Kohler K-4107X Bedienungsanleitung

Installation Guide

C3-130 Toliet Seat with Bidet Functionality



3-130

K-4107X

1194357-X2-B 2 Kohler Co.

Important Information

IMPORTANT NOTICE TO INSTALLERS!: Please leave these instructions for

the consumer. They contain important information.

In addition to installation procedures, this manual contains important care and

cleaning. Please retain for future reference.

NOTE: Some installation parts might not be provided.

NOTE: The product pictured in the installation steps may dier from the model

being installed.

Before You Begin

WARNING: Risk of electric shock, re, or personal injury.

This product must be ground. Connect to a dedicated 220-240 VAC,

50/60 Hz, 10 A circuit protected by Ground-Fault Circuit-Interrupter

(GFCI) or Earth-Leakage Circuit-Breaker (ELCB).

WARNING: Risk of electric shock, product damage. Do not immerse

or ush the product with water.

CAUTION: Risk of product damage. Do not plug in the seat until all

other installation steps have been completed.

Thank You for Choosing Kohler Company

Thank you for choosing Kohler. Kohler craftsmanship oers you a rare

combination of proven performance and graceful sophistication that will

satisfy you for years to come. The dependability and beauty of your Kohler

product will surpass your highest expectations. We’re very proud of our

products here at Kohler and we know you will be too.

Please take a few minutes to review this manual before you start installation. If

you encounter any installation or performance problems, please don’t hesitate

to contact us. Our phone numbers and website are listed on back cover.

All information in this manual is based upon the latest product information

available at the time of publication. At Kohler, we constantly strive to improve

the quality of our products. We reserve the right to make changes in product

characteristics, packaging or availability at any time without notice.

Thank you for choosing Kohler Company.

Kohler Co. 3 1194357-X2-B

Before You Begin (Cont.)

¨ Observe all local plumbing and building codes.

All information in these instructions is base on the latest product information

available at the time of publication. Kohler Co. reserves the right to make

changes at any time without notice.

¨ Do not use an extension cord with the product.

¨ Connect to a cold water supply with a pressure of 0.7-7.4 Bar (0.07-0.74MPa)

¨ Connect only to a cold water supply line carrying direct tap water.

Unplug the seat and drain the seat if functions of the seat will not be operated

for an extended period of time.

Tools and Materials

Adjustable

Wrench

Blade Screw driver Masonry Drill

Screw driver

CAUTION: Risk of product damage.

Do not install this seat in a location

where water might be splashed on the product.

CAUTION: Risk of product damage.

Do not install this seat in a location

exposed to excessive moisture where condensation might form on the

product surface. Please ensure sucient ventilation in your surroundings

to prevent possible damage to electronic components.

CAUTION: Risk of product damage. Pushing or pulling on the water

connection may cause water leakage.

CAUTION: Risk of product damage. Do not apply excessive force to

the spray wands. Product may break.

CAUTION: Risk of product damage. Take care to face right in position

to the thread while connecting seat inlet pipe, otherwise, the inlet pipe

thread may wear o and lead to water leakage.

1194357-X2-B 4 Kohler Co.

1. Match Toilet roughing-in requirement and Installation tips

2. Install an Electrical outlet

1 Distance between installation holes: 136-210 mm

Distance between instalaltion holes and tank front rim: > 20 mm

3 Distance between instalaltion holes and bowl inner rim: < 70 mm

4 Distance between installation holes and tank top rim: 460-490 mm

5 Bowl inner diameter: 370-390 mm

NOTE: The distance between the seat and the plug should be maximum 1 meter.

WARNING: Risk of electric shock, re, or personal injury.

This product must be ground. Connect to a dedicated 220-240 V, 50/60 Hz,

10A circuit protected by Ground-Fault Circuit-Interrupter(GFCI) or

Earth-Leakage Circuit-Breaker (ELCB).

¨It is recommended to use water-resistant socket. Do not use an extension

cord with the product.

NOTE: Follow local codes when determining the electrical outlet location.

¨ Route the electrical and install to a 220-240V GFCI-or ELCB-protected

receptacle.

3. Preparation

¨ Remove the existing toilet seat. Turn o the water supply to the toilet.

Flush the toilet to relieve any pressure from the water supply hoses.

¨ Position a container under the ll valve to catch any excess water.

¨ Disconnect the water supply hose from the toilet ll valve.

Kohler Co. 5 1194357-X2-B

Nut

Mounting

Plate 1

Mounting

Plate 2

Type A Type B Type C Type D

Model Number Model Name Type of

Installation Kit

One-Piece Toilet

K-3323X, K-3323X-C Santa Rosa A

K-3466X, K-3466X-C San Raphael C

K-3489X-CW Cimarron A

K-3494X-S San Martine C

K-3722X San Raphael C

K-3869X-S Aerodyne B

K-3983X-S Reach A

K-23869X Aerodyne B

Two-Piece Toilet

K-3749X Archer A

K-11462X, K-11462X-C Serif A

K-12687X-W Cimarron A

K-72635X Wellworth Class 5 A

1194357-X2-B 6 Kohler Co.

4. Install the Mounting plate

Select the type of installation kit with your product according to above table

for reference.

NOTE: Select the appropriate mounting plate according to the instruction for

mounting distance on the mounting plate.

¨ Place the mounting plate in the mounting hole above the toilet.

Screws should be inserted respectively into the washers.

