Kogan HYBRID+ Bedienungsanleitung
HYBRID+ SMART WATCH
KAHBWCHWHTA & KAHBWCHBLKA
OVERVIEW
USB port
Charging base
Heart rate detector
Middle button
Up button
Mechanical hands
Down button
1. Connect the USB cable to the USB power adapter.
2. Connect the other end of the USB cable to the charging base.
3. Connect the USB power adapter to a power outlet.
4. Lay the back of the watch on the charging base to charge the watch.
CHARGING
Notes:
Fully charge the watch before using it; it takes about two hours to complete a full
charge. When using a computer USB port or other devices as a charging source it
may take up to 3 hours to fully charge the watch.
Use the charger only on a flat and stable surface.
If there is an obstacle between the watch and the charging base, the watch may
not charge properly.
After charging the watch, turn off the power to the charger. To avoid damaging
the watch, use the original charging accessories provided.
Do not use the charging device if it is damaged.
Disconnect the charging device during the cleaning of the watch, during a
thunderstorm or after a prolonged period of inactivity.
Do not attempt to disassemble or modify the watch, the charging cable, or the
charging base.
Do not twist or pinch the charging cable.
Do not attempt to remove or replace the battery. The substances contained in this
product and the battery can cause damage to the environment or health. Ensure
to dispose of it properly in accordance with local regulations.
Battery
The fully charged battery can last for about 3 days. If the charge is insufficient, the smart
functions will be automatically deactivated, and the hands will continue to indicate the time
for approximately 30 days.
WARNING:
The battery life with smart functions active is estimated based
on the average use of the smartwatch. The actual duration may vary
depending on the use of the device and based on the amount and time of
activity of the functions and notifications.
Download the app
Scan the QR code below to download LeMovt, or search for “LeMovt” in the Apple App
Store and Google Play Store to download and install the app. LeMovt supports
smartphones with Bluetooth 4.2, and Android 6.0 + or iOS 9 +.
Register an account
1. Ensure that the mobile device has a stable internet connection (through Wi-Fi or
cellular networks).
2. Open the LeMovt app on your phone. Register the product account with an email
address by clicking Email Registration on the page.
3. For the initial pairing, press any button on the watch to activate the device and
ensure the Bluetooth function on the mobile device is active.
Watch timing
After the binding is successful, complete the time adjustment operation of the watch
manually, or enter the time adjustment process through the app’s watch calibration setting.
Screen interaction
The watch screen will dim by default after 5 seconds. This can be adjusted through the app
to intervals of 5 seconds, 15 seconds, 30 seconds, and 60 seconds.
APP INSTALLATION
Button Function Action Description
Up Button
Screen off state Click The button function is set on the
app side and the pointer date is
displayed by default. Features
include second-time zone, date,
day of the week, music play or
pause, volume +, volume-.
Bright screen status
Click
Middle
Button
Screen off: light up
the screen Click
Screen lit: switch
interface Click
Start function Long
press
Down
Button
Screen off state Click The button function is set
through the app and the pointer
week is displayed by default.
Features include (second-time
zone, date, day of the week,
music play or pause, volume +,
volume-)
Screen on status Click
Binding to the mobile phone
The watch is bound to the mobile device by Bluetooth, so it must be enabled for these
functions to operate.
Initialised state, the watch
screen display is lit
Activated state, long press
the middle button and the
steps, calories, distance
interface will display
Click the middle button to
display
Click the middle button to return to the previous interface.
The binding is successful, and the watch enters the main time interface.
OPERATION
Device status display
Display layout 1
The display format can be set on the app: year/month/day, day/month/year,
month/day/year.
Display layout 2
The modules can be changed through the app.
Display layout 3
Display year, month, and day
Battery status
AM and PM are
displayed in 12-hour
format. Can be
changed to 24-hour
format in the app.
H
ours and minutes
Hours and minutes
The month and day are displayed by default. The
month and day can be set through the app.
Battery status
Display icon legend
Bluetooth not
connected
3 bar: 41%-60%
Bluetooth connected
4 bar: 61%-80%
0 bar: 0%
Full bar: 81%-100%
1 bar: 1%-20%
Display hours and minutes
2 bar: 21%-40%
12-hour display AM, PM
Factory reset
Restoring the factory settings can be performed through the app.
Open the app on the mobile device and navigate to Settings - Device Settings – Reset. The
watch will restart and will enter an inactive state. The device memory data is cleared, and
the watch is restored to factory parameters.
Charge Status
The screen will be illuminated while charging, showing the charging scroll animation. The
watch cannot be operated while charging. When the watch is fully charged, the full power
icon will appear, and the screen will dim after 30 seconds.
Synchronisation status display
The synchronisation interface is displayed during synchronisation and will display until
synchronisation is complete or interrupted.
After the synchronisation is completed, the watch will return to the previous display
interface.
OTA upgrade status
When it is detected that the server has a new firmware version, the firmware file will be
downloaded automatically. After downloading the installation package to the mobile
device, the watch will display a prompt to update the new version.
The upward arrow icon indicates that an upgrade is in progress, and the watch will restart
after the upgrade is successful.
The “X” icon indicates that an upgrade failed to load, and the watch will revert to the main
interface.
Main menu
Click the middle button to cycle through the available interfaces. Press and hold the time
interface to activate the function of finding a mobile phone.
Press and hold on the step, distance, or calorie interface to display the recorded data.
In the sleep interface, long-press the middle button to begin sleep mode. Click the middle
button again to exit.
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Kogan Betrachten Handbücher
Kogan
Kogan KAPPTMWTCGA Bedienungsanleitung
Kogan
Kogan LTWTCU1SMTA Bedienungsanleitung
Kogan
Kogan ACTIVE+ LITE SMART WATCH Bedienungsanleitung
Kogan
Kogan KAWTC8GSPYB Bedienungsanleitung
Kogan
Kogan KAWTC8GSPYA Bedienungsanleitung
Kogan
Kogan KAM1ALEDWCA Bedienungsanleitung
Kogan
Kogan KASMRWTCBLB Bedienungsanleitung
Kogan
Kogan KAWTCSSBLU Bedienungsanleitung
Kogan
Kogan LTWTCU1SMTA Bedienungsanleitung
Kogan
Kogan KAM2ALEDWCA Bedienungsanleitung
Kogan
Kogan KASMRWTCRDA Bedienungsanleitung
Kogan
Kogan KASMRWTCPKB Bedienungsanleitung
Kogan
Kogan ACTIVE+ II Bedienungsanleitung
Kogan
Kogan KAWTC8GBLKA Bedienungsanleitung
Kogan
Kogan PLAY+ Bedienungsanleitung
Kogan
Kogan M3 Bedienungsanleitung
Kogan
Kogan KAGPSWACHSA Bedienungsanleitung
Kogan
Kogan ACTIVE PRO GPS ALWAYS-ON DISPLAY SMART WATCH Bedienungsanleitung
Kogan
Kogan ACTIVE 3 PRO SMART WATCH Bedienungsanleitung
Kogan
Kogan KALXBNDBLKA Bedienungsanleitung
