Koden MDC-2900 Bedienungsanleitung

Declaration of Conformity

(As required by Article 6.3 of Directive 1999/5/EC-RTTE Directive)

Declares under his sole responsibility that the produced Marine Radar System manufactured

Koden Electronics Co., Ltd.

5278 Uenohara

Uenohara-Shi,

Yamanashi-Ken

409-0112

Japan

Telephone +81 554 20 5865 Telefax +81 554 20 5880

Intended for Worldwide use as a Marine Radar for use aboard non-SOLAS vessels and

identified by the type number MDC-2960 / MDC-2910 / MDC-2920 to which this

declaration refers has been tested to the essential radio test suites required by the notified

body and is in conformity with the standards

EN 60945 : 2002 ( Clauses 9,10 & 12 )

EN 62252 : 2004 ( Clauses 4.8, 4.33, 5.8, 5.33 and Annex D )

ITU-R Recommendation RM.1177

and complies with the essential requirements of Directive 1999/5/EC

Conformity procedure under Annex IV of 1999/5/EC (Technical Construction file) has been

undertaken by

QinetiQ Ltd. Cody Technology Park Ively Road, Farnborough GU14 0LX. United Kingdom

The Technical Construction File is held by Mr Heinz Hoghoff at

Koden Elektronik GmbH,

Am Gewerbepark 15,

D-64823 Gross-Umstadt / Hessen

Germany

Telephone +49 6078 2056 Telefax +49 6078 73824

Kenichi Chiwaki, QA Manager.

Koden Electronics Co., Ltd.

02 Feb. 2009

Declaration of Conformity

(As required by Article 6.3 of Directive 1999/5/EC-RTTE Directive)

Declares under his sole responsibility that the produced Marine Radar System manufactured

Koden Electronics Co., Ltd.

5278 Uenohara

Uenohara-Shi,

Yamanashi-Ken

409-0112

Japan

Telephone +81 554 20 5865 Telefax +81 554 20 5880

Intended for Worldwide use as a Marine Radar for use aboard non-SOLAS vessels and

identified by the type number MDC-2960BB / MDC-2910BB / MDC-2920BB to which

this declaration refers has been tested to the essential radio test suites required by the notified

body and is in conformity with the standards

EN 60945 : 2002 ( Clauses 9,10 & 12 )

EN 62252 : 2004 ( Clauses 4.8, 4.33, 5.8, 5.33 and Annex D )

ITU-R Recommendation RM.1177

and complies with the essential requirements of Directive 1999/5/EC

Conformity procedure under Annex IV of 1999/5/EC (Technical Construction file) has been

undertaken by

QinetiQ Ltd. Cody Technology Park Ively Road, Farnborough GU14 0LX. United Kingdom

The Technical Construction File is held by Mr Heinz Hoghoff at

Koden Elektronik GmbH,

Am Gewerbepark 15,

D-64823 Gross-Umstadt / Hessen

Germany

Telephone +49 6078 2056 Telefax +49 6078 73824

Kenichi Chiwaki, QA Manager.

Koden Electronics Co., Ltd.

02 Feb. 2009

MDC-2900 Series Revision History

0093129012-06 i

MDC-2900 Series Operation Manual

Doc No: 0093129012

Document Revision History

No. Doc. No.- Rev. No. Revised Date

(Y/M/D)

Revised Content

0 0093129012-00 2009/04/28 First edition

1 0093129012-01 2009/06/05 Full revision

2 0093129012-02 2009/07/24 Full revision

3 0093129012-03 2009/09/25 Chapter 7

4 0093129012-04 2010/01/26 Contents, Chapter 1, Chapter 2, Chapter 4, Chapter 8

5 0093129012-05 2010/04/15 Chapter 1, Chapter 4

6 0093129012-06 2011/11/15 Important Notice, Chapter 2, Chapter 3, Chapter4

TT(ATA)→TT(ARPA)

Document No. Revised Version Norm

When part of the document needs to be revised, the document has advanced revision number.

The document No. is indicated at the lower right side on the cover and at the left or right side of the

footer region of each page.

No part of this publication may be reproduced, transmitted, translated in any from by any means without

the written permission of Koden Electronics Co., Ltd. The technical descriptions contained in this

publication are subject to change without notice. Koden assumes no responsibility for any errors,

incidentals or consequential damages caused by misinterpretation of the descriptions contained in this

publication.

Important Notice MDC-2900 Series

ii 0093129012-06

Important Notice

For copy and transcription of this Operation Manual (hereinafter referred to as this manual),

permission from Koden is needed. Koden prohibits the un-authorized copy and transcription of this

manual.