NOTE: Some toilets come with threaded inserts pre-installed in the mounting

holes. For toilets with threaded inserts, the nut is not required.

For Toilets with Threaded Inserts:

Insert a bolt through the mounting plate and position the washers so they rest

in the grooves of the mounting plates. Please pay aention to washer direction.

Loosely thread the bolts into inserts. Do not overtighten for future adjustment.

For All Other Installation:

¨Position the mounting plate over the toilet mounting holes.

¨ Slide a washer onto each of the bolts. Please pay aention to washer direction.

¨ Insert a bolt through the mounting plate and the toilet mounting holes.

¨ Position the washers so they rest in the grooves of mounting plate.

¨ Thread a nut onto each of the bolts. Handtighten the nut.

Kohler Co. 7 1194357-X2-B

5. Install the Seat

¨ Align the slot on the mounting plate with the groove located below the

toilet seat. Slide the seat onto the mounting plate until you feel is snap into

place.

NOTE: The mounting plate may need to be adjusted to properly align with

the seat.

For Toilets with Threaded Inserts:

¨ To adjust the seat position, remove the seat (see Homeowners Guide) and

reposition the mounting plate needed.

Reinstall the seat. Repeat the adjustment procedure as needed until seat is

properly aligned.

Once the seat is positioned as desired, remove the seat and securely tighten

down the mounting plate.

Reinstall the seat.

For All Other Installation:

¨ No need to remove the seat for seat position adjustment. Adjust the position

seat and mounting plate only by loosening nuts and tighten nuts when they

are adjusted to properly align with the seat.

Mounting Plate

1194357-X2-B 8 Kohler Co.

6. Connect the Water Supply

¨ Connect the T-valve directly to the toilet ll valve or shut o valve as per

appropriate.

NOTE: For new G 1/2 hose, take note to ush out dirt and debris from the

inner side of the hose for several seconds before connecting to the T-valve.

Connect the T-valve to the toilet seat with the supplied hose.

NOTE: Please do not reuse the old hose.

¨ Connect the water supply to the T-valve.

¨ Turn on the water supply.

NOTE:

Flush the water supply pipes thoroughly to remove debris. Theproduct

is designed for tap water. Make sure not to use industrial water/grey water/

black water/sea water for the water supply.

¨ Check all connections for leaks and make any adjustment as needed.

CAUTION: Risk of product damage. Take care to face right in position

to the inlet pipe thread and seat thread. Take care not to crossthreaded or

overtighten connections. Hand tighten plus one-quater turn is sucient

for tightening.

CAUTION: Risk of product damage.

Be careful not to scratch the product

surfaces.

T-Valve

Inlet Hose

Supply Stop Hose

Kohler Co. 9 1194357-X2-B

7. Installation Checkout

¨ Wrap the toilet seat with plastic wrap to prevent from spraying from the

toilet during testing.

Toilet makes one short beep once it is plugged in. The nozzle stretches out

and draws back once. Backlight on the side keyboard lights up and the night

light ashes. All the actions last until the initialization process completes.

¨ Aach the clips evenly along the hose and power cord.

¨ The seat is activated by skin-to-seat contact. Unless otherwise stated, the seat

must be occupied to activate the functions. To activate the seat controls for

testing purposes, when facing the toilet, place your hand or a damp wash

cloth on the right side of the seat approximately 1/3 from the front of the seat

(sensor area).

¨ Proceed to the “Operation” section of the Homeowners Guide to test the

various seat functions.

1194357-X2-B 10 Kohler Co.



 

  



 

 





 



 

  





  

 

 

 

 



  



 





 

Inhaltsverzeichnis

Sprachen:

Andere Kohler Sanitärprodukte Handbücher

Kohler

Kohler Clearflo K-7147 Montageanleitung

Kohler

Kohler STRAYT 37331A-4ND Bedienungsanleitung

Kohler

Kohler STRAYT 37335M Bedienungsanleitung

Kohler

Kohler K-10085 Montageanleitung

Kohler

Kohler CFI230G Bedienungsanleitung

Kohler

Kohler MOXIE 99107T Bedienungsanleitung

Kohler

Kohler K-2002 Bedienungsanleitung

Kohler

Kohler K-9677 Montageanleitung

Kohler

Kohler K-7163 Bedienungsanleitung

Kohler

Kohler 6625-0 Bedienungsanleitung

Kohler

Kohler K-7116 Montageanleitung

Kohler

Kohler 10879T-4 Bedienungsanleitung

Kohler

Kohler K-16109 Bedienungsanleitung

Kohler

Kohler K-1997 Montageanleitung

Kohler

Kohler 10282 Bedienungsanleitung

Kohler

Kohler K-6284 Montageanleitung

Kohler

Kohler Quiet-Close C3-455 Bedienungsanleitung

Kohler

Kohler AVID 31137T-4 Bedienungsanleitung

Kohler

Kohler K-14663 Montageanleitung

Kohler

Kohler K-1188BR Bedienungsanleitung

Kohler

Kohler K-15286-4-PB Montageanleitung

Kohler

Kohler K-15182 Bedienungsanleitung

Kohler

Kohler CLICKER DRAIN 7119A Bedienungsanleitung

Kohler

Kohler K-2313 Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung

Sanela

Sanela SLVN 07 Bedienungsanleitung

Glacier bay

Glacier bay DORIND HD67478W-6001 Montageanleitung

Sterling Plumbing

Sterling Plumbing C741 Bedienungsanleitung