Koden MDC-1810P Bedienungsanleitung

0735

OPERATION MANUAL

KODEN ELECTRONICS CO.,LTD.

13-24, TAMAGAWA 2-CHOME, OHTA-KU

TOKYO 146-0095 JAPAN

TEL : +81 3 3756 6918

FAX : +81 3 3756 6831

http://www.koden-electronics.co.jp/

COLOR RADAR

MDC-1810P/1820P

PRINTED IN JAPAN 93142112-06

AMENDMENT HISTORY

MDC-1810P/1820P Series OPERATION MANUAL

Doc No: 93142112

No. Document No & Rev No. Date(D/M/Y) Amendments

0 93142112-00 10/12/03 First issue

1 93142112-01 14/01/04 Chapter 3, para 3.6: Entered the compass safe

distance for Display and Operation unit.

Chapter 5, para 5.2: Deleted “MAP” from the key

switch, which was mistakenly printed.

2 93142112-02 25/02/04 Preface: Added “Operation of AIS.” Chapter 1, 2, 4:

Amended the power cable type name. Chapter 3:

Added AIS spec. Chapter 6: Added the descriptions

for AIS display, operation, etc. Chapter 4: Reedited

4.6.4 by adding 4.6.4.1 and 4.6.4.2 for Display

installation methods. Reedited Para. 4.7.3 to add

more details for GAIN/STC settings. Chapter 10:

Added the AIS sentence.

3 93142112-03 01/04/04 Chapter 2, 4: Added Ferrite Core.

4 93142112-04 01/06/04 Chapter 4 Added "Auto Tune Adjustment".;Cover

Address

5 93142112-05 25/08/04 Cover

6 93142112-06 08/09/04 Chapter6.4.1.7SERIAL…Chapter10.4.5 pinNO

Amendment policy

When any change is applied in the document, only the document number of the relevant sheet(s) and

cover sheet are modified and the rest of the sheets are not changed. The document number is shown in

the footer area, right or left bottom of each sheet.

○

No part of this publication may be reproduced, transmitted, translated in any form by any means without

the written permission of Koden Electronics Co., Ltd. The technical descriptions contained in this

publication are subject to change without notice. KODEN assumes no responsibility for any errors,

incidentals or consequential damages caused by misinterpretation of the descriptions contained in this

publication.

MDC-1810P/1820P Series Preface

Operation Manual

Preface

Safety Notices

OPERATOR SAFETY

Watch for the rotating antenna:

The radar antenna will start to rotate without notice. For your safety, keep away from

the area in the vicinity of the radar antenna.

Be aware of RF Radiation Hazard:

The active radar antenna radiates powerful RF energy. Continuous exposure to RF

energy may cause harmful effects to the human body. It also causes Cardiac

Pacemaker to malfunction. A person who uses a Cardiac Pacemaker should under no

circumstances be exposed to RF radiation.

Most countries accept that RF power density levels below 100 W/m2cause no

significant RF hazard.

Distance vs. specified RF Power Density Level

Power / antenna length 100 W/m210 W/m2

12KW / 4 ft Aerial 1.55 m 4.89 m

12 KW / 6 ft Aerial 1.84 m 5.81 m

25KW / 4 ft Aerial 2.45 m 7.73 m

25 KW / 6 ft Aerial 2.82 m 8.91 m

Dangerous HIGH voltage inside:

Life threatening high voltage is present in the antenna and display units. This high

voltage may be present even after the power switch has been turned off. The high

voltage circuits are provided with protection covers and warning labels to avoid

unintentional contact with these sections. For safety reasons, switch the power off

before accessing the internal circuitry and discharge any residual voltages in

capacitors by an appropriate method. Only qualified personnel should attempt these

maintenance procedures.

93142112-02 (1)

Preface MDC-1810P/1820P Series

Operation Manual

MAINTENANCE SAFETY

Beware of residual high voltages:

High voltages may remain in the capacitors and the anode cap on the Cathode Ray

Tube several minutes after you have turned the power switch off. Wait at least five

minutes or discharge them to ground before starting your inspection.

Make sure the main power supply is OFF:

To prevent an electrical injury due to erroneous power switching, make sure that the

main power supply and the system power switch are both OFF. Also attach a safety

label showing that service is in progress.

