Koden MDC-7060 Bedienungsanleitung

MDC-7000/7900 Series Revision History

0093169010-10 i

MDC-7000/7900 Series Operation Manual

Doc No: 0093169010

Document Revision History

No.

Doc. No.- Rev. No.

Date Revised

(Y/M/D)

Revised Content

0093169010-00

2016/07/13

First edition

0093169010-01

2016/09/07

Chapter 11

0093169010-02

2016/10/14

In case no Heading and Speed signals, Introduction,

Chapter 2, Chapter 3, Chapter 4, Chapter 6, Chapter

9, Chapter 10, Chapter 11

0093169010-03

2016/12/12

Chapter 1, Chapter 2, Chapter 6, Chapter 7, Chapter

0093169010-04

2017/02/09

Chapter 6, Chapter 7, Chapter 11

0093169010-05

2017/04/18

Chapter 2, Chapter 7, Chapter 9

0093169010-06

2017/05/11

For Your Safe Operation, Chapter 6

0093169010-07

2017/06/28

Chapter 6, Chapter 11

0093169010-08

2017/09/25

Configuration items

0093169010-09

2018/03/06

Configuration items, Chapter 11

0093169010-10

2018/03/13

MDC-7000/7900 OC Series→MDC-7000/7900 Series,

Chapter 2, Chapter 10

Document No. Revised Version Norm

When part of the document needs to be revised, the document has advanced revision number.

The document No. is indicated at the lower right side on the cover and at the left or right side of the

footer region of each page.

No part of this publication may be reproduced, transmitted, translated in any from by any means without

the written permission of Koden Electronics Co., Ltd. The technical descriptions contained in this

publication are subject to change without notice. Koden assumes no responsibility for any errors,

incidentals or consequential damages caused by misinterpretation of the descriptions contained in this

publication.

Important Notice MDC-7000/7900 Series

ii 0093169010-10

Important Notice

For copy and transcription of this Operation Manual (hereinafter referred to as this manual),

permission from Koden is needed. Koden prohibits the un-authorized copy and transcription of this

manual.

If this manual is lost or damaged, consult a dealer of Koden or Koden.

The specification of the products and the contents in this manual are subject to change without

notice.

The contents displayed on the menu of product may be different from the expression of this

manual. The fonts and shapes of the keys and menus in the illustration may differ from the actual

ones, and some parts may be omitted.

Koden is not liable for damages and troubles arisen from misunderstanding of the contents in this

manual.

Koden is not liable for any damages caused by earthquake, lightning, wind and flood damage and

fire for which Koden is not responsible, and actions by third parties, other accidents, customer’s

unintended error/abuse and the use under other abnormal conditions.

Koden is not liable for damages of accompaniment (change/loss of memorized content, loss of

business profit, stop of business) arisen from use or failure of our products.

If the stored data are changed or lost, irrespective of causes of troubles and damages, Koden is

not liable for them.

Koden is not liable for any damages arisen from malfunction caused by combination of software

and connected equipment in which Koden is not engaged.

MDC-7000/7900 Series For Your Safe Operation

0093169010-10 iii

For Your Safe Operation

Symbols used in this Operation Manual

This manual uses the following symbols. Understand the meaning of each symbol and implement the

maintenance and inspection.

Symbol

Meaning

Warning Symbol

This symbol denotes that there is a risk of death or serious injury when not

dealt with it correctly.

High Voltage Danger Symbol

This symbol denotes that there is a risk of death or serious injury caused

by electric shock when not dealt with it correctly.

Caution Symbol

This symbol denotes that there is a risk of slight injury or damage of device

when not dealt with it correctly.

Prohibition Symbol

This symbol denotes restriction of the specified conduct. Description of the

restriction is displayed near the mark.

IMPORTANT

Important Symbol

This mark indicates important area where attention is needed. This may

include possible data lose or other issues that may interfere with radar

operation.

