

setting, so the image is softer. With a high contrast setting, the

difference between black and white is large, so the image is clearer.

Select a contrast value from -50 to 50. The default is 0.

8A-61734 March2012

Layout tab The Layout tab provides these options.

Page Size ⎯the default page size is set when a scanner is first

selected. You can choose a different page size using the drop-down

list. Page size should be set to the Scanner’s Maximum when using

the Automatic or Aggressive cropping option.

Image Orientation

•Portrait: displays the image orientation in the shape of a

conventional portrait, where height is greater than width.

•Landscape: displays the image orientation in the shape of a

conventional landscape painting, where width is greater than height.

Page Orientation — allows you to select the way you place your

documents in the scanner, Top edge first, Bottom edge first, Left

edge first or Right edge first.

Scan Area — displays the Scan Area dialog box. The Scan Area

options are only available for images when the cropping option is Fixed

to Transport or Relative to Document. See the next section, “Scan

Area dialog box” for more information.

A-61734 March 2012 9

Scan Area dialog box The Scan Area dialog box allows you to define the amount of image

data which is returned to your PC.

NOTE: Select the side and image to be defined by highlighting Front

Image #1, Front Image #2, etc. based on the cropping option

(either Fixed to Transport or Relative to Document) selected

for each of these in the Main tab. The scan areas defined for all

camera selections are independent.

Page Size ⎯the default paper size is set when a scanner is selected.

You can choose a different paper size using the drop-down list.

NOTE: Page Size and Page Layout selections also appear on the

Layout tab. If you make a change on the Scan Area dialog box,

the same selections will be displayed on the Layout tab and vice

versa.

Page Layout

•Portrait: displays the image orientation in the shape of a

conventional portrait, where height is greater than width.

•Landscape: displays the image orientation in the shape of a

conventional landscape painting, where width is greater than height.

Area

•Snap ⎯enable this option to control the dimensions of the preview

area to fixed 1/8-inch increments. This option is not available in

Pixels mode.

•X: the distance from the left end of the scanner to the left-edge of the

scanning area.

•Y: the position from the top end of the document to the top end of the

scanning area.

•Width: the width of the scanning area.

•Height: the height of the scanning area.

Units — select whether you want the area to be defined in Pixels,

Inches or Centimeters.

Inhaltsverzeichnis

Andere Kodak Scanner Handbücher

Kodak

Kodak i800 Series Bedienungsanleitung

Kodak

Kodak i1220 Plus Handbuch

Kodak

Kodak HR Bedienungsanleitung

Kodak

Kodak A-61514 Bedienungsanleitung

Kodak

Kodak Scanmate i1120 Bedienungsanleitung

Kodak

Kodak I1440 - Document Scanner Bedienungsanleitung

Kodak

Kodak i800 Series Bedienungsanleitung

Kodak

Kodak PS50 Series Bedienungsanleitung

Kodak

Kodak 9E9893A Bedienungsanleitung

Kodak

Kodak ScanMate i1150 Bedienungsanleitung

Kodak

Kodak INNOVATION I100 Bedienungsanleitung

Kodak

Kodak 1012434 Bedienungsanleitung

Kodak

Kodak Truper 3210 Bedienungsanleitung

Kodak

Kodak Digital Science 9520 Bedienungsanleitung

Kodak

Kodak 1500 Bedienungsanleitung

Kodak

Kodak Scan Station 100 Plus Bedienungsanleitung

Kodak

Kodak Scan Station 100 Plus Service-Handbuch

Kodak

Kodak Scan Station 700 Service-Handbuch

Kodak

Kodak DirectView CR 500 System Bedienungsanleitung

Kodak

Kodak i1800 Series Bedienungsanleitung

Kodak

Kodak Kodak i1840 Bedienungsanleitung

Kodak

Kodak i5000V Series Bedienungsanleitung

Kodak

Kodak i1200 series Bedienungsanleitung

Kodak

Kodak ScanMate i1150WN Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung

Innova

Innova 5210 Bedienungsanleitung

Visioneer

Visioneer CardReader 100 Kurzanleitung

Rohde & Schwarz

Rohde & Schwarz TSME6 Bedienungsanleitung