Avoid inhaling dust:

The dust could be a temporary health hazard. When cleaning inside of the equipment,

avoid inhaling the dust.

Avoid static electricity:

Take care not to damage the ESDs (Electrostatic Sensitive Devices) due to static

electricity from carpet and cloths.

(2) 93142112-02

MDC-1810P/1820P Series Preface

Operation Manual

Various symbols used in this manual

The following symbols are used in this manual. You are requested to be fully aware of the meaning

of each symbol before carrying out inspection and maintenance on this radar system

Warning mark

To handle the equipment ignoring this sign may lead to fatal

damage or injury to human body.

Warning

Alarm mark To handle the equipment ignoring this sign may lead to injury to

human body or damage to the equipment.

Alarm

Caution mark To handle the equipment ignoring this sign may lead to a

malfunction of the equipment.

Caution

Warning High Voltage mark

To handle the equipment ignoring this sign may lead to electrical

shock to human body.

Prohibition mark

This sign indicates that a specified action is prohibited. The

prohibited action will be shown in the vicinity of the mark.

93142112-02 (3)

Preface MDC-1810P/1820P Series

Operation Manual

HOW TO USE THIS MANUAL

Scope of this manual

This manual provides necessary information for installation, operation and

maintenance of MDC-1810P/1820P radar systems.

Organization of this manual

This manual is divided into chapters for quick and easy finding of the information you

require. The titles and contents of each chapter are as follows:

Chapter 1: GENERAL DESCRIPTIONS

- Outline of the equipment

- Equipment category

- EMC compliance statement

- System configuration

- Software type name used

Chapter 2: EQUIPMENT SUPPLIED

- Standard equipment list

- Spare parts list

- Installation material list

- Optional items

Chapter 3: TECHNICAL SPECIFICATIONS

- Antenna specification

- Display specification

- ATA Specification

- Serial data and sentence used

- Power supply

- Compass Safe Distance

- Environmental specification

- Mechanical specification

(4) 93142112-02

MDC-1810P/1820P Series Preface

Operation Manual

Chapter 4: INSTALLATION

- Installation considerations

- Unpacking each component of the system

- Inspection of each component unit and accessories

- Setting the units

- Cable routing and connections

- Installation procedure

- Setting up after installation

- Setting up option

Chapter 5: BASIC OPERATION

- Introduction

- Control panel layout

- Operating controls

- Getting started

- Basic radar operations

Chapter 6: USING THE MENU

- RADAR MENU

- DISP MENU

- ADJUST MENU

- SYSTEM MENU

- MAINTENANCE MENU

- Operation of EPA

- Operation of ATA

- Operation of AIS

Chapter 7: GRAPHIC DISPLAYS

- Entering Graphic Mode

- Selecting the Graphic Display/DISPLAY ITEM SELECT MENU

- Registering or modifying the NAVLINE data / NAVLINE DATA INPUT

93142112-02 (5)

Preface MDC-1810P/1820P Series

Operation Manual

Chapter 8: TROUBLE SHOOTING AND ON BOARD SERVICING

- Information required for service

- Self diagnosis functions provided

- Trouble shooting

- On board servicing

Chapter 9: MAINTENANCE

- Periodic inspection and cleaning

Chapter 10: TECHNICAL REFERENCES

- Serial input data sentence detail

- Tracking data output sentence detail

- Radar output sentence detail

- Interface requirements

(6) 93142112-02

MDC-1810P/1820P Series Chapter 1

Operation Manual General Descriptions

Chapter 1

General Descriptions

Contents

Page No.

1.1 Outline of the equipment ....................................................... 1-1

1.2 Equipment category ............................................................... 1-1

1.3 EMC compliance statement ................................................... 1-1

1.4 System configuration............................................................. 1-2

1.5 Software type name used ...................................................... 1-2

93142112-02 Contents

MDC-1810P/1820P Series Chapter 1

Operation Manual General Descriptions

Chapter 1 General Descriptions

1.1 Outline of the equipment

The MDC-1810P/1820P series of radar is designed and manufactured to meet the

carriage requirement of the latest IMO/SOLAS regulations and its harmonized IEC

technical standards, shown below.