Reference Symbol

This mark shows the part to be referred to concerning this description.

For Your Safe Operation MDC-7000/7900 Series

iv 0093169010-10

Caution related to Equipment

Caution, high voltage inside.

High voltage that may cause severe injury or death is present. High

voltage remains in circuit even after power is turned off. High voltage

circuit has a protective cover with a warning label. Make sure to turn off

power and discharge capacitors before working on the system. Only

authorized personnel should access this circuit for repair and

maintenance.

Confirm main power is turned off before servicing the

equipment.

If power switch is turned on while working on the system, possible

severe injury or death may occur due to high voltage. Make sure main

power is off and a label “Work In Progress”is attached to the breaker

powering the system.

Caution related to dust

Inhaling dust may cause Arespiratory disease. When cleaning the inside

of equipment, be careful not to inhale dust. Wearing a safety mask is

recommended.

When choosing equipment location

Do not install the equipment where it is excessively damp, humid and

under direct dripping water.

Caution related to static electricity

Static electricity may be generated from floor carpet or synthetic clothes.

Static may destroy some electronics parts of the circuit and therefore

anti-static measures should be done.

Prohibited matter

Any Display and Scanner unit combination other than specified in the

manual is prohibited and will void manufacturer’s warranty.

MDC-7000/7900 Series For Your Safe Operation

0093169010-10 v

Caution rellated to Handling

Caution related to rotating aerial

The radar antenna may start rotating to rotate without notice. Please stand

clear from the antenna for your safety.

Caution related to electromagnetic disturbance

The operating Antenna & Scanner unit radiates high-energy

electromagnetic wave. It may cause harmful effect for human body due to

its continuous radiation. As International regulation says, electromagnetic

waves less than 100 watt/m2does not have a harmful effect on human

bodies, but some kind of medical devices such as heart pacemakers are

sensitive even under the low energy electromagnetic wave. Any personnel

with such a device should keep away from the electromagnetic wave

generating position at all times.

Specified power density and distance from the radar (in accordance with the

provision as specified in IEC 60945)

Model name

Transmission power /

Antenna length

100W/m2

50W/m2

10W/m2

MDC-7060

MDC-7960

6kW / 4 feet Antenna

1.5 m

2.1 m

4.5 m

6kW / 6 feet Antenna

1.7 m

2.4 m

5.4 m

MDC-7010

MDC-7910

12kW / 4 feet Antenna

2.1 m

2.9 m

6.4 m

12kW / 6 feet Antenna

2.4 m

3.4 m

7.6 m

12kW / 9 feet Antenna

2.9 m

4.1 m

9.0 m

MDC-7020

MDC-7920

25kW / 4 feet Antenna

2.9 m

4.1 m

9.2 m

25kW / 6 feet Antenna

3.5 m

4.9 m

10.9 m

25kW / 9 feet Antenna

4.1 m

5.8 m

13.0 m

For Your Safe Operation MDC-7000/7900 Series

vi 0093169010-10

Do not disassemble or modify. It may lead to trouble, fire, smoking or

electric shock. In case of trouble, contact our dealer or our company.

In case of smoke or fire, switch off the power in the boat and the power of

equipment. It may cause fire, electric shock or damage.

Caution related to remaining high voltage.

A high voltage may remain in the capacitor for several minutes after

system is powered off. Before inspecting inside, wait at least 5 minutes

after powering off or discharging the remaining electricity in an appropriate

manner. Then, start the work.

The information displayed in this unit is not provided directly for your

navigation. For your navigation, be sure to see the specified material.

Use properly rated fuse. If incorrect fuse is used, it may cause fire, smoke

or damage.

MDC-7000/7900 Series Break in procedure of stored radar

0093169010-10 vii

Break in procedure of stored radar

Following procedure is recommended for “Break In” of the stored radar.

Otherwise the radar sometimes exhibits unstable transmitting operation

such as arcing at its initial operation after long period of storage and make

the operation more difficult.