If this manual is lost or damaged, consult a dealer of Koden or Koden.

The specification of the products and the contents in this manual are subject to change without

notice.

The contents displayed on the menu of product may be different from the expression of this

manual. The fonts and shapes of the keys and menus in the illustration may differ from the actual

ones, and some parts may be omitted.

Koden is not liable for damages and troubles arisen from misunderstanding of the contents in this

manual.

Koden is not liable for any damages caused by earthquake, lightning, wind and flood damage and

fire for which Koden is not responsible, and actions by third parties, other accidents, customer’s

unintended error/abuse and the use under other abnormal conditions.

Koden is not liable for damages of accompaniment (change/loss of memorized content, loss of

business profit, stop of business) arisen from use or failure of our products.

If the stored data are changed or lost, irrespective of causes of troubles and damages, Koden is

not liable for them.

Koden is not liable for any damages arisen from malfunction caused by combination of software

and connected equipment in which Koden is not engaged.

MDC-2900 Series For Your Safe Operation

0093129012-06 iii

For Your Safe Operation

Symbol used in this Operation Manual

This manual uses the following symbols. Understand the meaning of each symbol and implement the

maintenance and inspection.

Symbol Meaning

Mark for warning

This symbol denotes that there is a risk of death or serious injury when not

dealing with it correctly.

Mark for danger high voltage

This symbol denotes that there is a risk of death or serious injury caused by

electric shock when not dealing with it correctly.

Mark for caution

This symbol denotes that there is a risk of slight injury or damage of device

when not dealing with it correctly.

Mark for prohibition

This symbol denotes prohibition of the specified conduct. Description of the

prohibition is displayed near the mark.

IMPORTANT

Mark for important matters

This mark denotes that there is a possibility that data loss may interfere the

operation or that the expected result may not be obtained when the radar is

not dealt correctly.

Mark for reference

This mark shows the part to be referred to concerning this description.

For Your Safe Operation MDC-2900 Series

iv 0093129012-06

Caution Item on Equipment

Caution on a high voltage inside.

A high voltage, which may risk your life, is used. This high voltage

remains in the circuit after you have powered off switch. To prevent

touching the high voltage circuit inadvertently, the protective cover is

provided to the high voltage circuit and the high voltage caution label is

affixed. Ensure to power off switch for your safety and discharge the

electricity remaining in the capacitor before starting to check. An

engineer authorized by our company should inspect and maintain the

circuit.

Be sure to switch off the power in the boat.

If the power switch is inadvertently powered on during work, you will be

electrified. To prevent such accident from occurring, ensure to switch off

the power in the boat and the power of equipment. Furthermore, it is

safer to hang the caution tag with description of [Under Work] near the

power switch of equipment.

Caution on dust

Inhaling dust may cause A respiratory disease. When cleaning the inside

of equipment, be careful not to inhale dust. Wearing a safety mask is

recommended.

Caution on location of equipment

Do not install the equipment where it is excessively damp and suffers

from excessive water drops.

Caution on static electricity

The static electricity may be generated from the carpet on the floor in the

cabin or clothes made of synthetic fiber. The static electricity may

destroy the electronic parts on the circuit board. Handle the circuit board,

taking the suitable anti-static measures.

MDC-2900 Series For Your Safe Operation

0093129012-06 v

Caution Item on Handling

Caution on the rotating aerial

The radar antenna may start to rotate without notice. Please

stand clear from the antenna for your safety.

Caution

Caution on electromagnetic disturbance

The operating antenna & scanner unit radiates high-energy electromagnetic

wave. It may cause harmful effect for human body due to its continuous

irradiation. As International regulation says, electromagnetic waves less than

100 watt/m2does not have a harmful effect on human bodies, but some kind of

medical devices such as heart pacemakers are sensitive even under the low

energy electromagnetic wave. Any personnel with such a device should keep

away from the electromagnetic wave generating position at all times.

Specified power density and distance from the radar (in accordance with the

provision as specified in IEC 60945)

Model name Xmit power/

Antenna length

100W/m250W/m210W/m2

6kW / 4 feet Antenna 1.09m 1.55m 3.46m

6kW / 6 feet Antenna 1.30m 1.84m 4.11m

MDC-2960

MDC-2960BB

6kW / 9 feet Antenna 1.55m 2.19m 4.89m

12kW / 4 feet Antenna 1.55m 2.19m 4.89m

12kW / 6 feet Antenna 1.84m 2.60m 5.81m

MDC-2910

MDC-2910BB

12kW / 9 feet Antenna 2.19m 3.09m 6.90m

25kW / 4 feet Antenna 2.37m 3.36m 7.50m

25kW / 6 feet Antenna 2.82m 3.99m 8.91m

MDC-2920

MDC-2920BB

25kW / 9 feet Antenna 3.35m 4.74m 10.60m

For Your Safe Operation MDC-2900 Series

vi 0093129012-06

Do not disassemble or modify. It may lead to trouble, fire, smoking or

electric shock. In case of trouble, contact our dealer or our company.