 IEC 60945 4th Edition 2002, General

 IEC 60936-1: Ship borne Radar

 IEC 60872-2 and 3: EPA and ATA

 IEC 61162-1: Digital Interface

The equipment is composed of two units, the antenna and the display. The antenna

unit comprises a 4 ft or 6 ft aerial, which is mounted on the transceiver unit of either 12

kW (For MDC-1810P) or 25 kW (For MDC-1820P) type. The 4 foot and 6 foot aerials

are encapsulated in a water-sealed, durable plastic case. The transceiver unit is

contained in a waterproof aluminum case. The display unit has a drip-proof cabinet

made of aluminum, and has a 250 mm diameter effective screen shown on the high

resolution 18-inch diagonal color LCD.

1.2 Equipment category

The MDC-1810P/MDC-1820P series of radar is composed of the component units in

the following categories, specified in the IEC 60945 4th edition, Para 4.4.

Antenna Unit (Type RW701A-04/06 + RB718AP/719AP):

Exposed to the weather (formerly Class X)

Display Unit (Type MRD-100P):

Protected from the weather (formerly Class B)

Operation Unit (Type MRO-100):

Protected from the weather (formerly Class B)

1.3 EMC compliance statement

This series of equipment has been tested and verified by the CETCOM Germany,

according to the IEC 60945 4th Edition, in terms of Electro Magnetic Compatibility and

atmospheric durability against the maritime environment.

93142112-02 1-1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Koden Schiffsradar Handbücher

Koden

Koden MDC-900 Series Bedienungsanleitung

Koden

Koden MDC-5000 Series Bedienungsanleitung

Koden

Koden MDC-7000P series Bedienungsanleitung

Koden

Koden MDC-2000BB Series Bedienungsanleitung

Koden

Koden MDS-1100R Series Bedienungsanleitung

Koden

Koden MDC-5004 Bedienungsanleitung

Koden

Koden MDC-2200 series Bedienungsanleitung

Koden

Koden MDC-2200 series Bedienungsanleitung

Koden

Koden MDC-2000 series Bedienungsanleitung

Koden

Koden MDC-2900 Bedienungsanleitung

Koden

Koden MDC-2000A Series Bedienungsanleitung

Koden

Koden MDC-7060 Bedienungsanleitung

Koden

Koden MDC-2900 Bedienungsanleitung

Koden

Koden MDC-7900P series Bedienungsanleitung

Koden

Koden MDC-2900 Bedienungsanleitung

Koden

Koden MDC-7006 Bedienungsanleitung

Koden

Koden MDC-5000 Series Bedienungsanleitung

Koden

Koden MDC-2200 series Bedienungsanleitung

Koden

Koden RA40C Bedienungsanleitung

Koden

Koden MDC-5204 Bedienungsanleitung

Koden

Koden MDC-2240 Bedienungsanleitung

Koden

Koden MDC-900 Series Bedienungsanleitung

Koden

Koden MDC-5200 SERIES Bedienungsanleitung

Koden

Koden MDC-2900 Bedienungsanleitung

Beliebte Schiffsradar Handbücher anderer Marken

Furuno

Furuno 1751 MARK-2 Bedienungsanleitung

RADAC

RADAC WaveGuide 5 Onboard 2 Bedienungsanleitung

JRC

JRC JMA-9922-6XA Bedienungsanleitung

Furuno

Furuno 1931 MARK-2 Bedienungsanleitung

JRC

JRC JMR-9230-S Bedienungsanleitung

Furuno

Furuno FR-2010 Bedienungsanleitung

Furuno

Furuno FAR-3210 Bedienungsanleitung

Furuno

Furuno 1751 Bedienungsanleitung

Furuno

Furuno FCR-902 Bedienungsanleitung

Garmin

Garmin GMR 18 XHD Bedienungsanleitung

Furuno

Furuno FCR-2139S-BB Bedienungsanleitung

Garmin

Garmin GMR 40 Betriebsanleitung

JRC

JRC JMA-5212-4 Bedienungsanleitung

Simrad

Simrad R5000 Bedienungsanleitung

JRC

JRC JMR-7230-S3 Bedienungsanleitung

Sailor

Sailor SP4400 Bedienungsanleitung

Furuno

Furuno 841 MARK-2 Bedienungsanleitung

JRC

JRC JMA-5312-6 Bedienungsanleitung