1. Extend preheat time as long as possible (preferably 20 to 30

minutes).

2. Set the pulse width to the shortest one and start the operation.

When the operation in the shortest pulse is stable then go to

operation in longer pulse and repeat the similar step until the

operation reaches to the final pulse condition.

Used battery and radar disposal MDC-7000/7900 Series

viii 0093169010-10

Used battery and radar disposal

Treatment of the used lithium ion battery

To dispose of built-in lithium ion battery (CR2032) in this radar, insulate each terminal with tape, and

wrap in plastic bag.

The disposal and collection rules may be different depending on each municipal district. Obey the

directions of each district.

Disposal of this radar

This radar shall be disposed according to the municipal regulations or rules.

A high-energy density lithium ion battery is installed in this radar.

Improper disposal of a lithium ion battery is discouraged as the battery

has a possibility of short-circuiting. If it gets wet, the generation of heat,

explosion or ignition may occur resulting in an injury or fire.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Koden Schiffsradar Handbücher

Koden

Koden MDC-1810P Bedienungsanleitung

Koden

Koden RA40C Bedienungsanleitung

Koden

Koden MDC-2200 series Bedienungsanleitung

Koden

Koden MDC-5004 Bedienungsanleitung

Koden

Koden MDC-5004 Installationshandbuch

Koden

Koden MDC-5000 Series Bedienungsanleitung

Koden

Koden MDS-1100R Series Bedienungsanleitung

Koden

Koden MDC-2000BB Series Bedienungsanleitung

Koden

Koden MDC-5000 Series Bedienungsanleitung

Koden

Koden MDC-5204 Bedienungsanleitung

Koden

Koden MDC-2200 series Bedienungsanleitung

Koden

Koden MDC-5200 SERIES Bedienungsanleitung

Koden

Koden MDC-2200 series Bedienungsanleitung

Koden

Koden MDC-2900 Bedienungsanleitung

Koden

Koden MDC-7000P series Bedienungsanleitung

Koden

Koden MDC-2000A Series Bedienungsanleitung

Koden

Koden MDC-2900 Bedienungsanleitung

Koden

Koden MDC-7006 Bedienungsanleitung

Koden

Koden MDC-2240 Bedienungsanleitung

Koden

Koden MDC-7900P series Bedienungsanleitung

Koden

Koden MDC-900 Series Bedienungsanleitung

Koden

Koden MDC-2000 series Bedienungsanleitung

Koden

Koden MDC-5000 Series Bedienungsanleitung

Koden

Koden MDC-2900 Bedienungsanleitung

Beliebte Schiffsradar Handbücher anderer Marken

Furuno

Furuno 1751 MARK-2 Bedienungsanleitung

RADAC

RADAC WaveGuide 5 Onboard 2 Bedienungsanleitung

JRC

JRC JMA-9922-6XA Bedienungsanleitung

Furuno

Furuno 1931 MARK-2 Bedienungsanleitung

JRC

JRC JMR-9230-S Bedienungsanleitung

Furuno

Furuno FR-2010 Bedienungsanleitung

Furuno

Furuno FAR-3210 Bedienungsanleitung

Furuno

Furuno 1751 Bedienungsanleitung

Furuno

Furuno FCR-902 Bedienungsanleitung

Garmin

Garmin GMR 18 XHD Bedienungsanleitung

Furuno

Furuno FCR-2139S-BB Bedienungsanleitung

Garmin

Garmin GMR 40 Betriebsanleitung

JRC

JRC JMA-5212-4 Bedienungsanleitung

Simrad

Simrad R5000 Bedienungsanleitung

JRC

JRC JMR-7230-S3 Bedienungsanleitung

Sailor

Sailor SP4400 Bedienungsanleitung

Furuno

Furuno 841 MARK-2 Bedienungsanleitung

JRC

JRC JMA-5312-6 Bedienungsanleitung