In case of smoke or fire, switch off the power in the boat and the power of

equipment. It may cause fire, electric shock or damage.

Caution on the remaining high voltage.

A high voltage may remain in the capacitor for several minutes after you

have powered off. Before inspecting inside, wait at least 5 minutes after

powering off or discharging the remaining electricity in an appropriate

manner. Then, start the work.

The information displayed in this unit is not provided directly for your

navigation. For your navigation, be sure to see the specified material.

Use the specified fuse. If un-specified fuse is used, it may cause a fire,

smoke or damage.

MDC-2900 Series Disposal of used cell and this radar

0093129012-06 vii

Disposal of used cell and this radar

Treatment of the used lithium ion cell

To dispose of built-in lithium ion cell (CR-2032) in this radar, insulate each terminal with scotch tape, etc.

and wrap in plastic bag, etc.

The disposal and collection rules may be different depending on each municipal district. Obey the

directions of each district.

Disposal of this radar

This radar shall be disposed according to the municipal regulations or rules.

A high-energy density lithium ion cell is built in this radar.

Improper disposal of a lithium ion cell is discouraged as the cell has a

possibility of short-circuiting. If it gets wet, the generation of heat,

explosion or ignition may occur resulting in an injury or a fire.

Andere Handbücher für MDC-2900

Inhaltsverzeichnis

Andere Koden Schiffsradar Handbücher

Koden

Koden MDC-5000 Series Bedienungsanleitung

Koden

Koden MDC-2900 Bedienungsanleitung

Koden

Koden MDC-5004 Installationshandbuch

Koden

Koden MDC-2200 series Bedienungsanleitung

Koden

Koden MDC-2000BB Series Bedienungsanleitung

Koden

Koden MDC-2000 series Bedienungsanleitung

Koden

Koden MDC-5004 Bedienungsanleitung

Koden

Koden MDC-2900 Bedienungsanleitung

Koden

Koden MDC-5200 SERIES Bedienungsanleitung

Koden

Koden MDC-900 Series Bedienungsanleitung

Koden

Koden MDC-7900P series Bedienungsanleitung

Koden

Koden MDC-5000 Series Bedienungsanleitung

Koden

Koden RA40C Bedienungsanleitung

Koden

Koden MDC-2240 Bedienungsanleitung

Koden

Koden MDC-5000 Series Bedienungsanleitung

Koden

Koden MDC-1810P Bedienungsanleitung

Koden

Koden MDC-2200 series Bedienungsanleitung

Koden

Koden MDC-7006 Bedienungsanleitung

Koden

Koden MDC-7060 Bedienungsanleitung

Koden

Koden MDC-7000P series Bedienungsanleitung

Koden

Koden MDC-900 Series Bedienungsanleitung

Koden

Koden MDC-2200 series Bedienungsanleitung

Koden

Koden MDS-1100R Series Bedienungsanleitung

Koden

Koden MDC-2000A Series Bedienungsanleitung

Beliebte Schiffsradar Handbücher anderer Marken

Furuno

Furuno 1751 MARK-2 Bedienungsanleitung

RADAC

RADAC WaveGuide 5 Onboard 2 Bedienungsanleitung

JRC

JRC JMA-9922-6XA Bedienungsanleitung

Furuno

Furuno 1931 MARK-2 Bedienungsanleitung

JRC

JRC JMR-9230-S Bedienungsanleitung

Furuno

Furuno FR-2010 Bedienungsanleitung

Furuno

Furuno FAR-3210 Bedienungsanleitung

Furuno

Furuno 1751 Bedienungsanleitung

Furuno

Furuno FCR-902 Bedienungsanleitung

Garmin

Garmin GMR 18 XHD Bedienungsanleitung

Furuno

Furuno FCR-2139S-BB Bedienungsanleitung

Garmin

Garmin GMR 40 Betriebsanleitung

JRC

JRC JMA-5212-4 Bedienungsanleitung

Simrad

Simrad R5000 Bedienungsanleitung

JRC

JRC JMR-7230-S3 Bedienungsanleitung

Sailor

Sailor SP4400 Bedienungsanleitung

Furuno

Furuno 841 MARK-2 Bedienungsanleitung

JRC

JRC JMA-5312-6 Bedienungsanleitung